1268 1269
Minature Conveyors
Minature Conveyors
Check out misumiusa.com for the most current pricing and lead time.
There’s more on the web: misumiusa.com
CVSY
60W/90W Motor Type
Guided Flat Belt Conveyor Heavy Duty –
Guided Belt to Prevent Lateral Movement,
Center Drive, 3-Groove Frame
(Pulley Dia. 30mm)
Guided Flat Belt Conveyor Heavy Duty
Guided Belt to Prevent Lateral Movement, Center Drive, 3-Groove Frame (Pulley Dia. 30mm)
Frame Motor Cover Pulley Holder
Material Aluminum Steel 1018
Carbon Steel
Surface
Treatment Clear Anodize Paint Paint
Features: Up to 90W, Medium distance (up to 6m) transfer suited conveyor. The belt with the guide prevents lateral movement,
and the center drive is suitable for "Conveyor to Conveyor" transfer.
Gearhead
Reduction Ratio
Belt Speed (m/min)
50Hz 60Hz
547.1 56.5
7.5 31.4 37.7
926.2 31.4
12.5 18.8 22.6
15 15.7 18.8
18 13.1 15.7
25 9.4 11.3
30 7.9 9.4
36 6.5 7.9
50 4.7 5.7
60 3.9 4.7
75 3.1 3.8
90 2.6 3.1
100 2.4 2.8
120 2.0 2.4
150 1.6 1.9
180 1.3 1.6
Output
(W)
Motor Reduction
Ratio A1
Specification Manufacturer
60W
Constant
Speed Motor
Panasonic 5–180 180.0
Oriental 5–180 185.0
Taiwanese
5–75 182.6
90–180 191.6
Variable
Speed Motor
Oriental 5–180 215.0
Taiwanese
5–75 194.6
90–180 203.6
90W
Constant
Speed Motor
Panasonic 5–180 195.0
Oriental 5–180 200.0
Taiwanese
5–75 197.6
90–180 206.6
Variable
Speed Motor
Oriental 5–180 230.0
Taiwanese
5–75 209.6
90–180 218.6
0
5
10
15
20
25
30
35
40
45
50
55
0 10 20 30 40 50 60
70
Belt Speed (m/min)
Transfer Mass (kg/Unit)
60W / B=500
90W / B=500
Compatible with JIS standard hex nuts.
Detail A
(for M5)
5.2
8.2 +0.5
0
2.5 1.55
13
42
59
25
8.2
20
2.5 1.5
7.5
13.2
10
6-R0.5
8
3-Ø5
30
Carrying Surface Side
13
Detail A
Detail A
(for M5)
5.2
8.2 +0.5
0
2.5 1.55
13
42
59
25
8.2
20
2.5 1.5
7.5
13.2
10
6-R0.5
8
3-Ø5
30
Carrying Surface Side
13
Detail A
75 20
40
Direction of Conveyance
FYA (Additional Counterbore for Nuts)
L+31.6
L: Distance between Pulleys
L/2
L/4
112.5
189
14.5
15.8
Ø30
30
15
25
Ø30
B: Belt Width
B+10
(Frame Width)
B+50
89.5
20 20
L/4
81
280
62
Ø45.8
18
77
Ø45.8
Ø50
Ø30
Ø30
A*
B+54
Belt Support Roller *1
33
6
B+56.4
Belt Support Roller *1
15.8
15
25
40
Ø30
Ø30
89.5
7520
Ø28.6
Belt Support Roller *1
Counterbore for Nuts *2
1.3 (Belt Upper Surface)
59
61.6
2-M5
2-M5
Additional counterbored holes are machined on identical locations on both frames.
M8 Tensioning Nut
Ø28.6
Belt Support Roller *1
50
45
M8 Tensioning Nut
M5 Screw for Tension
4848
90
*1 When L≥4005, belt support rollers are mounted in the diagram locations.
The layout is as shown in the diagram at the time of shipping but the drive section
and belt support rollers can be moved.
*2 When L≤525, there will be no counterbored hole for nuts.
However, each slot has 4 pre-inserted nuts provided.
The dimensions in the diagram are for Belt Specifications H (0.8mm thick.).
Take note that belt thickness varies by Belt Specifications.
*Reference Value may different by selected Belt.
CE
Compliant
Frame Cross Section and Enlarged View
(Symmetrical)
Gearhead Reduction Ratio
* May decrease depending on load condition.
Conveying CapacityMotor Specifications
112.5
15.8
Top Surface of Belt
43.7A
75 20
40
Direction of Conveyance
FYA (Additional Counterbore for Nuts)
L+31.6
L: Distance between Pulleys
L/2
L/4
112.5
189
14.5
15.8
Ø30
30
15
25
Ø30
B: Belt Width
B+10
(Frame Width)
B+50
89.5
20 20
L/4
81
280
62
Ø45.8
18
77
Ø45.8
Ø50
Ø30
Ø30
A*
B+54
Belt Support Roller *1
33
6
B+56.4
Belt Support Roller *1
15.8
15
25
40
Ø30
Ø30
89.5
7520
Ø28.6
Belt Support Roller *1
Counterbore for Nuts *2
1.3 (Belt Upper Surface)
59
61.6
2-M5
2-M5
Additional counterbored holes are machined on identical locations on both frames.
M8 Tensioning Nut
Ø28.6
Belt Support Roller *1
50
45
M8 Tensioning Nut
M5 Screw for Tension
4848
90
75 20
40
Direction of Conveyance
FYA (Additional Counterbore for Nuts)
L+31.6
L: Distance between Pulleys
L/2
L/4
112.5
189
14.5
15.8
Ø30
30
15
25
Ø30
B: Belt Width
B+10
(Frame Width)
B+50
89.5
20 20
L/4
81
280
62
Ø45.8
18
77
Ø45.8
Ø50
Ø30
Ø30
A*
B+54
Belt Support Roller *1
33
6
B+56.4
Belt Support Roller *1
15.8
15
25
40
Ø30
Ø30
89.5
7520
Ø28.6
Belt Support Roller *1
Counterbore for Nuts *2
1.3 (Belt Upper Surface)
59
61.6
2-M5
2-M5
Additional counterbored holes are machined on identical locations on both frames.
M8 Tensioning Nut
Ø28.6
Belt Support Roller *1
50
45
M8 Tensioning Nut
M5 Screw for Tension
4848
90
Part Number - B - L -
Motor
-Belt
Specification -
Motor
Manufacturer
Selection
-FYA
Output - Voltage - Specification - Gearhead Reduction Ratio
CVSY -300 -2000 -90 -T100 -IM -25 -H-C-FYA1000
Specify Drive Section Position
Brackets for Speed Controller Included
Post-Assembly Insertion Nuts Included
Motors with Electromagnetic Brake
Stands (Legs)
Part
Number B
Available Types
L480–
600
L605–
800
L805–
1000
L1005–
1200
L1205–
1400
L1405–
1600
L1605–
1800
L1805–
2000
L2005–
2200
L2205–
2400
L2405–
2600
L2605–
2800
L2805–
3000
L3005–
3250
L3255–
3500
L3505–
3750
L3755–
4000
L4005–
4250
L4255–
4500
L4505–
5000
L5005–
5500
L5505–
6000
CVSY
100 ••••••••••••••••••••••
200 ••••••••••••••••••••••
300 —•••••••••••••••••••••
400 ——••••••••••••••••••••
500 ———•••••••••••••••••••
Connect the motor so that the belt rotates in the direction of conveyance.
Workpiece weighing over 10kg/unit might deform belt base plate.
When "No motor, gearhead" is selected, the motor mounting hole pitch will vary depending on the motor's power rating. Please see Technical Information in our Conveyor Selection web site for the dimension details.
When "No motor, gearhead" is selected, this unit will be delivered unassembled. The customer is to assemble the unit according to the included assembly instructions. See our Conveyor Selection site for assembly
procedures and packaging details.
Note that warpage might occur on the guided belts depending on the number of plies (thickness).
When the unit length (L dim.) is 2000mm or less, this will be delivered complete. For a unit over 2000mm, the frame is delivered in sections and the customer is to assemble according to the included assembly
instructions. The assembly procedure manual can also be downloaded from our Conveyor Selection web site.
Part
Number Width B (mm) Length L
5mm Increment
Motor
Belt Specification
FYA
(Additional Counterbores)
5mm Increment
Motor Manufacturer Selection
The prices vary by
manufacturer.
Output
(W) Voltage (V) Specification Gearhead Reduction Ratio
CVSY
100
200
300
400
500
480–6000 60
90
(Single-Phase)
TA100
TA110
TA115
TA200
TA220
TA230
IM
(Constant Speed
Motor)
SCM
(Variable Speed
Motor)
5
18
60
150
7.5
25
75
180
9
30
90
12.5
36
100
15
50
120
H (General Purpose,
Green)
W (General Purpose,
White)
G (For Sliding, Green)
S (For Sliding, White)
D (Static Conductive)
O (Oil Resistant)
N (Non-Stick Food Grade)
J (No Belt)
* For belts other than the
above, select from Belt
Specification below.
105<FYA<L-105
* When not specified,
there will be no additional
counterbores.
A (Panasonic Motor)
B (Oriental Motor)
C (Taiwanese Motor)
*SCM (Variable Speed Motor) is
not selectable for A.
(Three-Phase)
SA200
SA220
SA230
IM (Constant Speed
Motor)
NV (No Motor) NM (No Motor) NH (No Gearhead) R (No Motor, Gearhead)
Belt Specification Standard Belt Optional Belt 1 Optional Belt 2 No Belt
General Purpose H (Green), W (White) — —
J
(No Belt)
For Sliding G (Green), S (White) — —
For Inclined Transfer — — —
Grip Type — — GG (Green), GW (White)
Oil Resistant O (Green) OW (White) —
Non-Stick Food Grade N (White) NB (Sky Blue), NBG (Lime Green)
HH (Green), HW (White) —
Food Grade — KW (White), KSB (Sky Blue), PHB (Sky Blue) —
Static Conductive D (Black) — —
If using Optional Belts, please select motor manufacturer A or B (Motor C is applicable for Standard Belt only.)
Guided Flat Belt Conveyor Heavy Duty Guided Belt to Prevent
Lateral Movement, Center Drive, 3-Groove Frame (Pulley Dia. 30mm), continued
Conveyor Resource Site:
http://www.misumiusa.com/conveyor/
Conveyor Selection, Design Your Own Conveyor
Kit, & Maintenance Parts Search
For details of alterations, see P.1276.
-
1
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
Other documents
-
Oriental motor GFV6G100 Operating instructions
-
Panasonic TA-220-TUND-MI User manual
-
Chief TA200 Installation guide
-
-
Oriental motor SCM540EC-30 / DSCD40EC Operating instructions
-
Oriental motor SCM540ECM-15 / DSCD40ECM Operating instructions
-
Oriental motor BXM460-10 / BXSD60-C2 User manual
-
Conair UGR004/1200 User manual
-
Parker HMRB18 Assembly And Operating Instructions Manual
-
Oriental motor BLHM230KCM-10 / BLH2D30-KD User manual