2. Sealey
  3. BHA4.V3

Sealey BHA4.V3 Operating instructions

  • Hello! I have read the instructions for the Sealey Leaflet Holder BHA4.V3. This document provides step-by-step instructions on how to assemble the holder, including how to fold the various flaps to form a stable structure. I'm ready to answer any questions you have about assembling the leaflet holder.
  • What is the first step in assembling the leaflet holder?
    Which flaps form the front of the stand?
    How to form the base?
INSTRUCTIONS FOR:
LEAFLET HOLDER
MODEL NO: BHA4.V3
● PlacecardwithSealeylogoface
 down.
● Foldaps‘A’ing.1forward,allowing
 feet‘B’toturnouttotherear.
● Flaps‘A’pushthroughtojoinfeet‘B’at
 therear,asing.2
● Foldap‘C’overtolaybetweenaps
 ‘A’,formingthefrontofthestand.Push
 backtolockthetabsintothesides.
● Referringtog.3,foldaps‘D’intoform
 thebase.
● Flaps‘E’foldinand‘F’isfoldedoverthem
 tosecurethestand.
g.1 g.1 g.2 g.2
BHA4.V3Issue:401/07/21
Original Language Version
©JackSealeyLimited
g.3 g.3
A A
C
D D
F
E
E
/