S-BOL S-BOL TF-A03 Silent 32 Inch Tower Fan User manual

Brand: S-BOL

Model: S-BOL TF-A03 Silent 32 Inch Tower Fan

Type: User manual

This manual is also suitable for

TF-A03 Silent 32 Inch Tower Fan

S-BOL S-BOL TF-A03 Silent 32 Inch Tower Fan is a versatile device designed to keep you cool and comfortable in your home. With its powerful airflow and a variety of features, it's an ideal choice for any room. It features three-speed settings to adjust the airflow intensity, an oscillation function for wider air distribution, a sleep mode for quiet operation at night, and a timer function for automatic shutoff. The remote control allows you to operate the fan from a distance, adding convenience and ease of use.

32” Tower fan with remote control

INSTRUCTION MANUAL

Please READ and RETAIN for future reference.

PARTS NAME

1. Remote Control 2. LED Display

3.Rear cover 4. Air outlet grille

5. Base 6. Switch panel

Remote control

MODE function/POWER/TIMER/Oscillation/SPEED

SAFETY ADVICE

Before using this product, please read the instructions carefully

and follow the safety operating rules.

Please keep the warranty certificate and sales receipt. If possible,

please put the package and instructions in a safe place for future

reference.

This product is not suitable for children under 8 years old and

those with weak physical, sensory and intellectual abilities or

lack of experience and knowledge. Unless they have been

supervised or instructed about the safe application of the

product and its risks.

Children should not play with this product. The product shall not

be cleaned and maintained unless the child reaches the age of

August and receives supervision.

Do not allow children under 8 years of age or irresponsible

people to leave their products and power lines unattended,

especially when the product is still on the wall or cooling down.

Check that your power supply is consistent with the display on

the device. Do not leave equipment unattended during use

Always check whether the equipment is damaged. If there is any

sign of damage to the wire or product, do not use it. In this case,

it should be repaired by qualified electricians. If the wire is

damaged, it must be replaced by qualified electricians to avoid

danger. This equipment can only be used in the manner

indicated in this instruction.

Do not immerse the equipment in water or any other liquid, and

avoid splashing on the equipment. Do not use this equipment

near high temperature. Do not hang the power cord on the edge

of the sharp edge of the table or touch the surface of the high

temperature.

Do not use equipment with extension lines.

When the equipment is not used, cleaned or replaced, please

turn off the equipment and remove the power plug from the

power supply.

Do not use the appliance outdoors and place it in a dry

environment.

Do not use accessories that are not recommended by the

manufacturer. They may pose a risk to users and damage

electrical appliances.

Never pull or move electrical appliances to ensure that the wires

are not entangled in any way. Don't wind the wire around the

appliance or bend it.

Before installing the base or any other parts or dismantling, be

sure to unplug the power cord. Make sure the assembly is

correct before inserting the equipment. Never attempt to start

the device without a protective shield. Before unplugging the

power supply, make sure that the electrical appliance is switched

to the "0" position.

Do not insert fingers, pencils, or anything else into the fence.

Do not touch equipment with wet or wet hands

Always put the equipment on a stable plane. In the process of

using, it is also necessary to ensure that the surface can bear the

weight of the device. Adequate space should be provided for air

circulation. (At least 20 cm)

During use, the equipment should not touch curtains, clothing,

towels or other flammable materials.

Do not use this equipment where curtains may be drawn. If the

equipment is used in an inappropriate manner, it may pose a

danger to the user, in which case the producer is not liable for

any possible damage.

Do not allow equipment to be used for a long time while you are

away. You must turn it off before you leave.

Do not point the device at the patient or the sleeping person.

When cleaning equipment, do not disassemble protective

devices and check "clean area".

Before installing the equipment, make sure it is pulled out. Place

the rear base on the bracket.

Push the power cord through the center of the base and insert it

into the wire box.

Clamp the base tightly and adjust the position of the bracket.

Then tighten the nut and place the equipment on a dry, hard

and horizontal plane.

Remote control

To start the remote control, use the CE2025 battery. Open the

battery compartment cover and insert and cover with +/-

correspondingly.

You can operate the fan through panel control or remote control

at a distance of 10 meters. The following shows which switches

perform which speed and wind functions.

Before any cleaning operation is performed, please disconnect

the power supply line between the equipment and the power

supply.

To remove the dirt from the plastic surface, use a soft wet cloth.

Do not use gasoline, diluent or benzene to clean the equipment.

Use a vacuum cleaner to remove dust from the protective shield

without removing them.

Do not immerse the equipment in water or other liquids.

In off-season storage, it is important to keep the equipment in a

safe and dry place. It is important to protect equipment from

dust. We strongly recommend the use of initial packaging to

store equipment.

In order to protect the environment and protect human health,

waste electrical and electronic equipment should be treated

according to the following specific rules.

Taking into account the impact of the user, as indicated on the

label or package symbol, your equipment should not be treated

as an unclassified urban waste. Users should take it to the

municipal collection point for waste collection according to the

instructions, by recycling, recycling or using other wastes.

FUNCTIONS AND USE

DESCRIPTION OF INSTALLATION STEPS

STEP 1: Unscrew the bottom mounting nut.

STEP 2:The two bases are parallel to each other and the four holes are

stuck in the middle of the power cord and inserted into the

bottom of the product.

STEP 3: Align the two protruding dots at the bottom and put them in

STEP 4:Tighten the bottom mounting nut

STEP 5: Screw the four screws properly to prevent shaking

STEP 6:Put the power cord card slot and install it.

STEP1 STEP 2

STEP3 STEP 4

STEP 5 STEP 6

USING THE TOWER FAN

1. Place the fan on a stable surface and ensure that the grilles for

the supply and removal of the air are unobstructed.

2. Connect the power plug to a suitable outlet.

3. POWER: turn ON the FAN by pressing the “POWER ” button; the

product start to work with a low speed (green led turn on). Turn

OFF the FAN by pressing the “ OFF” button.

4. Select the desired speed pressing the “SPEED” button until the

desired speed LED is lit.

5. Press the “ TIMER” button to set timer from 0.5 hour to 7.5

hours (step 0.5 hour).

6. Pressing the “MODE” button will select either

Normal/Nature/Sleep.

7. Press “ OSC” button to start and stop the oscillation function.

Led light will turn on/off in the control panel.

TECHNICAL DATA

Product: Tower Fan

Model: TF-A03

RATED VOLTAGE: 220-240V

RADTED FREQUENCY: 50Hz

“Implementation of Directive 2012/19/EU on Waste

Electrical and Electronic Equipment (WEEE)”,

pertaining to reduced use of hazardous substances in

electrical and electronic equipment, as well as to waste

disposal”. The symbol of the crossed-out wheelie bin

on the equipment or on its packaging indicates that

the product must be disposed of separately from other

waste at the end of its service life. The user must

therefore take the dismissed equipment to suitable

separate collection centres for electrical and electronic

waste, or return it to the dealer in case they purchase

a new device of equivalent type, at a one-to-one-ratio.

Suitable segregated collection of the equipment for

subsequent recycling, treatment or

environmentally-friendly disposal helps prevent

damage to the environment and to human health, and

encourages the re-use and/or recycling of the

materials that make up the equipment. Abusive

disposal of the product by the user shall result in the

application of administrative fines in accordance with

the laws in force.

S-BOL S-BOL TF-A03 Silent 32 Inch Tower Fan User manual

Brand: S-BOL

Model: S-BOL TF-A03 Silent 32 Inch Tower Fan

Type: User manual

This manual is also suitable for

TF-A03 Silent 32 Inch Tower Fan

Download PDF

report

S-BOL S-BOL TF-A03 Silent 32 Inch Tower Fan User manual

This manual is also suitable for

S-BOL S-BOL TF-A03 Silent 32 Inch Tower Fan User manual

Other documents