2. Cusco
  3. 1A9-820-F
1A9-820-F

Cusco 1A9-820-F User manual

  • Hello! I've reviewed the CUSCO Installation Manual for the Front Lip Spoiler. This document outlines the installation process for the 2019+ Toyota Corolla Hatchback using the unpainted spoiler and re-using original screws. It also mentions painting and the use of caulking. I'm ready to assist you with any questions you might have about this installation.
  • What is included in the kit?
    What vehicle is this spoiler designed for?
    What screws are used for installation?
    Is painting required after installation?
08102021-01
[Part No.] 1A9-820-F
[Vehicle] 2019+ Toyota Corolla Hatchback
[Kit Includes]
[Installation]
1. Temporally Install CUSCO Front Lip Spoiler by re-using OE screws (x10)
to check all holes are lined-up.
3. Paint the part
Caution: If used high-temp paint baking process, the Wing might be deformed.
Installation Manual
Unpainted Front Lip Spoler x1
(No Hardware included - Re-use OE Parts)
4. Final Installation
Use Caulking material (not included in this kit) for competiotion use.
/