ABH PT105SC Operating instructions

Brand: ABH

Model: PT105SC

Type: Operating instructions

ISSUED 11-08-21

c 2021 ABH Mfg., Inc.

printed in USA

www.abhmfg.com

E-mail: [email protected]

Architectural Builders Hardware Mfg., Inc.

1222 Ardmore Ave., Itasca, IL 60143

630.875.9900; FAX 800.9FAXABH (932.9224)

NOTES:

1. USE TRANSFER CASE HOUSING AS

DRILLING TEMPLATE.

2. ONLY STRANDED WIRES TO BE EMPLOYED.

3. SPRING CONDUIT FITS WIRE BUNDLES UP TO

5/16" THICK.

4. USE CARE WHEN INSERTING WIRES THROUGH

THIS DEVICE.

5. RECTANGULAR CUT-OUT IS 11/16" DEEP (MIN.)

FOR WOOD FRAME & DOOR.

6. WIRES SHOULD BE LABELED.

7. SIZE AND NUMBER OF WIRES MUST COMPLY

WITH THE NATIONAL ELECTRICAL CODE, NFPA,

AND LOCAL ELECTRICAL CODES.

8. THIS DEVICE IS INTENDED FOR LOW VOLTAGE

USE ONLY (30 VAC, 42.5 VDC, 10 WATTS MAX.)

PAGE 1 OF 1

PT105SC INSTALLATION TEMPLATE

WITH SWING CLEAR HINGES - 90 DEGREES

PT105SC

PT105SC TEMPLATE-03.DWG

1.0

0.70

.125 DIA.

(4PL)

FROM

10.28

10.88

SOURCE

POWER

DOOR C

L

HARDWARE

TO

ELECTRIC

FRAME DOOR

10.88

10.28

1.0

11.438

1.500

1.500

8-32 X 3/8" PHILLIPS FLAT HEAD

UNDRECUT MACHINE SCREW

QTY

DOOR

FRAME #8 X 3/4" PH. FLAT HEAD SHEET

METAL SCREW

4

4

SCREW DETAIL

1

ABH PT105SC Operating instructions

Brand: ABH

Model: PT105SC

Type: Operating instructions

Other documents