Air Conditioning offering total HVAC Solutions
confirm the new "Wave Tool Advance for SMMS-u and DX Coil Interface Advance series" has been
added to the VRF product range
1. Wave Tool
Wave Tool Advance (WTA) for SMMS-u is an App for smartphone installation and maintenance of compatible air
conditioning equipment. This App enables the checking of some aspects of the system and test functions of
compatible AC equipment
This App uses the NFC function of smartphones. Since the NFC function is only available on iPhone 7
or newer, this App cannot be used on older models
Android is a trademark of Google LLC
Apple and the Apple Logo are trademarks of Apple Inc., registered in the U.S. and other countries and regions
App Store is a service mark of Apple Inc
IOS is a trademark or registered trademark of Cisco in the U.S. and other countries
2. Features
Supports: SMMS-u
Can display TA/TF/DDC sensors (when the new DX Coil Interface Advance is connected to SMMS-u)
3. Functions
Main functions
iOS Version
Android OS version
Test Operation Function Setup function used during the test operation
Auto Saved Data Output
Read out the information automatically saved
in an outdoor unit
Save Data to Outdoor Unit
Enable other workers to read and share
Information anytime on site. Same functions are
available while an air conditioning unit is not
powered on
Capture
Acquire operation data at the time when you
touch your smartphone to an outdoor unit, or
you set a timer
Simple Report Use the functions installed in the smartphone to
create simple reports
Data Management Search and edit the data saved in your
smartphone
Help
Show help functions of the Wave Tool Advance
NFC system settings, NFC tag replacement
methods, and Abbreviations
New Wave Tool Advance
For detailed information on how to use WTA, please refer to
the user guide on our website from the QR code of the leaflet
about WTA included in the outdoor unit
https://www.toshiba-carrier.cojaglobal/appli/smms wave tool advance/index.htm
