Amax Lighting LED-9-BK User manual

Brand: Amax Lighting

Model: LED-9-BK

Type: User manual

This manual is also suitable for

LED-9-WT

SAFETY PRECAUTIONS:

1. TURN OFF ELECTRICAL POWER BEFORE STARTING INSTALLATION OF LIGHT FIXTURE.

2. THIS PRODUCT MUST BE INSTALLED IN ACCORDANCE WITH THE APPLICABLE INSTALLATION CODE

BY A CERTIFIED ELECTRICIAN FAMILIAR WITH LOCAL MUNICIPAL CODES AND REQUIREMENTS.

3. CAUTION - RISK OF ELECTRIC SHOCK. CONSULT A QUALIFIED ELECTRICIAN TO ENSURE CORRECT

BRANCH CIRCUIT CONDUCTOR.

PART QTY A B C D

A 1

B 2

C 3

D 1

E 4

F 4 E F

OPTION #1: JUNCTION BOX MOUNTING

1. Remove glass lens by gently 1. Remove glass lens by gently

rotating and lifting. rotating and lifting.

2. Install the mounting plate with

2. Place mounting screws (included) provided mounting plate screws

in mounting plate screwing in halfway. in your desired direction (screw

Add 1/2" Romex connector (not anchors included).

included) in the center hole and pull Leave mounting screws in the

supply wires from junction box. mounting plate in halfway for

fixture fastening purpose.

3. Install mounting plate before 3. Open blind konckout and install

connecting supply wires to wires on 1/2" Romex connector (not included),

the fixture with wire nuts. Connect fasten conduit or flexible tube.

white to white, black to black, green Connect supply wires to wires on

or bare copper wire to green wire. the fixture with wire nuts. Connect

If wiring to another light, also connect white to white, black to black, green

white to white, black to black, green or bare copper wire to green wire.

or bare copper wire to green wire. If wiring to another light, also connect

white to white, black to black, green

Attach fixture to mounting screws, or bare copper wire to green wire.

turn fixture counter-clockwise to lock.

Secure fixture by tightening mounting

Attach fixture to mounting screws,

screws. turn fixture counter-clockwise to lock.

Secure fixture by tightening mounting

screws.

4. To install glass lens, hold lens up

to fixture, and rotate until notches in 4. To install glass lens, hold lens up

lens line up with tabs in fixture. to fixture, and rotate until notches in

Continue rotating until lens stops. lens line up with tabs in fixture.

Continue rotating until lens stops.

This LED light is compatible to be dimmed by LUTRON #DVCL-153P, MACL-153MH, TGCL-153P,

DV-600P; LEVITON #6633, 6633-P, 6672, 6674, IPL06.

Dimming levels may vary by different dimmer.

Customer service: 888-945-5221

Do not return to store.

Mounting plate screw

Screw anchor

Made in China

LED INDUSTRIAL DRUM

OPTION #2: FIXTURES LINKABLE MOUNTING (NO JUNCTION BOX)

DESCRIPTION

LED light

Mounting screw

Wire nut

Mounting plate

LED-9

Amax Lighting LED-9-BK User manual

Brand: Amax Lighting

Model: LED-9-BK

Type: User manual

This manual is also suitable for

LED-9-WT

Download PDF

report

Amax Lighting LED-9-BK User manual

This manual is also suitable for

Amax Lighting LED-9-BK User manual

Other documents