ORACLE LIGHTNING 5872-333 Installation guide

ORACLE LIGHTING



BLACK  TO BLACK

RED + TO YELLOW

WIRE WITH BLUE STRIPE

REMOVE HARDTOP FOR INSTALLATION.

CLEAN SURFACE WITH ALCOHOL SWAB. REMOVE 3M PAPER BACKING. ALIGN STARLINER

PANEL. FIRMLY PLACE ONTO SURFACE.

TTAP STARLINER WIRING ADAPTERS TO

DOME LIGHT WIRING HARNESS.

INSTALL THE MOUNTING HARDWARE.

REPEAT STEPS FOR OTHER STARLINER PANEL.

USE A PANEL TOOL TO RELEASE CENTER DOME LIGHT.

LOOSEN 3 T20 SCREWS TO REMOVE CROSS PANEL.

TO PREVENT WIRES FROM SAGGING, RUN THEM

THROUGH THESE OUTLETS. REINSTALL PANEL, DOME LIGHT, AND HARDTOP.

PLUG IN POWER CABLES TO STARLINER PANELS.

DISCLAIMER:

DO NOT PLUG IN WITH EXCESS FORCE.

IT MAY PUSH THE POWER SOURCE INTO THE PANEL

Download PDF