2. CTA
  3. LT-LFSDM

CTA LT-LFSDM Installation guide

  • Hello! I've reviewed the user manual for the CTA LT-LFSDM Locking & Folding Security Laptop Desk Mount. This document provides instructions on mounting the device, securing your laptop, using the anti-theft cable lock and adjusting the tilt angles. I'm ready to answer any questions about the features and installation of the mount.
  • What is included in the package?
    How do I release the holder arms?
    Is a drill included in package?
    How do I lock the Holder again?
Locking & Folding Security Laptop Desk Mount
LT-LFSDM
INSTALLATION - MANUAL
INSTALLATION:
1.Installing the Mount to Table :
2. Releasing the Holder Arms :
1A. Make holes on the surface where desk
mount (A) will be fixed as shown above.
1B. Place the laptop desk mount (A) matching the holes
drilled on surface and screw in the provided x2 screws(C)
trough the base with a screw driver (not provided) until
securely tightened.
CONTENTS:
2A. Insert the key (C) provided into the lock and turn it clockwise to set into unlocked mode and release the
arms. Slide open the arms until laptop can fit in.
**Drill and Screwdriver for
illustration only and not included
x1
Laptop
Desk Mount
A
x1
Key
Set
B
x1 Screws
C
x1
Cable
Lock
D
CA
A
B
A
B
A
B
3.Inserting Laptop into Holder :
4.Anti-Theft Cable Lock
Adjusting Tilt Angles of Holder
1.Loop one end of the cable (D) and anchor it
around something fixed such as a table leg as
illustrated above.
1. Tilt screen between 45º - 125º as shown to find preferred viewing setup.
2. Take the other end of the cable (D) with the metal end and
insert it into the holder at the location shown while key (B) is
inserted and holder (A) is still in unlocked mode. Then turn the
key to lock and remove it from the holder to have cable lock
affixed to holder.
3A. Insert the laptop and retract the arms until securely held. Turn key back counter clockwise to lock it.
**Laptop for illustration only and not included
D
AA
A
D
B
A
D
B
A
45º 125º
/