Bogen V35/60/100/ 150/250VMIX Datasheet

Bogen
Brand
Bogen
Model
V35/60/100/ 150/250VMIX
Category
Loudspeakers
Type
Datasheet

This manual is also suitable for

Bogen V35/60/100/ 150/250VMIX is a professional-grade mixer amplifier designed for a wide range of sound reinforcement applications, including background music and paging systems. With its compact size and versatile feature set, the VMIX is ideal for use in schools, offices, retail stores, and other commercial spaces.

The VMIX features multiple input channels, each with its own level control, allowing you to mix multiple audio sources together. These inputs can accommodate a variety of sources, including microphones, music players, and other audio devices. The mixer also includes a built-in music source, which can be used to play background music or announcements.

Bogen V35/60/100/ 150/250VMIX is a professional-grade mixer amplifier designed for a wide range of sound reinforcement applications, including background music and paging systems. With its compact size and versatile feature set, the VMIX is ideal for use in schools, offices, retail stores, and other commercial spaces.

The VMIX features multiple input channels, each with its own level control, allowing you to mix multiple audio sources together. These inputs can accommodate a variety of sources, including microphones, music players, and other audio devices. The mixer also includes a built-in music source, which can be used to play background music or announcements.

The Bogen VRS1 and VRS2 are vandal-resistant speak-
ers designed for hands-free two-way communications.
The VRS1 and VRS2 each consist of a 3-inch, weath-
er-resistant, cone-type speaker and a 25V trans-
former (tapped at 1/2 watt). The transformer can be
bypassed for 8-ohm operation. The speaker and
transformer are mounted on a #11-gauge stainless
steel faceplate. The speaker is protected from harm
by the faceplate, a baffle plate with stamped perfora-
tions, and a grille screen.
The VRS1 includes a heavy-duty metal push button
switch that protrudes slightly from the faceplate and
can be used to initiate a call to a control center. The
switch can be wired for use with systems that require
a momentary contact closure for call annunciation
(e.g., MULTICOM 2000), and includes a silicone-con-
trolled rectifier circuit for use with systems that
require “latching” operation (e.g., Multi-Graphic).
The VRS1 and VRS2 each have a 5-1/2" W x 7-3/4" H
faceplate and should be mounted to a 2-1/2" deep
dual-gang box (4-1/2" W x 6-13/16" H), such as the
Thomas & Betts Model H2BD-3/4 & 1 or equivalent.
Features
Description
Architect and
Engineer
Specifications
Vandal-Resistant
Speakers
Models VRS1 & VRS2
• Heavy-duty vandal-resistant and weather-resistant construction
• 8-ohm or 25V (1/2 watt) operation
• Call-in switch on VRS1 can be wired for “momentary” or “latching” operation
• One-way security hardware included
50 Spring Street, Ramsey, NJ 07446, U.S.A.
Tel: 201-934-8500; FAX: 201-934-9832; www.bogen.com
Specifications subject to change without notice.
© 1996 Bogen Communications, Inc.
Part No. 54-7817-02D 0902
The vandal-resistant speaker shall be a Bogen Model
[VRS1] [VRS2], or approved equivalent. It shall pro-
vide for hands-free, two-way communication. The
vandal-resistant speaker assembly shall consist of a 3-
inch, weather-resistant, cone-type speaker, and a 25V
line-matching transformer tapped at 1/2 watt. It shall
be possible to bypass the transformer when 8-ohm
operation is desired.
All components shall be mounted to a #11-gauge
stainless steel faceplate. The speaker shall be protect-
ed by the faceplate and by a baffle plate with stamped
perforations and a grille screen. The faceplate shall
measure 5-1/2" W x 7-3/4" H, and shall include
mounting holes corresponding to the location of
threaded holes on a 2-1/2" deep dual-gang box (4-1/2"
W x 6-13/16" H), such as the Thomas & Betts Model
H2BD-3/4 & 1 or equivalent.
(Use for VRS1) The speaker station shall include a
heavy-duty metal push-button type switch, which shall
be wired to provide for call-in to the control center.
It shall be possible to wire the switch for use with sys-
tems that require a momentary contact closure for
call annunciation. A silicone-controlled rectifier circuit
shall be included for use with systems that require
“latching” operation for call annunciation.
  • Page 1 1

Bogen V35/60/100/ 150/250VMIX Datasheet

Bogen
Brand
Bogen
Model
V35/60/100/ 150/250VMIX
Category
Loudspeakers
Type
Datasheet
This manual is also suitable for

Bogen V35/60/100/ 150/250VMIX is a professional-grade mixer amplifier designed for a wide range of sound reinforcement applications, including background music and paging systems. With its compact size and versatile feature set, the VMIX is ideal for use in schools, offices, retail stores, and other commercial spaces.

The VMIX features multiple input channels, each with its own level control, allowing you to mix multiple audio sources together. These inputs can accommodate a variety of sources, including microphones, music players, and other audio devices. The mixer also includes a built-in music source, which can be used to play background music or announcements.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents