Panasonic ET-D75LE30 Datasheet

ET-D75LE30
Panasonic
Brand
Panasonic
Model
ET-D75LE30
Category
Projection lenses
Type
Datasheet

This manual is also suitable for

269 (10-19/32)
∅150 ( 5-29/32)
607
(23-29/32)
73
(2-7/8)
540
(21-1/4)
12 5
(4 -29/32)
S PEC F ILE
ET-D75LE10
Zoom Lens for DLP
™
Projectors
As of September 2010
SFD10A001-1
1/1
Specifications
F value: 2.5
Focal distance (f): 27.4 mm–35.4 mm
Throw ratio: 1.3 –1.7:1 for PT-DZ12000/DZ8700 (16:10 aspect ratio),
1.4 –1.8:1 for PT-D12000/DS8500 (4:3 aspect ratio),
1.4 –1.9:1 for PT-DW100/DW8300 (16:9 aspect ratio)
Dimensions (W × H × D): 150 × 150 × 269 mm (5-29/32˝ × 5-29/32˝ × 10-19/32˝)
Weight: 6.1 kg (13.4 lbs)
The throw ratio is an approximate value calculated by dividing the screen width by the projection distance.
DLP and the DLP logo are trademarks of Texas Instruments.
Weights and dimensions shown are approximate. Specifications subject to change without notice.
Dimensions
This zoom lens is designed for use with the PT-DZ8700, PT-DZ110X or other 3-chip DLP
™
projector. The lens makes
it possible to vary the projection distance by changing the focal distance.
NOTE: Please use the lens only on the specified Panasonic 3-chip DLP
™
projector.
unit : mm (inch)
NOTE: This illustration is not drawn to scale.
The illustration shows the lens attached to the PT-DZ8700/DS8500/DW8300/DZ110X/DS100X/DW90X.
The illustration shows the lens attached to the PT-DZ12000/D12000/DW100.
265 (10-7/16)
∅134 (5-9/32)
607
(23-29/32)
69
(2-23/32)
540
(21-1/4)
121
(4-3 / 4)
S PEC F ILE
ET-D75LE20
Zoom Lens for DLP
™
Projectors
As of September 2010
SFD10A002-1
1/1
Specifications
F value: 2.5
Focal distance (f): 35.0 mm– 50.9 mm
Throw ratio: 1.7– 2.4:1 for PT-DZ12000/DZ8700 (16:10 aspect ratio),
1.8 – 2.6:1 for PT-D12000/DS8500 (4:3 aspect ratio),
1.8 – 2.7 :1 for PT-DW100/DW8300 (16:9 aspect ratio)
Dimensions (W × H × D): 134 × 134 × 265 mm (5-9/32˝ × 5-9/32˝ × 10-7/16˝)
Weight: 5.2 kg (11.5 lbs)
The throw ratio is an approximate value calculated by dividing the screen width by the projection distance.
DLP and the DLP logo are trademarks of Texas Instruments.
Weights and dimensions shown are approximate. Specifications subject to change without notice.
Dimensions
This zoom lens is designed for use with the PT-DZ8700, PT-DZ110X or other 3-chip DLP
™
projector. The lens makes
it possible to vary the projection distance by changing the focal distance.
NOTE: Please use the lens only on the specified Panasonic 3-chip DLP
™
projector.
unit : mm (inch)
NOTE: This illustration is not drawn to scale.
The illustration shows the lens attached to the PT-DZ8700/DS8500/DW8300/DZ110X/DS100X/DW90X.
The illustration shows the lens attached to the PT-DZ12000/D12000/DW100.
265 (10-7/16)
∅134 (5-9/32)
607
(23-29/32)
69
(2-23/32)
540
(21-1/4)
121
(4-3 / 4)
S PEC F ILE
ET-D75LE30
Zoom Lens for DLP
™
Projectors
As of September 2010
SFD10A003-1
1/1
Specifications
F value: 2.5
Focal distance (f): 50.5 mm– 97.9 mm
Throw ratio: 2.4 – 4.7:1 for PT-DZ12000/DZ8700 (16:10 aspect ratio),
2.6 – 5.1:1 for PT-D12000/DS8500 (4:3 aspect ratio),
2.7 – 5.2:1 for PT-DW100/DW8300 (16:9 aspect ratio)
Dimensions (W × H × D): 134 × 134 × 265 mm (5-9/32˝ × 5-9/32˝ × 10-7/16˝)
Weight: 5.2 kg (11.5 lbs)
The throw ratio is an approximate value calculated by dividing the screen width by the projection distance.
DLP and the DLP logo are trademarks of Texas Instruments.
Weights and dimensions shown are approximate. Specifications subject to change without notice.
Dimensions
This zoom lens is designed for use with the PT-DZ8700, PT-DZ110X or other 3-chip DLP
™
projector. The lens makes
it possible to vary the projection distance by changing the focal distance.
NOTE: Please use the lens only on the specified Panasonic 3-chip DLP
™
projector.
unit : mm (inch)
NOTE: This illustration is not drawn to scale.
The illustration shows the lens attached to the PT-DZ8700/DS8500/DW8300/DZ110X/DS100X/DW90X.
The illustration shows the lens attached to the PT-DZ12000/D12000/DW100.
268 (10-9/16)
∅130 ( 5-1/ 8)
730
(28-7/8)
124
(4-7/8)
540
(21-1/4)
124
(4-7/8)
S P E C F I L E
ET-D75LE40
Zoom Lens
As of April 2012
SFD12A008
1 / 1
Specifications
F value: 2.5
Focal distance (f): 96.6–154.1 mm
Throw ratio: 4.6–7.4:1 for PT-DZ21K/DZ8700/DZ110X (16:10 aspect ratio),
5.0 – 8.0:1 for PT-DS20K/DS8500/DS100X (4:3 aspect ratio),
5.1– 8.2:1 for PT-DW17K/DW8300/DW90X (16:9 aspect atio)
Dimensions (W × H × D): 130 × 130 × 268 mm (5-1/8 × 5-1/8 × 10-9/16 inches)
Weight: Approximately 5.0 kg* (11.0 lbs*)
Applicable projector: PT-DZ21K/DS20K/DW17K/DZ8700/DS8500/DW8300/DZ110X/DS100X/DW90X
Dimensions
This zoom lens is designed for use with Panasonic’s applicable projectors. The lens makes it possible to vary the
projection distance by changing the focal distance.
NOTE: Please use the lens only on the specified Panasonic projector.
unit : mm (inch)
NOTE: This illustration is not drawn to scale.
The illustration shows the lens attached to the PT-DZ8700/DS8500/DW8300/DZ110X/DS100X/DW90X.
The illustration shows the lens attached to the PT-DZ21K/DS21K/DW17K.
*
Average value. May differ depending on the actual unit.
T
he throw ratio is an approximate value calculated by dividing the screen width by the projection distance.
NOTE: Please read the projector’s instruction manual for throw distances.
Weights and dimensions shown are approximate. Specifications subject to change without notice.
347 (13-21/32)
∅160 ( 6-5/16 )
730
(28-3/4)
203
(8)
540
(21-1/4)
203
(8)
S P E C F I L E
ET-D75LE50
Fixed-Focus Lens
As of April 2012
SFD12A009
1 / 1
Specifications
F value: 2.5
Focal distance (f): 14.8 mm
Throw ratio: 0.7:1 for PT-DZ21K/DZ8700/DZ110X (16:10 aspect ratio),
0.8:1 for PT-DS20K/DS8500/DS100X (4:3 aspect ratio),
0.8:1 for PT-DW17K/DW8300/DW90X (16:9 aspect atio)
Dimensions (W × H × D): 160 × 160 × 347 mm (6-5/16 × 6-5/16 × 13-21/32 inches)
Weight: Approximately 7.1 kg* (15.7 lbs*)
Applicable projector: PT-DZ21K/DS20K/DW17K/DZ8700/DS8500/DW8300/DZ110X/DS100X/DW90X
Dimensions
This fixed-focus lens is designed for use with Panasonic’s applicable projectors. The short-throw lens is ideal
for rear projection.
NOTE: Please use the lens only on the specified Panasonic projector.
unit : mm (inch)
NOTE: This illustration is not drawn to scale.
The illustration shows the lens attached to the PT-DZ8700/DS8500/DW8300/DZ110X/DS100X/DW90X.
The illustration shows the lens attached to the PT-DZ21K/DS21K/DW17K.
*
Average value. May differ depending on the actual unit.
T
he throw ratio is an approximate value calculated by dividing the screen width by the projection distance.
NOTE: Please read the projector’s instruction manual for throw distances.
Weights and dimensions shown are approximate. Specifications subject to change without notice.
356.5 (14-1/32)
∅160 (6-5/16)
607
(23-29/32)
160
(6-5/16)
REMOTE 1 REMOTE 2 IN SERIAL LAN
VIDEO
S-VIDEO IN
RGB 1 IN DVI-D INRGB 2 IN
IN
IN R/PR G/Y B/PB
SYNC/HD VD
OUT
OUT RS-232C IN RS-422 IN RS-422 OUT
SERIAL LAN
VIDEO
S-VIDEO IN
RGB 1 IN DVI-D INRGB 2 IN
IN R/PR G/Y B/PB
SYNC/HD VD
OUT
RS-422 IN RS-422 OUT
540
(21-1/4)
212
(8-11/32)
S PEC F ILE
ET-D75LE6
Zoom Lens for DLP
™
Projectors
As of September 2010
SFD10A006-1
1/1
Specifications
F value: 2.5
Focal distance (f): 19.63 mm – 23.54 mm
Throw ratio: 0.9 –1.1:1 for PT-DZ12000/DZ8700 (16:10 aspect ratio),
1.0 –1.2:1 for PT-D12000/DS8500 (4:3 aspect ratio),
1.0 –1.2:1 for PT-DW100/DW8300 (16:9 aspect ratio)
Dimensions (W × H × D): 160 × 160 × 356.5 mm (6-5/16˝ × 6-5/16˝ × 14-1/32˝)
Weight: 8.7 kg (19.2 lbs)
The throw ratio is an approximate value calculated by dividing the screen width by the projection distance.
DLP and the DLP logo are trademarks of Texas Instruments.
Weights and dimensions shown are approximate. Specifications subject to change without notice.
Dimensions
This zoom lens is designed for use with the PT-DZ8700, PT-DZ110X or other 3-chip DLP
™
projector. The lens makes
it possible to vary the projection distance by changing the focal distance.
NOTE: Please use the lens only on the specified Panasonic 3-chip DLP
™
projector.
unit : mm (inch)
NOTE: This illustration is not drawn to scale.
The illustration shows the lens attached to the PT-DZ8700/DS8500/DW8300/DZ110X/DS100X/DW90X.
The illustration shows the lens attached to the PT-DZ12000/D12000/DW100.
404 (15-29/32)
∅150 ( 5-29/32)
REMOTE 1 REMOTE 2 IN SERIAL LAN
VIDEO
S-VIDEO IN
RGB 1 IN DVI-D INRGB 2 IN
IN
IN R/PR G/Y B/PB
SYNC/HD VD
OUT
OUT RS-232C IN RS-422 IN RS-422 OUT
607
(23-29/32)
202.5
(7-31/32)
540
(21-1/4)
25 4
(10)
S PEC F ILE
ET-D75LE8
Zoom Lens for DLP
™
Projectors
As of September 2010
SFD10A007-1
1/1
Specifications
F value: 2.5–2.7
Focal distance (f): 154 mm – 289 mm
Throw ratio: 7.3 –13.8:1 for PT-DZ12000/DZ8700 (16:10 aspect ratio),
7.9 –15.0:1 for PT-D12000/DS8500 (4:3 aspect ratio),
8.2 –15.4:1 for PT-DW100/DW8300 (16:9 aspect ratio)
Dimensions (W × H × D): 150 × 150 × 404 mm (5-29/32˝ × 5-29/32˝ × 15-29/32˝)
Weight: 8.5 kg (18.7 lbs)
The throw ratio is an approximate value calculated by dividing the screen width by the projection distance.
DLP and the DLP logo are trademarks of Texas Instruments.
Weights and dimensions shown are approximate. Specifications subject to change without notice.
Dimensions
This zoom lens is designed for use with the PT-DZ8700, PT-DZ110X or other 3-chip DLP
™
projector. The lens makes
it possible to vary the projection distance by changing the focal distance.
NOTE: Please use the lens only on the specified Panasonic 3-chip DLP
™
projector.
unit : mm (inch)
NOTE: This illustration is not drawn to scale.
The illustration shows the lens attached to the PT-DZ8700/DS8500/DW8300/DZ110X/DS100X/DW90X.
The illustration shows the lens attached to the PT-DZ12000/D12000/DW100.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7

Panasonic ET-D75LE30 Datasheet

ET-D75LE30
Panasonic
Brand
Panasonic
Model
ET-D75LE30
Category
Projection lenses
Type
Datasheet
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents