ZERO ZERO ROBOTICS V202107 User guide

Brand: ZERO ZERO ROBOTICS

Model: V202107

Category: Rechargeable batteries

Type: User guide

ZERO ZERO ROBOTICS V202107 combines the latest drone technology with a user-friendly interface to bring you an unparalleled flying experience. With its intelligent battery management system, you can enjoy extended flight times and easy charging. The drone's advanced camera system, featuring a 3-axis gimbal and adjustable shooting parameters, allows you to capture stunning aerial photos and videos. Unlock various flight modes, including auto takeoff/landing and obstacle avoidance, for a safe and effortless flight. Its compact design and detachable control sticks make it easy to carry and store.

Quick Guide

快速入门指南

V202107

ZV101

zerozero.tech

智能电池电量键

电池电量指示灯

电池卡扣

底部红外传感器

底部视觉传感器

状态指示灯

Status Indicator Light Battery Buckle

Battery Power Button

Battery Level Indicator Light

Intelligent Battery

Bottom Optical Sensor

Bottom Infrared Sensor

电源键

Power Button

Arm Indicator Light

Forward Vision System

Gimbal and Camera

Propeller

Motor

前视视觉传感器

三轴云台相机

Arm Button

机臂按键

Arm Button

机臂按键

螺旋桨

电机

机臂指示灯

Detachable Control Stick

可拆卸摇杆

Mobile Phone Stand

手机支架

Clamp for Small Phones

小尺寸手机卡扣

Return to Home Button

自动返航按键

Emergency Stop Button

急停按键

Status Indicator Light

状态指示灯

Battery Level Indicator Light

电量指示灯

Leisure/Sport Toggle Button

智能/运动档切换键

Shutter Button

拍照按键

Gimbal Wheel

云台俯仰控制滚轮

Antenna

天线

Link Button

Micro SD Card Slot

对频键

Heat Vents

散热口

Micro SD 卡槽

Arm Button

机臂按键

* For more information, please download the User Manual from the ofﬁcial website.

This guide is subject to change without prior notice. Please visit the ofﬁcial website for more detailed information.

* According to changes in market demand or production plan, Hangzhou Zero Zero Technology Co., Ltd. may change

the product speciﬁcations and appearance. Please contact us if you have any questions.

* 了解更多信息，请前往官网下载《用户手册》。

本指南如有更新，恕不另行通知。请登录官网获取最新信息。

* 根据市场需求的变化或生产计划的调整，杭州零零科技有限公司可能对产品规格、外观进行更改，如您有疑问请联系我们。

Video Transmission Port (Type-A)

图传接口(Type-A)

USB-C Port

充电接口（USB-C）

Record Button

录像按键

Camera Settings Adjustment Dial

拍摄参数调节滚轮

Custom Button

自定义按键

Power Button

电源按键

Custom Button

自定义按键

Control Sticks Storage Slot

摇杆收纳槽

Step 1 Download V-Coptr App

Use mobile phone to scan the QR code below or

download the V-Coptr App from the App Store /

Google Play Store

The V-Coptr App is compatible with iOS 10.0 (or above) or Android 6.0 (or above).

Step 2 Charging

Charge the Intelligent Battery

1. Push back the battery buckles to remove the battery.

2. During charging, the indicator lights of current battery

level ﬂash regularly.

Charge the BlastOff Controller

Remove the Intelligent Battery

Charge to activate the battery

Press the power button of Intelligent Battery / BlastOff

Controller brieﬂy, and the battery level indicator light

will show the current battery level.

Check the battery level

Plug the charging cable into the USB-C Port.

It takes about 2.5 hours to fully charge.

Prepare the BlastOff ControllerStep 3

Unfold the Mobile Phone Stand and the Antennas

iOS / Android

Insert the intelligent battery into the slot and

push forward the battery buckles

Prepare the DroneStep 4

Make sure the red labels under the battery buckles are not visible to ensure the

battery is securely installed

Remove the gimbal protector and pull out the

propellers from the battery buckles

Use the cable of your mobile phone (not included

in the package) to connect the BlastOff Controller

and your mobile phone

Press and hold the power button for 2 seconds. The

BlastOff Controller will beep when it is successfully

turned on

Install the Control Sticks

Place your mobile phone on the Mobile Phone Stand

Use the clamps to secure smaller phones

Press and hold the arm buttons until the arms

are completely unfolded

After releasing the arm buttons, the buttons are fully popped up, indicating that

the arms are fully unfolded

Press and hold the power button for 5 seconds

until the status indicator light blinks. Once it's

ﬁnished booting up, you will hear a sound

Connect the DroneStep 5

Open the V-Coptr App

* During the connection process, please keep the BlastOff Controller and

the drone within 1 meter of each other.

* Note : There is no need to manually rotate the motors. The motor angle will

automatically be in place before takeoff.

Method Two: Connect the BlastOff Controller and

the drone with the combination keys

1. Press and hold the two custom buttons + record button for

two seconds, the status indicator light of the BlastOff

Controller will ﬂash green as it starts to connect to the drone.

2. The connection is successful when the status indicator light

of the BlastOff Controller is solid green.

Start Connecting

Method One: Connect BlastOff Controller and the drone

via App

Press the link button on the drone. The status

indicator light of the drone will ﬂash green and

begin the linking process

Take off

1. Auto takeoff in the App.

Step 7 Flight

Tap the “takeoff ” button to initiate takeoff

2. Manual takeoff with the BlastOff Controller.

Start the propellers

Method 1 Method 2

Left stick up to take off

Landing

1. Auto landing in the App.

Tap the “landing” button to land the drone

Land

Step 6 Calibrate the Sensors

Before taking off the drone, it is recommended to

calibrate the IMU and compass in the "General

Settings" in the App's camera view page

2. You can use the “gimbal wheel” to control the tilt angle

of the camera.

5. Leisure/Sport Toggle Button

Switch to “Leisure”(L): you can use the manual, and

intelligent modes in the App, and the obstacle avoidance

feature is available.

Switch to “Sport”(S): the ﬂight speed will be greatly

increased. Only the manual mode in the App can be used,

and the obstacle avoidance feature is unavailable.

4. Short press the “shutter button" to take a photo; short

press the “record button" to start/stop video recording.

BlastOff Controller Operations

1. The default control mode is shown below. You can

choose other control modes in the App.

Down Turn

Left Turn

Right

Forward

Left Right

Backward

Left Stick Right Stick

Left stick down until the drone touch the ground and the motors stop

2. Manual landing with the BlastOff Controller.

Gimbal Control

3. You can use the “camera settings adjustment dial” to

control the ISO/Shutter/EV value (short press the button

to switch the control value).

Change the ISO/Shutter/EV value

Switch the control value

Shutter Button Record Button

Return to Home

You can short press the “return to home button” in the

App/of the BlastOff Controller to bring the drone back to

the home point.

Emergency Stop

You can short press the “emergency stop button” in the

App/of the BlastOff Controller to break and hover the

drone in emergency situations.

6. You can set the features of the custom buttons in the

App.

Please check the Disclaimer and Safety Instructions for more details

at zerozero.tech/support/downloads.

Please read it carefully before ﬂying.

Attention:

Near strong magnetic ﬁelds

No-ﬂy zones

Near crowds or dense buildings

In rain, fog, snow, lightning, hail,

storms, strong wind, or any other

extreme weather environments.

Improper Flying Environments:

Flight Safety

Replace aging, broken or deformed

propellers. We recommend installing the

landing gear and taking off on ﬂat

ground.

Please make sure the bottom

infrared sensor is clean before

taking off.

Do not release or retrieve the

drone with your hands.

Wrap the landing gear over the both sides of the battery footpads

Remove the Landing Gear

( Attention: Remove the intelligent battery from the drone ﬁrst. )

Hold one side of the landing gear and push in the direction shown

to remove it from the battery footpad

Remove the landing gear on the opposite side in the same way

Install the Landing Gear

( Attention: Remove the intelligent battery from the drone ﬁrst. )

iOS / Android

第一步下载 V-Coptr App

* 请使用 iOS 10.0 及以上版本或 Android 6.0 及以上版本。

使用手机扫描下方二维码或在软件商店下载安装

V-Coptr App

第二步充电

给智能电池充电

首次使用智能电池，需要充电激活。

向后推电池卡扣，取下智能电池

充电中，指示当前电量的指示灯会一起规律闪烁

第三步准备航拍遥控器

展开手机支架和天线

接入 USB-C 充电线完全充满大约需要 2.5 小时

给遥控器充电

查看电量

短按智能电池电量键 / 遥控器电源键，可查看当前电量。

取出收纳槽中的摇杆并安装

使用手机数据线（自备）连接

长按电源键 2 秒，听到开机声后，遥控器开机成功

固定手机

可打开支架上的卡扣来夹持小尺寸手机

电池卡扣无红色露出代表电池已正确安装

第四步准备飞行器

将智能电池插进卡槽，并向前推电池卡扣

摘下云台保护罩，从电池卡扣中抽出桨叶

松开按键后，机臂按键完全弹起代表机臂已展开到位

按住机臂按键，直至完全展开机臂

长按电源键 5 秒至状态指示灯开始闪烁，等待开机

声响起，开机成功

打开 V-Coptr App

第五步连接飞行器

短按飞行器对频键，飞行器状态指示灯绿灯闪烁并开始

对频

方法一：通过 App 连接航拍遥控器和飞行器

* 连接过程中，请保持航拍遥控器与飞行器相距 1 米以内。

* 注意：不需要手动旋转电机，起飞前电机角度将自动就位。

方法二：通过组合键连接航拍遥控器和飞行器

1. 长按组合键（两个自定义按键+录像按键）两秒，遥控器状态指

示灯绿灯闪烁，开始连接飞行器。

2.连接成功，遥控器状态指示灯绿灯常亮。

方式 1 方式 2

飞行操控第七步

起飞

1. 使用 App 一键起飞。

2. 使用航拍遥控器手动起飞。

点击拍摄界面的“起飞”图标，飞机将自动起飞

螺旋桨加速向上推油门杆起飞

降落

1. 使用 App 一键降落。

点击拍摄界面的“降落”图标，飞机将自动降落

校准传感器第六步

起飞飞机前，建议在 App 预览流页内的“通用设置”

中校准 IMU 和指南针

左摇杆右摇杆

前进

后退左右

上升

下降左转右转

航拍遥控器操作

1. 遥控器默认操控方式为“美国手”，您可以在 App 中选择

其他操控方式。

2. 使用“航拍遥控器”手动降落。

持续向下打油门杆，直至飞行器落地且电机停止

3. “拍摄参数调节滚轮”，可滚动调节 ISO/快门/EV 值

（短按按键进行控制切换）。

2. “云台俯仰控制滚轮”，可控制相机的俯仰拍摄角度。

云台控制

4. 单击“拍照按键”，拍摄一张照片；单击“录像按键”，开始/

停止录像。

5. 智能/运动档切换键

切换至“智能档”(L)：可使用 App 上的手动和智能模式，以

及避障功能。

切换至“运动档”(S)：飞行速度将大幅提升，仅可使用 App

上的手动模式，且无避障功能。

滚动调节 ISO/快门/EV 值

短按按键进行控制切换

拍照按键录像按键

自动返航

短按 App / 航拍遥控器上的“自动返航按键”，飞机自动返航。

急停

飞行过程中遇到需要紧急刹车的情况，请短按 App / 航拍遥控器

上的 “急停按键”使飞行器刹车并悬停。

6. 可在 App 中设置“自定义按键”的功能。

更多安全事项请参考

zerozero.tech/support/downloads 上的免责声明和安全

操作手册，飞行前请务必仔细阅读。

请勿手持放飞或收回飞机。起飞前，请确保底部红外传感器

清洁无脏污。

注意事项：

强磁场环境

禁止飞行的区域或建筑物周围

人群、建筑密集的区域

雨雪、雾霾、雷电、大风、冰雹、

沙尘等恶劣天气环境

不适用飞行环境：

飞行安全

及时更换老化、

破损或变形的螺旋桨。

建议安装脚架

并选择平地降落飞机。

拆卸脚架（注意：需要先将电池从飞机上取下）

握住脚架一侧往图示方向推，使其脱离电池脚垫

另一侧操作同上，摘下脚架

*脚架安装与拆卸

安装脚架（注意：需要先将电池从飞机上取下）

向内推脚架，确保脚架卡紧固定

1将脚架卡住两侧电池脚垫

ZERO ZERO ROBOTICS V202107 User guide

Brand: ZERO ZERO ROBOTICS

Model: V202107

Category: Rechargeable batteries

Type: User guide

Download PDF

report

in other languages

日本語: ZERO ZERO ROBOTICS V202107 ユーザーガイド

ZERO ZERO ROBOTICS V202107 User guide

ZERO ZERO ROBOTICS V202107 User guide

in other languages

Other documents