Comfier CO-201 User manual

Brand: Comfier

Model: CO-201

Type: User manual

NOTES：

Attention

Step 1 Step 2

FEATURES

The angle lock button cannot

be pressed in the working state.

Hold the fan head by hand and press the button to unlock, when the

telescopic rod is contracted in place, folding the fan accordingly.

Pull up the fan

in the folding state

❶

❻

Remove post-net with a "cross"

screwdriver Hold the front frame

of the fan by hand, turn it

counterclockwise to the left.

❼

The front mesh groove and the

rear mesh groove are aligned

at a distance of about 10mm,

and the front mesh is installed.

The front net and Fan blade can

be removed for cleaning and The

body can be wiped with damp rag

No washing

Turn the nut clockwise after

removing the front net

❽

❾❿

The arrow indicates

the DC charging

connector

⓬

Hold down the front grille frame of

the fan by hand, turn the groove of

the front grille clockwise to the right

and align it with the rear grille and

lock it, and then use the screws on

the top of the back grille to reinstall it.

⓫

❷ ❸

Turn the fan up in the

direction indicated by

the arrow

❹Fan head can be adjusted to

up and down 180°

When the fan

is set vertically,

the telescopic

rod is automatically

locked

Setting time

display

Setting time

off display

Display the

current wind

speed gear or

the set timing

shutdown time

Natural wind

indicator

180

10mm

DC charging

Connector

Alignment

1. Switch on/off

Press switch on/off button to turn on the fan. The fan starts at the default gear

which shutdown before. Press again to turn off the fan.

2. Adjust wind speed

After turn on the fan, press button “+,-” in the base or in the remote control to

adjust the wind speed. The speed range is from 1 to 8. 8 is the highest speed.

3. Natural wind

Press the natural wind button to change to natural wind mode. The indicate light

is up. Press again to return to original gear and the indicate light is off.

4. Oscillation

After turn on the fan, press button “Oscillate” in the base or in the remote

control to turn on the oscillation function. The fan rotates at an angle of about 60

degrees. Press again to stop the oscillation.

5. Timing

When the fan is running, press the timing button in the base or remote control,

the fan timing can be in the range of 1 to 8 hours. It will shut down automatically

according to the set time. When the shutdown time is set, the timer shutdown

indicator lights will be up. The fan enters the scheduled shutdown state.

Press the "+" and "-" buttons to set the timing time. Each press changes 1 hour.

When adjusting to 8h, if you press the timer button again, then the timer function

will be off, and the indicator light and icon h are off at the same time.

Children, elderly or patients who have lost the ability to take care of

themselves should use this product under adult supervision to prevent

accidents.

This product wind is strong, so suggest not to blow directly to babies and the

elderly for a long time.

When the power cord or product is found to be damaged or unsafe, please

suspend use, and contact the factory or its after-sales service agents, or

qualified personnel to replace. Do not repair and check by yourself.

This product should be placed out of reach of children, and the children

should be taught correctly. Do not use this product as a toy.

In order to avoid electric shock, no part should be in contact with water.

There can be no objects blocking the air inlet/outlet.

Please use this product in an environment of 0~40℃. Don't put the fan in

the bathroom, humid or very high temperature place, so as not to damage

the product.

Please keep the fan away from soft objects such as curtains and door

curtains to avoid getting caught in the fan.

Please unplug the power plug before cleaning or moving the product.

1. When cleaning, maintaining or moving the product, you must first turn off the

product and then unplug the power cord.

2. The fan must be completely stopped before it can be cleaned to avoid injury.

3. Do not immerse the power cord or main unit in water for cleaning or wash it

under a faucet. The internal parts of the fan must not be wetted.

4. Do not use detergent, wire brush, gasoline, alcohol, vinegar or other volatile

corrosive liquids to clean the product to avoid damage to the product.

5. Clean the surface of the fan with a slightly damp cloth.

6. After cleaning, the product must be completely dry before it can be connected

to the power supply.

7. If you will not use it for a long time, please store the product back in the box

and store it in a dry, cool and safe place.

8. The humidifier needs to take the absorbent cotton out of the product, and

gently squeeze the water out, then place the absorbent cotton in a dry and

ventilated place, let it dry naturally and store or use it again; clean the atomized

sheet part with a soft brush.

9. When cleaning the outer surface of the humidifier, dilute it with a neutral mild

detergent, and then wipe it with a cloth dampened with it.

FAULT

DESCRIPTION

CAUSE

ANALYSIS

TREATMENT

MEASURES

The adapter is not

plugged in. Plug in the adapter

power cord plug.

Machine

can't work

No power supply. Replace power supply.

The switch button is

not pressed. Press the switch

button again.

TROUBLESHOOTING

Wind leaf cracking. Replace the fan blades.

Abnormal

sound

Motor damage. Replace the motor.

When the fan is not used for a long time, please unplug the power plug to

prevent the product from shortening the product life and causing accidents

or dangers in the standby state for a long time.

Do not put fingers, other body parts or debris into the air inlet/outlet to avoid

injury and damage to the product.

Do not put wet towels or wet wipes on the product to avoid electric leakage

and electric shock accidents.

When removing the protective shell for cleaning, be careful not to touch the

touch buttons to avoid accidents in the operation of the product.

The battery is harmful to the environment, so it must be removed from

inside of product before abandoning. Frist, please make sure to turn off

machine and remove the power cord. Second, use a screwdriver to remove

the internal battery from the base of the product. Last, put the battery into a

separate battery waste bin, which will be handled by a specially assigned

person.

Please do not throw this product away with other household

waste. When it is no longer used, the product must be sent to the

appropriate department for recovery and recycling. For information

about the collection system, please contact your local government.

If you place electrical appliances in a landfill or garbage dump,

harmful substances may seep into the groundwater, enter the food

chain, and harm your health and life.

Please use the power adapter provided with the product. Before use, please

make sure that the input voltage is used as required by the adapter within the

voltage range (Adapter input : AC100-240V，50/60Hz；output：DC12V，

1A)

The user is not allowed to disassemble and replace the internal parts of the

fan at will. If there is any fault, please contact the after-sales service

department for repair.

If this product has technical improvements in the future, will not notify

otherwise.

If the appearance and color of the product are changed, please refer to the

actual product.

PERFORMANCE FEATURE MAIN PARTS

PRODUCT SIZE

WIRING DIAGRAM

PCB board

POWER ADAPTER SPECIFICATION

FOLDABLE FLOOR FAN & TABLE FAN

Product nameFoldable Floor Fan & Table Fan

ModelHF-201

Input voltageDC12V, 1A

Rated power14W

Product size11.8x11.6x 5.4 inches (Folded)

Net weight 4.6 lbs

Battery capacity18650 2200mAh x 3 rechargeable lithium battery

Battery charging time4 hours

Using time2.5-7 hours

Time setting1-8 hours

Packing listfolding fan x 1, IR remote control x 1,

power adapter x 1

Input dataAC100-240V, 50/60Hz

Output dateDC12V, 1A

Rear net

Fan blade

Oscillate

Gear -

Removable

front net

Gear +

On/OffNatural

wind Timing

Rotating

base

Infrared signal

receiving window

Screen

Adapter

Remote-control unit

(For the first time, please pull out

the battery insulation sheet)

Fan Speed

Timing

Oscillation

On/Off

The height of the fan can be adjusted with the extendable rod, and there

are three different folding modes, which can be used as a desktop fan or

a floor fan, suitable for office, family, dormitory, rent, etc., to meet more

demand. When it is lying idle, it can be folded and stored, which is easy

to save storage space.

Adjustable wind speed from 1 to 8 grades, adjustable timing from 1 to 8

hours.

Remote control operation, more comfortable to use.

180 degree wide angle air supply.

The model with battery built-in lithium battery to support charging

wireless use.

PRODUCT PARAMETERS OPERATION METHOD

CLEANING MAINTENANCE AND SAFETY MATTERS WARRANTY WARRANTY

Please insert the matching power adapter (12V, 1A) of the product into the

power input interface of the fan base, and connect the adapter to a household

power outlet

Put the fan in an upright position, adjust the telescopic rod and fan head

to a suitable height or angle, and control the fan's operation through the

base button or remote control

When not in use for a long time, it is recommended to fully charge in advance.

USER'S GUIDANCE

NOTICE

When the fan is operating, it can’t be recharged and only can be recharged in

Standby mode. When recharging, the LED screen display “ F ” and it flashes;

after full recharged, “ F ” keep lighting. When the battery power is low, the LED

screen flashes. LED off when power off.

❺Fan Height Adjustment Method

Pull up the telescopic rod to the needed

height. Press and hold the steel ball and

press down the rod to lower the height

of fan. In order to keep the telescopic

rod stable, please lock all steel balls in

place

salient

point

Extendable

rod

User Manual

HF-201

If the product(s) is damaged or defecve within a reasonable me, COMFIER oﬀers the

warranty as below.

Valid proof of purchase under this Warranty:

Order numbers from online purchases made through Comﬁer oﬃcial store (www.comﬁer.com)

or Comﬁer's direct-authorized resellers, currently only at Amazon/eBay/Walmart. For product(s)

obtained from other Channels, please contact the customer service of the Channel directly for

appropriate soluon.

Warranty Claim Procedures:

1. Any product the customer believes is defecve and seeks for warranty, the customer must

provide to Customer Support:

2. If the warranty claim is jusﬁed by Comﬁer Customer Support, customer(s) will obtain from

Comﬁer a Warranty/Return Authorizaon Number (RMA Number)

3. Comﬁer reserves the right to specify that items be returned to the designated warehouse for

inspecon or be inspected by our representave in the ﬁeld or be retained by customer.

4. Any claim for defecve merchandise returns must be packed in original packaging

5. The item(s) will be repaired or replaced or a refund credit will be issued once the item(s)

are delivered. When returning items with RMA# and a prepaid shipping label provided by

Comﬁer, Comﬁer takes responsibility for any damage or loss incurred in transit.

a) Valid proof of purchase (see below the deﬁnion of valid proof of purchase);

b) Pictures and/or descripon are required to claim defecve merchandise;

c) Model number and Series Number label aached to each product

Period

Within 30 Days

31- 90 Days

91 Days - 1 Year

1 Year - 3 Years

Return for refund

Yes

Yes aer being jusﬁed

Return for replacement

Yes if undamaged

Yes aer being jusﬁed

Who paid shipping?

Comﬁer

Buyer

Only to buyers who have

received extended warranty Buyer

Comﬁer warrants the product to be free from defects in workmanship and materials, under

normal use, for a period of 12 months from the original invoice date, except as noted below.

Comﬁer products can be repaired or replaced within warranty period or returned for refund

within 90 days if the products break down in the period of proper use.

The warranty extends only to consumers, NOT to any retailers or resellers. This warranty is

eﬀecve only if the product is purchased and operated in the country in which the product is

purchased. Warranty claims for product defects, unless extended warranty is registered,

expire 12 months from the purchase day. Warranty claims CANNOT be processed for items

that have exceeded the warranty period. The warranty does NOT cover the replaced,

refurbished product. The warranty does have other limitaons as below “Warranty

Limitaons”. To obtain warranty service on Comﬁer products, follow “Warranty Claim

Procedures” below.

1) Enter the following URL or scan the QR code below to ﬁnd COMFIER facebook

page and like it, enter“Warranty” to messenger to extend your warranty from

1 year to 3 years.

hps://www.facebook.com/comﬁermassager

OR 2) Email us at supportus@comﬁer.com with “Warranty” as subject line to extend

your warranty from 1 year to 3years

Extend Warranty for Free

Warranty Limitaons(this warranty does not include):

Refund Procedures:

Refer to h ps://www.comﬁer.com/pages/return-policy)

Warranty Disclaimer

THE WARRANTY PROVIDED HEREIN SHALL BE THE SOLE AND EXCLUSIVE WARRANTY. COMFIER

SHALL HAVE NO LIABILITY FOR, AND EXPRESSLY DISCLAIMS ANY WARRANTY OR AFFIRMATION

OF FACT, EXPRESS OR IMPLIED, OTHER THAN AS SET FORTH IN THIS WARRANTY STATEMENT,

INCLUDING, WITHOUT LIMITATION

(1) THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE;

(2) ANY WARRANTY OR AFFIRMATION OF FACT RELATED TO MISUSE, IMPROPER SELECTION,

RECOMMENDATION, OR MISAPPLICATION OF ANY PRODUCT; AND

(3) ANY WARRANTY OR AFFIRMATION OF FACT THAT THE CATALOGS, LITERATURE AND

WEBSITES IT PROVIDES ACCURATELY ILLUSTRATE AND DESCRIBE PRODUCTS.

Comﬁer reserves all the right for ﬁnal interpretaon of these Terms of Warranty and Return

Policy above and the aright to change, modify, add or remove porons of these terms at any

me without prior noﬁcaon.

Normal wear and tear; Any condion resulng from other than ordinary residenal wear or

any use for which the product was not intended, such as use in rental or contract trade or

commercial use; Any condion resulng from incorrect or inadequate maintenance or care;

Damage resulng from misuse, abuse, negligence, accidents or shipping damage, exposed to

environmental condions temperatures, water, improper operaon,improper installaon,

improper use of electrical supply; transportaon damage; the,vandalism or;Damage

resulng from the aachment or modiﬁcaon of any unauthorized accessories;Fail to show

the valid proof of purchase;Lost or stolen products;Items that have expired their warranty

period; No quality-related issues (aer 30 days of purchase);Free product/ Gi oﬀer by Comﬁer;

unauthorized repairs or modiﬁcaon; Replaced or refurbished product.Dissasfacon due to

buyer’s remorse (aer 30 days of purchase).

Tel: (248) 819-2623

Monday-Friday 9:00AM-4:30PM

NOTE: This equipment has been tested and found to comply with the limits for a Class B

digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide

reasonable protecon against harmful interference in a residen al installaon. This equipment

generates, uses and can radiate radio frequency energy and, if not installed and used in

accordance with the instrucons, may cause harmful interference to radio communicaons.

However, there is no guarantee that interference will not occur in a parcular installaon.

If this equipment does cause harmful interference to radio or television recepon, which can

be determined by turning the equipment oﬀ and on, the user is encouraged to try to correct

the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separaon between the equipment and receiver.

• Connect the equipment into an outlet on a circuit diﬀerent from that to which the receiver

is connected.

• Consult the dealer or an experienced radio / TV technician for help.

This device complies with Part 15 of the FCC Rules. Operaon is subject to the following two

condions:

(1) this device may not cause harmful interference, and (2) this device must accept any

interference received, including interference that may cause undesired operaon.

WARNING: Changes or modiﬁcaons to this unit is not expressly approved by the party

responsible for compliance could void the user's authority to operate the equipment.

FCC STATEMENT

*Please provide your order number before contacng customer support

Know more about Comﬁer

COMFIER TECHNOLOGY CO.,LTD

Address: 573 BELLEVUE RD NEWARK, DE 19713 USA

Tel: (248) 819-2623 (Monday-Friday 9:00AM-4:30PM)

Facebook: www.facebook.com/comﬁermassager

Email: supportus@comﬁer.com

Web: www.comﬁer.com

佛山卡蛙科技股份有限公司设计 zoey 校对审核工艺品质批准

0000

Rev01

图号

KW-MF01 云岭风英文说明书名称

版本

2022-11-26

日期

不带加湿器

封面

更改

技术要求

1、105g 单铜纸

2、折叠式(风琴折)

3、单色印刷：黑色

4、总尺寸：600*140mm

5、折叠后尺寸：100*140mm

6、双面印刷

增加伸缩杆调节说明 & 充电说明

11.8x11.6x18.5 inches (Table fan)

11.8x11.6x35.4 inches (Stand fan)

Comfier CO-201 User manual

Brand: Comfier

Model: CO-201

Type: User manual

Download PDF

report

Comfier CO-201 User manual

Comfier CO-201 User manual

Related papers

Other documents