...to complete your networkwww.conteg.com
CONTEG SOLUTIONS
for the next decade!
:: cable protection in openings
2
DPKPKAR
Edging strips and brush panels help to protect cables on
entry and can limit dust penetration into the rack. In all
cases they are installed into the cable inlet openings.
DESCRIPTION:
• Installedincableentryopenings(300x100mm)
• Mountingholesforwallinstallationontheback
CABLE PROTECTION IN OPENINGS
Code Description
DP-KP-LEM
Rubberpieceonedgesofcableentries(length790mm)for
free-standingracks
DP-KP-HCE
Hermeticdust-proofpanelforIP54racks,readyfor24x
12,6mmand10x10,5mmcableopenings
DP-KP-KAR Dust-proofpanelwithbrush-forfree-standingracks
DP-KP-KAR3 Dust-proofpanelwithbrush-forwall-mountingracks
DP-KP-KAR4 Dust-proofpanelwithdoublebrush-forfree-standingracks
DP-KP-KAR4-D
Divideddustproofpanelwithdoublebrush-forfree-
standingracks
DP-KP-KAR-A
Dust-proofpanelwithdoublebrush-forraisedoor
installation(openingsize410x215mm)
DP-KP-RB4 Roundcableentrywithbrush,4" (100mm)
DPKPHCE
DPKPKARA
DP-KP-RB4
DPKPKAR4 DPKPKAR4D