Kogan KDCMPTNT3PA User guide

Brand: Kogan

Model: KDCMPTNT3PA

Type: User guide

Kogan KDCMPTNT3PA is a 3-person camping tent designed for temporary outdoor use. It features a dome-shaped design with two intersecting tent poles for stability. The tent includes a fly for added weather protection and four guy ropes for securing it to the ground in windy conditions. It also has plastic hooks and hook-and-loop strips for easy assembly and disassembly. With dimensions of 140cm in height, 220cm in width, and 220cm in depth, the tent provides ample space for three individuals and their gear.

Kogan KDCMPTNT3PA is a 3-person camping tent designed for temporary outdoor use. It features a dome-shaped design with two intersecting tent poles for stability. The tent includes a fly for added weather protection and four guy ropes for securing it to the ground in windy conditions. It also has plastic hooks and hook-and-loop strips for easy assembly and disassembly. With dimensions of 140cm in height, 220cm in width, and 220cm in depth, the tent provides ample space for three individuals and their gear.

CAMPING TENT

3 PERSONS

KDCMPTNT3PA

Ensure to read all instructions and warnings in this user guide prior to first use.

• This tent is designed to be a temporary structure. Do not use this tent as a

permanent dwelling.

• Keep the tent away from all flames heat sources to avoid potential damage.

• Do not store flammable liquids inside the tent.

• Do not spray the tent with insecticides. They can be flammable and may damage

the tent’s material.

• Ensure the area the tent is set up is clear of sharp objects and obstructions to avoid

damage to the material.

• Do not pitch the tent under trees due to the potential of lightning strikes and falling

tree branches.

• Do not pitch the tent near a cliff.

• Do not leave the tent pitched in the face of strong winds. Disassemble the tent

before seeking refuge.

• Ensure all pegs are fully secured before using the tent.

• Do not cook inside the tent.

• Do not smoke inside the tent.

• If wet, always allow the tent to dry before storing in the carrying bag to prevent the

growth of mildew.

SAFETY & WARNINGS

• Tent body (x1)

• Fly (x1)

• Tent pole (x2)

• Peg (x12)

• Guy rope (x4)

• Carry bag (x1)

Step 1: Ensure you are in a flat open area clear of any obstructions. Remove and lay out all

components from carry bag.

COMPONENTS LIST

ASSEMBLY

Step 2: Stretch the tent body flat on the ground.

Step 3: Unfold and connect the joints of one tent pole. Repeat this process with the other

tent pole.

x2

Step 4: Insert one end of a tent pole into a pin located at the corners of the tent body.

Secure the other end of the tent pole to the pin located at the corner diagonally opposite.

Repeat this process to the other tent pole with the two remaining pins.

Once secured, pull up both tent poles. They should resemble a dome shape, intersecting

each other in the centre.

Step 5: Tie the string from the centre of the tent body to the intersection of the two tent

poles.

Step 6: Clasp the plastic hooks located on all four sides of the tent body to the tent poles.

This completes the assembly of the tent body.

Step 7: To secure the fly, attach the hooks on each corner of the fly to the metal rings

located on each corner of the tent body.

Step 8: Further secure the fly by tying the hook and loop strips located on the four sides of

the fly to the tent poles.

Step 9: Secure the tent down by inserting pegs onto the four corners of the tent.

Tent assembly is now complete.

Note:

The guy ropes may also be used to further secure the tent to the ground during windier

conditions.

Step 1: Remove all pegs from the four corners of the tent.

Step 2: Detach the hooks located on the fly from the metal rings on each corner of the tent

body.

DISASSEMBLY

Step 3: Detach the hook and loop strips located on the fly from the poles.

Step 4: Remove the fly from the tent body.

Step 5: Unclasp the plastic hooks on all four sides the tent body from the tent poles.

Step 6: Untie the string on the top of the tent body from the tent poles.

Step 7: Release the ends of each tent pole from the metal pins. Remove the two tent poles

from the tent body.

Step 8: Fold the two tent poles up back to their original state.

Step 9: Fold up the tent body and place all components back into the carry bag.

Height (A): 140cm

Width (B): 220cm

Depth (C): 220cm

DIMENSIONS

Need more information?

We hope that this user guide has given you

the assistance needed for a simple set-up.

For the most up-to-date guide for your product,

as well as any additional assistance you may require,

head online to help.kogan.com

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16

Kogan KDCMPTNT3PA User guide

Brand: Kogan

Model: KDCMPTNT3PA

Type: User guide

Kogan KDCMPTNT3PA is a 3-person camping tent designed for temporary outdoor use. It features a dome-shaped design with two intersecting tent poles for stability. The tent includes a fly for added weather protection and four guy ropes for securing it to the ground in windy conditions. It also has plastic hooks and hook-and-loop strips for easy assembly and disassembly. With dimensions of 140cm in height, 220cm in width, and 220cm in depth, the tent provides ample space for three individuals and their gear.

Download PDF

Other documents