Mean Well LPV-35-12 Datasheet

LPV-35-12
Mean Well
Brand
Mean Well
Model
LPV-35-12
Category
Power supply units
Type
Datasheet

This manual is also suitable for

Mean Well LPV-35-12 is a 35W single output switching power supply with universal AC input and a wide range of protections, making it suitable for various applications, including LED lighting and moving signs. It features constant voltage mode, withstands voltage surges, and provides short circuit, overload, and over voltage protections. The fully isolated plastic case and cooling by free air convection ensure safe and reliable operation. With a 2-year warranty, the LPV-35-12 offers a cost-effective and dependable power solution.

Mean Well LPV-35-12 is a 35W single output switching power supply with universal AC input and a wide range of protections, making it suitable for various applications, including LED lighting and moving signs. It features constant voltage mode, withstands voltage surges, and provides short circuit, overload, and over voltage protections. The fully isolated plastic case and cooling by free air convection ensure safe and reliable operation. With a 2-year warranty, the LPV-35-12 offers a cost-effective and dependable power solution.

SPECIFICATION
MODEL LPV-35-5 LPV-35-12 LPV-35-15 LPV-35-24 LPV-35-36
DCVOLTAGE
RATEDCURRENT
CURRENTRANGE
RATEDPOWER
OUTPUT
LINEREGULATION
LOADREGULATION
SETUP,RISETIME Note.6
HOLDUP TIME(Typ.)
VOLTAGERANGE
FREQUENCY RANGE
EFFICIENCY (Typ.)
ACCURRENT
INPUT
INRUSHCURRENT(max.)
LEAKAGECURRENT
SAFETY STANDARDS
HARMONICCURRENT
EMSIMMUNITY
WORKINGTEMP.
WORKINGHUMIDITY
STORAGETEMP.,HUMIDITY
TEMP.COEFFICIENT
VIBRATION
MTBF
DIMENSIONOTHERS
NOTE
PACKING
OVERCURRENT Note.4
OVERVOLTAGE
5V 12V 15V 24V 36V
6A 3A 2.4A 1.5A 1A
0~6A 0~3A 0~2.4A 0~1.5A 0~1A
30W 36W 36W 36W 36W
80mVp-p 120mVp-p
5.0%
120mVp-p 150mVp-p 150mVp-p
6.0%
1.0%
4.0%
500ms,20ms/230VAC5 atfullload00ms,20ms/115VAC
90~264VAC
47~63Hz
77% 85%
2.0%
85% 86% 86%
5.75~6.75V 13.8~16.2V 17.25~20.25V 27.6~32.4V 41.4~48.6V
1.1A/115VAC0.7A/230VAC
COLDSTAR30A/115VAC60A/230VAC
0.25mA /240VAC
110~150%ratedoutputpower
Protectiontype:Hiccupmode,recoversautomaticallyafterfaultconditionisremoved
CompliancetoEN55022(CISPR22)ClassB
Complianceto EN61000-3-2,-3
CompliancetoEN61000-4-2,3,4,5,6,8,11;ENV50204,EN55024,lightindustrylevel,criteria A
-30~+75 (Refertooutputloadderatingcurve)
20~90%RH non-condensing
-40~+80 ,10~95%RH
0.03%/ (0~50 )
10~500Hz,2G10min./1cycle,periodfor 60min.eachalongX, Y,Zaxes
DesignrefertoUL1310Class2,TUVEN60950-1,CAN/CSA C22.2No.223-M91,EN61347-2-13,IP66
743.5Khrsmin.MIL-HDBK-217F(25 )
148*40*30mm(L*W*H)
1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 of ambient temperature.
2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
3. Tolerance : includes set up tolerance, line regulation and load regulation.
4. Derating may be needed under low input voltage. Please check the derating curve for more details.
5. The power supply is considered a component which will be installed a final equipment. The final equipment must be re-confirmed that it still meets
EMC directives.
6. Length of set up time is measured at first cold start. Turning ON/OFF the power supply may lead to increase of the set up time.
0.34Kg;40pcs/14.6Kg/0.63CUFT
Protectiontype:Shutdowno/pvoltage,re-powerontorecover
35WSingleOutputSwitchingPowerSupply
Features :
LPV-35 ser i e s
RIPPLE&NOISE(max.) Note.2
VOLTAGETOLERANCE Note.3
ENVIRONMENT
EMICONDUCTION&RADIATION
SAFETY &
EMC
PROTECTION
50ms/230VAC16ms/115VACatfullload
WITHSTANDVOLTAGE
ISOLATIONRESISTANCE
I/P-O/P:3KVAC
I/P-O/P:>100MOhms/500VDC25 70%RH
FileName:LPV-35-SPEC2008-06-03
Constant voltage mode power supply
Universal AC input / Full range
Withstand 300VAC surge input for 5 seconds
Protections: Short circuit / Overload / Over voltage
Cooling by free air convection
100% full load burn-in test
Low cost, high reliability
Suitable for LED lighting and moving sign applications
2 years warranty
Fully isolated plastic case
MechanicalSpecification
FileName:LPV-35-SPEC2008-06-03
CaseNo.975A Unit:mm
fosc:65KHz
BlockDiagram
DETECTION
PWM
CIRCUIT
O.L.P.
EMIFILTER
RECTIFIERS
POWER
SWITCHING
FILTER
&
RECTIFIERS
+V
-V
I/P
CONTROL
&
O.V.P.
Others
5V
LOAD(%)
20
40
60
80
100
INPUTVOLTAGE(V)60Hz
90 100 125 135 145 155 165 175 180 200 230 264
100
90
80
70
60
50
40
LOAD(%)
DeratingCurve
LOAD(%)
Ta=25
DeratingCurve StaticCharacteristics
AMBIENTTEMPERATURE( )
LOAD(%)
175
LOAD(%)
35WSingleOutputSwitchingPowerSupply
LPV-35 ser i e s
AC/L(Brown)
AC/N(Blue)
+V(Red)
-V(Black)
16AWG
18AWG
600
3.6
3.6
148
3.5
3.5
3.5
3.5
40
600
30
(HORIZONTAL)
0 15 30
0 40 50-30 60 70 8075
  • Page 1 1
  • Page 2 2

Mean Well LPV-35-12 Datasheet

LPV-35-12
Mean Well
Brand
Mean Well
Model
LPV-35-12
Category
Power supply units
Type
Datasheet
This manual is also suitable for

Mean Well LPV-35-12 is a 35W single output switching power supply with universal AC input and a wide range of protections, making it suitable for various applications, including LED lighting and moving signs. It features constant voltage mode, withstands voltage surges, and provides short circuit, overload, and over voltage protections. The fully isolated plastic case and cooling by free air convection ensure safe and reliable operation. With a 2-year warranty, the LPV-35-12 offers a cost-effective and dependable power solution.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents