Bush BR05DAB User manual

Category
Radios
Type
User manual

Bush BR05DAB is a digital radio that offers a range of features to enhance your listening experience. With its ability to receive DAB+ broadcasts, you can enjoy crystal-clear digital audio with no interference. The radio also features automatic station scanning, so you can easily find and save your favorite stations. Additionally, the Bush BR05DAB has a built-in speaker, headphone jack, and auxiliary input, making it versatile for use in various settings.

Bush BR05DAB is a digital radio that offers a range of features to enhance your listening experience. With its ability to receive DAB+ broadcasts, you can enjoy crystal-clear digital audio with no interference. The radio also features automatic station scanning, so you can easily find and save your favorite stations. Additionally, the Bush BR05DAB has a built-in speaker, headphone jack, and auxiliary input, making it versatile for use in various settings.

DAB+ DIGITAL RADIO
INSTRUCTION MANUAL
BR05DAB
The Gold Technical Support Line: 1902 215 259
www.bushaustralia.com.au
(Charges will apply at $2.95 per minute)
SELECT
MODE
SCAN
POWER
INFO
MENU
PRESET
BR05DABBLK
2
Introduction
Thank you for buying this Bush product, which is designed to give you many years of trouble-free
service.
You may already be familiar with using a similar unit, but please take time to read these instructions.
They are designed to familiarise you with the unit’s many features and to ensure you get the very best
from your purchase.
Safety is important
Your safety and the safety of others is important.
Please therefore, ensure you read the “Safety Instructions” before you operate this u
nit.
Warranty
In the unlikely event that your product fails to work normally, please call the below free phone number to
discuss the problem with one of our qualified service engineers.
Australia.
Bush Warranty: 1800 509 394
New Zealand
Bush Warranty: 0800 450 259
BR05DABBLK
3
Ensure that you read all of the safety instructions before using this unit.
Safety Considerations
Position the power cable and other connected cables so that they are not likely to
be walked on, pinched or where items can be placed on or against them.
Do not use the unit in humid or damp conditions.
Do not allow the unit to get wet.
Never allow children to insert foreign objects into holes or slots on the unit.
The ventilation should not be impeded by covering the openings with items such as
newspapers, tablecloths, curtains, etc. This may cause overheating.
No naked flame sources, such as lit candles, should be placed on the unit.
Do not expose the unit to dripping or splashing, and no objects filled with liquids,
such as vases, should be placed on the apparatus.
Do not place the unit in closed bookcases or racks without proper ventilation.
Cleaning
Disconnect the unit from the mains supply before cleaning.
Do not use any liquids or aerosol cleaners, as this may damage the unit. Use a
soft, dust free cloth.
Servicing
There are no user serviceable parts in the unit. When servicing, refer to qualified
service personnel.
Consult your dealer if you are ever in doubt about the installation / operation /
safety of the product.
Safety Instructions
BR05DABBLK
4
Contents
Introduction .................................................................................................... 2
Safety Instructions ..........................................................................................3
Contents..........................................................................................................4
Your DAB+ Radio.............................................................................................5
What is DAB+...................................................................................................6
Getting Started..............................................................................................7-8
Operating Instructions.................................................................................9-13
Warning/Troubleshooting/Specifications.........................................................14
Warranty........................................................................................................15
BR05DAB
5
Your DAB Radio
SELECT
MODE
SCAN
POWER INFO
MENU
PRESET
1 2 3
4
5
6
7
8
9
10
11
14
Top View
Front View
12
13
Side View
1. MODE
2. LCD DISPLAY
3. SELECT
4. MENU
5. PRESET
6. BUTTON
7. INFO
8. POWER
9. BUTTON
10. SCAN
11. SPEAKER
12. POWER INPUT
13. HEADPHONE OUTPUT
14. ANTENNA
BR05DAB
6
DAB was developed in Europe by a consortium of broadcasters and manufacturers
DAB uses digital compression techniques to transform the source material, i.e. music
and speech, into better quality audio.
Interference free reception
Analogue systems suffer from an effect called “multipath distortion”. This is caused
because waves do not behave in an orderly fashion, but bounce and reflect off
buildings etc. DAB+ sees this as an advantage and uses the direct and reflected signals
to actually reinforce the end result, allowing for better service more of the time.
No need to re-tune
A single DAB+ frequency can be used to cover the whole of the Australia, so solving
Scrolling Text
Broadcasters can transmit text to your radio. This way you can read the name of the DJ,
artist, song title or any other information they choose.
DAB+ Coverage
Check you local coverage at www.digitalradioplus.com.au
many of the problems experienced with the earlier analogue system DAB+ scan
automatically tune-in all of the available stations in your area.
What is DAB+
BR05DAB
7
Carefully remove your DAB+ Receiver from the box. We recommend you keep the packaging
for future reference.
Getting Started
Connect the Power Adapter to the your
wall outlet.
Extend the telescopic aerial for best
reception possible.
SELECT
MODE
SCAN
POWER INFO
MENU
PRESET
1. Press the Power Button to turn on the radio.
2. Press again to enter Standby mode.
3. Press and hold the Power Button to turn off the unit.
When you turn on the radio the unit will be in DAB+
Mode. It will begin to scan for available stations
automatically. The date and time will also be set from the
DAB+ broadcaster.
Welcome to
Digital Radio
Scanning...
SELECT
MODE
SCAN
POWER
INFO
MENU
PRESET
SELECT
MODE
SCAN
POWER INFO
MENU
PRESET
1. Connect the Power
.
2. Extend the Telescopic Aerial
3. Turning on the Radio
4. Welcome to your new DAB+ Mode
BR05DAB
8
Getting Started
5. Insert your Headphones
.
6. Installing the Batteries
7. Adjust the Volume
SELECT
MODE
SCAN
POWER INFO
MENU
PRESET
SELECT
MODE
SCAN
POWER
INFO
MENU
PRESET
OPEN
CLOSE
Insert 4 AA batteries matching with the
correct polarities.
Turn the Vol Button to adjust the volume.
9
BR05DAB
OPERATING INSTRUCTIONS
DAB+ OPERATION
Listening to the DAB+ Radio
Changing DAB+ Station
Storing a Station Preset
Recalling a Station Preset
Using the Menu in DAB+ Mode
1. Press the Mode to enter DAB+ mode.
2. You will need to conduct a full station scan to ensure all available stations are listed in the DAB+
station list for you to choose from and play.
3. When the scan is complete, the DAB+ Radio will then play the first available station/last played
station. Stations are listed in numerical and then alphabetic order. The station list is stored in
the memory. It is recommend to conduct a station scan every so often to pick up new stations.
If there are no stations found, check that you have adequate DAB+ coverage in your area.
1. Press the < and > Buttons to scroll through the stations in the station list.
2. Press the SELECT Button to confirm and play the station.
(Note: If no new station is selected, the current station playing will be displayed
after 15 seconds.)
3. If you wish to see any new stations added, press the SCAN Button to perform a full scan again.
You can preset up to 10 DAB+ stations for easy access as follows:
1. Select the station you wish to preset. Press and hold the PRESET Button until the display
shows:
2. Using the < and > Buttons choose the preset number (1-10) you wish to use. Then press the
SELECT Button to store the station.
1. Press the PRESET Button and use the < and > Buttons to select your desired preset station.
2. Press the SELECT Button to play the station.
Press the MENU Button to enter the Main Menu. Press the < and > Button to scroll through the
below options:
Auto Scan
1.Press the MENU Button to access the Main Menu.
2.Press the < and > Buttons until "Autoscan" is displayed.
3.Press the SELECT Button to perform full scan for all available DAB+ stations.
10
BR05DAB
OPERATING INSTRUCTIONS
You can also choose to manually scan for your favorite DAB+ station to obtain optimum reception.
1. Press the MENU Button to access the Main Menu.
2. Press the < and > Buttons until "Manual Tune" is displayed.
3. Press the SELECT Button to confirm.
4. Using the < and > Buttons to scroll through your desired frequency. Press the SELECT Button
to confirm and play.
Manual Tune
DRC (Dynamic Range Control)
Prune
Radio Info
DRC adds or removes a degree of compression to compensate for the differences in the
dynamic range between radio stations. This will balance out the sound volume.
There are 3 levels of compression:
1) DRC Off -- No compression applied
2) DRC High -- Maximum compression applied
3) DRC Low -- Low compression applied.
1. Press the MENU Button to access the Main Menu.
2. Press the < and > Button until "DRC" is displayed.
3. Press the SELECT Button to confirm.
4. Using the < and > Buttons to scroll through the desired DRC level and press the SELECT
Button to confirm.
Note: This is not available on many DAB stations.
To prune the DAB+ Station List, please follow the steps below. Pruning the station list will remove
any weak or unavailable stations.
1. Press the MENU Button to access the Main Menu.
2. Press the < and > Button until "Prune" is displayed.
3. Press the SELECT Button to confirm.
4. Using the < and > Buttons, select Yes or No to prune and then press the SELECT Button to confirm.
Press the INFO Button to view the various radio information provided by the broadcaster. The
information will be displayed on the second line. Press the INFO Button repeatedly to scroll through
the radio information provided by the broadcaster. Please refer to the diagram below - showing
the order of sequence. NOTE: Once you reach the last info option it will return to the first option.
NOTE: If no information provided by the broadcaster no information will be displayed.
11
BR05DAB
OPERATING INSTRUCTIONS
Automatic Tuning
Manual Tuning
Storing a Station Preset
Recalling a Station Preset
1. DLS (Dynamic Label Segment) - This is the scrolling message that
the broadcaster may include with their transmissions. This message
usually includes information, such as program detail, song title etc.
2. Signal Strength - This shows the signal transmission level.
3. Program Type - This is the type and description of the program
provided by the DAB+ station.
4. Ensemble Name - This will show the multiplex that is broadcasting
the program you are listening to.
5. Channel Frequency - This displays the channel number and the
transmission frequency.
6. Signal Error - If the transmission signal contains any errors, the
system will apply corrections. The amount of signal corrections
can be displayed as a numerical value between 0 and 99. As the
value increases, you will hear the signal degrade.To improve
reception, try adjusting the position of the antenna.
DLS scrolling text( )
Signal Strength
Program Type
Ensemble Name
Channel Frequency
Signal Error
Bitrate
Time
Date
7. Bitrate - This shows the signal bit-rate and the signal mode.
8/9. Time and Date: This shows the current time and date provided by the broadcaster.
Please Note: A signal error rate of 30 or more will make the station inaudible.
FM OPERATION
To switch from DAB+ to FM, press the Mode Button. FM Mode will then show up on the display.
1. Press the SCAN Button to auto search for the next available station.
2. If you find the reception is poor, use the Manual Tuning option below, to fine tune the station.
1. Press the < and > Buttons to manually scan through the frequency band.
2. The frequency will increases or decreases by 0.05MHz for each time you press < and > Buttons.
You can preset up to 10 FM stations for easy access as follows:
1. Tune to the station you wish to preset. Press and hold PRESET Button until the display shows:
2. Using the < and > Buttons, select the preset number from 1-10 you wish to use. Then press
the SELECT Button to store the station.
1. Press the PRESET Button and use the < and > Buttons to select your desired Preset.
2. Press the SELECT Button play that to play the Preset Station.
12
BR05DAB
OPERATING INSTRUCTIONS
Using the Menu in FM Mode
Scan Setting
Audio Setting
Radio Info
Press the MENU Button to enter the Menu mode. Press the < & > Button to scroll through the options
below:
1. Press the MENU Button to access to the Main Menu.
2. Press the < and > Button until "Scan Setting" is displayed.
3. Press the SELECT Button to confirm.
4. Then press the < and > Button to select either "All Stations" (Radio will scan for all Staions) or
"Strong Stations Only" (Radio will only scan for Strong Signal Stations), then press SELECT.
1. Press the MENU Button to access to the Main Menu.
2. Press the < and > Button until "Audio Setting" is displayed.
3. Then press the SELECT Button to confirm.
4. Press the < and > Button to select "Stereo or Allowed" or "Forced Mono".
5. To confirm, press the SELECT Button.
Press the INFO Button to view the various radio information provided by the station broadcaster. The
information will be displayed on the second line. Press the INFO Button repeatedly to scroll through
the information provided. Please refer to the diagram below - showing the order of sequence.
NOTE: Once you reach the last info setting the next press will return you to the first setting.
NOTE: If no information provided by the broadcaster no information will be displayed.
Program Type
Program Name
Audio Mode Stereo Mono( / )
Time
Date
Radio Text
1. Program Type - This is the type and description of
the program you are listening to and provided by the broadcaster.
2. Program Name - Is the name of the station you are listening to.
3. Audio Mode - This shows whether the current station is
broadcast in stereo or mono.
4. Time - This shows the current time provided by the broadcaster.
5. Date - This shows the current time provided by the broadcaster.
6. Radio Text - This the the RDS information provided by the
broadcaster. This is the scrolling text if provided.
13
BR05DAB
OPERATING INSTRUCTIONS
SYSTEM SETTING
ALARM OPERATION
The System Setting sub-menu allows you to set the radio features you desire.
1. Press the MENU Button to access the Main Menu.
2. Press the < and > Buttons until "System Setting" is displayed.
3. Push the SELECT Button to confirm. The following options will be displayed: Sleep, Alarm, Time,
Backlight, Factory Reset and Software (SW) are available.
Backlight: Press the < and > Buttons set the Backlight to time out from between 10 to 180 secs.
Factory Reset: Press the < and > Buttons to run a Factory Reset, which allows you to reset all settings.
Time: Press the < and > Buttons to set the Time Setting to 12 or 24 hour mode. Push the “SELECT”
Button to confirm. You can now manually set the time & date if you wish.
Sleep: Press the < and > Buttons to set the Sleep Time to 15, 30, 45, 60, 90 minutes or Sleep Off.
Alarm: Press the < and > Buttons to set the Alarm Settings. Instructions are provided below for
Alarm Operation.
To set Alarm 1 or Alarm 2 is simple when you follow the below steps.
1. Press the MENU Button to access the Main Menu.
2. Press the < and > Button until "Alarm" is displayed.
3. Push the SELECT Button to access the Alarm Menu and set the Alarm 1 and Alarm 2
4. Once in Alarm 1 or 2, press the < and > Buttons again to set the Alarm to on or off. Push the
SELECT Button to confirm.
5. Once On is selected you will need to set the On time. Press the < , > and Select Buttons to set.
6. When "On" is selected, press the < and > Buttons to set Alarm duration (15-90 mins). Press the
SELECT Button to confirm.
7. Next select the Alarm source (Buzzer, DAB+, FM). Press the < and > Buttons to set and press
the SELECT Button to confirm.
8.Then select the Alarm frequency (Daily, Once, Weekends, Weekdays). Press the < and > Buttons
to select and press the SELECT Button to confirm.
9. Now you will select the Alarm Volume. Turn the Volume Knob to select the Alarm Volume.
10. Press the SELECT Button again to confirm and the alarm is saved.
11. To disable the alarm, return to the Alarm Menu and press the < and > Button to select Alarm off.
12. When the alarm sounds, press the POWER button to silence.
NOTE: In standby, the alarm icon will be display when activated.
NOTE: When you set the Alarm to Once you will be required to set the date for the alarm to be activated.
14
BR05DAB
Warning / Troubleshooting / Technical Specification
All electrical and electronic products must not be disposed of with household
waste. Please refer to the retailer from whom you purchased this item for
disposal instructions.
Batteries and packaging materials can be recycled using your local collection
facilities.
Power Consumption................................................................................... 6W
Supply Voltage/Battery.............................................................................. 5 V (AA/UM3 x 4)
DAB+......................................................................................................... BAND III 174 -240 Mhz
FM.............................................................................................................. 87.5-108 Mhz
Sensitivity................................................................................................... -95dBm Typical
Headphone Ouput...................................................................................... 3.5mm Stereo Jack
Troubleshooting
If a fault occurs, first check the points listed below before taking the set for repair.
If you are unable to remedy a problem by following these hints, consult you retailer or service
center.
WARNING: Under no circumstances should you try to repair the set yourself, as this would
void your guarantee.
PROBLEM POSSIBLE REMEDY
No sound
Volume may not be adjusted
Headphones are connected
Power is not correctly
connected
Increase the Volume level
Disconnect your headphones
Check and connect the power
properly
The radio does not operate
when you press any buttons
Electrostatic discharge
Turn off the unit, disconnect
the main power, reconnect
after a 60 seconds
Radio
poor reception
Weak radio aerial signal
Interference caused by the
other
electrical equipment
(i
.e. TVs, VCR, Computer,
fluorescent lamps (TL) etc)
Extend and aim the aerial for
the best reception possible.
Keep the unit away from other
electrical
equipment where
possible
Technical Specification
Warranty
Please keep your receipt as proof of purchase. This product is warranted
for any defect in materials or workmanship for one year after the original
date of purchase. This product is for normal domestic and office use only.
This warranty does not cover damage from misuse or neglect, accidental
damage, vermin infestation, excessive voltages such us lightning or power
surges or any alternation that affects the performance or reliability of the
product.
In the unlikely event that your product fails to work normally, please
contact the Bush Warranty on 1800 509 394 (Australia) or 0800 450 259
(New Zealand) and have your receipt of purchase on hand.
This warranty is subject to the following provisions:
It is only valid within boundaries of the country of purchase
The product must be correctly assembled and operated in
accordance with the instructions contained in the manual
This product must be used solely for domestic purposes
The warranty does not cover accidental damage
The warranty will be rendered invalid if the product is resold or has
been damaged by inexpert repair
The manufacturer disclaims any liability for incidental or
consequential damaged
This warranty is in addition to, and does not diminish, your statutory
or legal rights.
PO BOX 6287
Silverwater NSW 1811
www.bushaustralia.com.au
Bush Warranty: 1800 509 394 Australia
Bush Warranty: 0800 450 259 New Zealand
PO BOX 6287
Silverwater NSW 1811
www.bushaustralia.com.au
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16

Bush BR05DAB User manual

Category
Radios
Type
User manual

Bush BR05DAB is a digital radio that offers a range of features to enhance your listening experience. With its ability to receive DAB+ broadcasts, you can enjoy crystal-clear digital audio with no interference. The radio also features automatic station scanning, so you can easily find and save your favorite stations. Additionally, the Bush BR05DAB has a built-in speaker, headphone jack, and auxiliary input, making it versatile for use in various settings.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI