2. RF IDeas
  3. Desktop and Surface Mount Readers

RF IDeas Desktop and Surface Mount Readers User guide

  • Hello! I've reviewed the document regarding cleaning recommendations for the rf IDEAS WAVE ID Solo and WAVE ID Plus readers. This document specifies suitable cleaning methods, including the use of mild soap and water or disinfectant wipes - specifically Clorox Disinfecting Wipes, Super Sani-Cloth, and more. I'm ready to assist with your questions about the cleaning procedures.
  • What is the recommended cleaning process?
    Can I use Clorox Disinfecting Wipes to clean the readers?
    Are Super Sani-Cloth wipes safe for cleaning the readers?
Cleaning Recommendations for Desktop and Surface Mount Readers
The recommended cleaning
process for all WAVE ID® Solo
and WAVE ID® Plus desktop and
surface mount readers is using
a clean, soft cloth dampened with
mild soap and water, gently wiping
away any dust or dirt. Alternatively,
one of the cleaning methods
shown below may be used.
Clorox® Disinfecting Wipes
Super Sani-Cloth®
Sani-Cloth® AF3
Clorox® Dispatch® Disinfectant Wipes
CaviWipes™
SONO® Ultrasound Wipes
If you have support questions, please email us at
TechSupport@rfIDEAS.com or call 866-492-8231.
rf IDEAS® and WAVE ID® are registered trademarks of rf IDEAS, Inc. All other trademarks,
service marks, and product or service names are property of their respective owners.
Trust begins here.™
PA-144
Test Results of Disinfectants and Cleansers applied to WAVE ID® Solo
and WAVE ID® Plus Desktop and Surface Mount Readers
Disinfectant or Cleanser Pass Fail Methodology
Clorox Disinfecting Wipes XRubbed vigorously.
Super Sani-Cloth XPer recommended application.
Sani-Cloth AF3 XPer recommended application.
Clorox Dispatch Disinfectant Wipes XPer recommended application.
CaviWipes XPer recommended application.
SONO Ultrasound Wipes XPer recommended application.
Tests were performed at rf IDEAS by the Quality Department.
/