1. 2.
INSTALLATION INSTRUCTIONS
4.3.
Please read all of the instructions and look at the pictures before attaching the ProClip.
1. Press the thin end of the enclosed gap opener into the gap between the center console and the surrounding
frame, to widen the gap.
2. Hold the gap opener in the gap. In the same time: press the curved edge on the left part of the ProClip into the
gap next to the gap opener. Flip the right part of the ProClip forward so the curved left edge hooks behind the
center console. Pull out the gap opener.
3. Press the gap opener into the gap in the center console sidewall. Press downward on the right side of the
ProClip so the angled edge hooks into the gap next to the gap opener. Press the right end of the ProClip toward
the center console sidewall so the angled edge goes all the way into the gap. Pull out the gap opener.
4. The ProClip is in place.
2(2)