Cusco 1A9-820-SS User manual

[Part No.] 1A9-820-SS

[Vehicle] 2019+ Toyota Corolla Hatchback

[Kit Includes]

[Installation]

2. Temporally Install CUSCO Side Skirt by using supplied hardware to check

all holes are lined-up.

3. Paint the part

Caution: If used high-temp paint baking process, the Wing might be deformed.

4. Final Installation

Installation Manual

Unpainted Side Skirt Set x1

M6 x 20mm Bolt x 10, M6 Nut x10, M6 Washer x10

1. Remove OE Side Steps out from the vehicle. Temporally Install CUSCO Side Skirt on

the OE Side Step and align the position properly. Then drill holes on OE Side Step

by (x10)

Install CUSCO Side Skirts by using supplied hardware. Use Caulking material (not

included in this kit) for competiotion use if needed.

OEM Part

CUSCO Side Skirt

Drill Holes (x5)