Apple Powerbook 5300

iFixit Apple Powerbook 5300 User manual

  • Hello! I've reviewed the user guide for the Powerbook 5300 Battery Replacement. This document contains detailed information about how to install Powerbook 5300 battery, including steps for removing the old battery and disconnecting ribbon cables. I am ready to answer your questions about this guide and the process described.
  • Where is the battery removal latch located?
    How should I remove the battery?
    What should I do with the ribbon cables?
Apple Powerbook 5300 Battery Replacement
Installing/replacing a Powerbook 5300 battery.
Written By: Alex Wineteer
Apple Powerbook 5300 Battery Replacem
Draft: 2022-05-20Guide ID: 5568 -
This document was generated on 2022-05-25 01:10:41 PM (MST).
© iFixit — CC BY-NC-SA www.iFixit.com Page 1 of 3
INTRODUCTION
This guide will show you how to install a Powerbook 5300 battery.
Apple Powerbook 5300 Battery Replacem
Draft: 2022-05-20Guide ID: 5568 -
This document was generated on 2022-05-25 01:10:41 PM (MST).
© iFixit — CC BY-NC-SA www.iFixit.com Page 2 of 3
To reassemble your device, follow these instructions in reverse order.
Step 1 — Battery
Position the Powerbook towards you
with the monitor closed.
Press the battery removal latch
located on the right side of the front
panel.
Gently slide the battery out.
The keyboard, front pane, and hard
drive are connected to the laptop's
logic board via a ribbon cable. Lift up
slowly on each component with one
hand and disconnect the ribbons
from their ports on the logic board.
Apple Powerbook 5300 Battery Replacem
Draft: 2022-05-20Guide ID: 5568 -
This document was generated on 2022-05-25 01:10:41 PM (MST).
© iFixit — CC BY-NC-SA www.iFixit.com Page 3 of 3
/