Altronix SMP10PM12P8 Datasheet

Altronix
Brand
Altronix
Model
SMP10PM12P8
Category
Power extensions
Type
Datasheet

This manual is also suitable for

• These power supply/chargers will convert a 115VAC / 60Hz input, into a
regulated 12VDC output @ 10 amp continuous supply current
(see specifications).
• 12VDC output.
• 10 amp supply current.
• Input 115VAC 50/60 Hz., 1.45 amp.
• Filtered and electronically regulated outputs.
• Short circuit and thermal overload protection.
• Built-in charger for sealed lead acid or
gel type batteries.
• Maximum charge current .7 amp.
• AC fail supervision (form "C" contacts).
• Low battery supervision (form "C" contacts).
• Battery presence supervision (form "C" contacts).
• Power ON/OFF switch.
• AC input and DC output LED indicators.
• Power supply, enclosure, cam lock & battery leads.
• Enclosure:
- Combination knockouts are 1/2” and 3/4”
- Accommodates up to two (2)
12VDC/7AH batteries.
• Product weight:
- SMP10PM12P8: 7.9 lbs.
- SMP10PM12P8CB: 7.9 lbs.
• Shipping weight:
- SMP10PM12P8: 8.9 lbs.
- SMP10PM12P8CB: 8.9 lbs.
SMP10PM12P8
• Eight (8) fuse protected outputs.
• Outputs are rated @ 3.5 amp.
SMP10PM12P8CB
• Eight (8) PTC protected outputs.
• Outputs are rated @ 2.5 amp.
SMP10PM12P8, SMP10PM12P8CB
Supervised Power Supply/Chargers
Rev. DSSMP10PM12P8 - B23F
Overview
Specifications
Altronix Corp. - 140 58th Street, Brooklyn, NY 11220 • 718-567-8181 • 888-258-7669 • altronix.com
1.20”
1.40”
5.10”
5.10”
3.25”
1.00”
1.00”
10.50”
1.00”
1.00”
3.25”
3.25”
0.9375”
6.5625”
5.10”
1.40”
4.85” 4.85” 1.40”
3.25”
1.20”
0.75”
0.9375”
12.50”
11.00”
Access for Linecord
Enclosure Dimensions
13"H x 13.5"W x 3.25"D
  • Page 1 1
  • Page 2 2

Altronix SMP10PM12P8 Datasheet

Altronix
Brand
Altronix
Model
SMP10PM12P8
Category
Power extensions
Type
Datasheet
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers