Havis C-VS-2400-CHGR-2 Datasheet

Category
Car kits
Type
Datasheet
17” Console 24” Console
25” ConsoleMonitor Mount
www.havis.com
1-800-524-9900
Maximize your mobile workspace with intuitive
mounting and computing solutions from Havis.
We strive to engineer products that make
performing tasks during long shifts easier and
more comfortable. Havis now offers three all
new equipment consoles, including one low-profile, that
allow for safer mounting of controls and accessories while
providing a perfect mounting location for computer solutions.
For additional mounting space, Havis has released four new trunk mounting products, including single and
double slide-out trunk trays and passenger and driver’s side trunk mounts.
Havis offers three custom-fit consoles designed specifically for the new 2011 Dodge Charger that replace
the OEM console without permanent vehicle modification. A new swing out dash monitor mount is also
available for mounting many universal computer monitors.
Industry-Leading Products
for the New Charger
Equipment Mounting to Fit Your Needs
*See website for side view depth measurements
Vehicle Specific 17” Console (C-VS-0809-CHGR-1)
This new low profile console was specifically designed
for the 2011 Dodge Charger. The console reduces the
height between seats and is ideal for laptop mounting.
The 24” custom-fit console provides more space
for control heads and accessories. This console is
recommended for low-profile applications.
Vehicle Specific 24” Console (C-VS-2400-CHGR-2)
The 25” console is custom fit and large enough to
accommodate deep control heads with three cutouts
for two 12 volt plug outlets and one MP3/USB port.
Vehicle Specific 25” Console (C-VS-2500-CHGR-1)
Swing Out Monitor Mount (C-DMM-119)
The swing out dash monitor mount allows monitor
to be conveniently positioned for optimal viewing
angles for both driver and passenger.
All New Mobile Office Solutions
for the 2011 Dodge Charger
Above photo shows Premium
Package for another vehicle
Driver Side Trunk Mount
(C-TSM-CHGR-D-1)
Passenger Side Trunk Mount
(C-TSM-CHGR-P-1)
Double Shelf Trunk Tray
(C-TTB-CHGR-3-DD)
Single Shelf Trunk Tray
(C-TTB-CHGR-3)
K9 Transport System
(KK-K9-D24-K)
www.havis.com
1-800-524-9900
Dodge Charger_NPR_7-11
Premium Passenger Side Mount Package Features:
Vehicle-specific mounting base that mounts to existing OEM seat bolts
for easy installation and requires no modification to vehicle
Heavy duty height-adjustable poles that bolt to vehicle-specific base
for on-demand adjustability for multiple users and easy storage
Upgraded swing arm with motion adapters that are ideal for computer
usage from both the driver and front passenger seats
Stability support arms that add upper pole support for premium top
level stability
Part #: PKG-PSM-244
Standard Passenger Side Mount Package
also available (PKG-PSM-144)
Trunk Side Mount Features:
Electronic equipment is protected when
hinged platform is in closed position.
Designed for use with full size spare tire
when C-TTB-CHGR-3 is not needed.
C-TSM-CHGR-P-1 is preferred as battery
is nearby and full size spare is offset on
driver’s side.
Full Width Trunk Tray Features:
Constructed of welded steel for added
strength and support.
Equipment mounting surface measures
31” wide x 19” deep.
Requires use of C-STB-CHGR spare tire
bracket to relocate full size spare tire.
© 2011 Havis, Inc
K9 Transport System Features:
K9 unit is designed to maximize officer room, and utilizes the entire
rear passenger seat area
Radius corners, molded edges and properly sized ventilation holes keep
your K9 partner safe and comfortable
Rear guard folds down to allow easy access and cleaning of rear
window deck
K9 unit is fabricated from heavy-duty aluminum with white powder
coat finish for long-lasting strength, durability and cleanliness
All New Mobile Office Solutions
for the 2011 Dodge Charger
  • Page 1 1
  • Page 2 2

Havis C-VS-2400-CHGR-2 Datasheet

Category
Car kits
Type
Datasheet

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI