AVIT Gear G3 Series User manual

Type
User manual

AVIT Gear G3 Series is an advanced wireless HDMI set that transmits high-definition video and audio to any HDTV display up to 30 meters away. It supports resolutions up to 1080p for the G3-1080 model and up to 2160P/30 for the G3-UHD model. Both models support 3DTV, CEC, and 7.1-channel lossless digital audio. The G3 series is designed for use in a single room with a clear line of sight between the transmitter and receiver. It features near-zero latency and a bandwidth of 7Gbps. The set includes a transmitter, receiver, and two micro USB to USB cables.

AVIT Gear G3 Series is an advanced wireless HDMI set that transmits high-definition video and audio to any HDTV display up to 30 meters away. It supports resolutions up to 1080p for the G3-1080 model and up to 2160P/30 for the G3-UHD model. Both models support 3DTV, CEC, and 7.1-channel lossless digital audio. The G3 series is designed for use in a single room with a clear line of sight between the transmitter and receiver. It features near-zero latency and a bandwidth of 7Gbps. The set includes a transmitter, receiver, and two micro USB to USB cables.

G3 series Wireless User Manual
www.avitgear.com
Please read the instruction carefully before connecting, operating or
adjusting the G3 series V1.3
This User Manual Applies to both models of AVIT Gear G3 series
The AVIT Gear Wireless HDMI Set include a Transmitter and Receiver, it
Transmits high definition video and audio to any HDTV display up to
30 meters
The G3-1080 supports resolutions up to 1080p/60 Full HD, 3DTV, CEC, and 7.1-channels
of High Bit Rate (HBR) lossless digital audio such as Dolby True HD, DTS -HD Master
Audio
The G3-UHD supports resolutions up to 2160P/30 (3840 x 2160P) Full HD, 3DTV, CEC, and
7.1-channels
of High Bit Rate (HBR) lossless digital audio such as Dolby True HD, DTS -HD Master
Audio
The G3 series Wireless kits are specifically designed to transmit within a room and not be used
beside another transmitting set
Best Practice For Operation
Placement of Transmitter is at source end, and receiver at Display
To ensure trouble-free operation, the device may only be used indoors, it is NOT
suitable for outdoor use
Always place the transmitter and receiver on a flat surface and ensure that the USB
cables and HDMI are not under voltage or near heat sources
The G3 is designed for use in a single room, for the best transmission performance
there should be a clear line of sight between transmitter and receiver (up to 30m) and
you should use a good Quality HDMI cable
Transmitter and receiver must not come in contact with liquids. This will void your
warranty
If you notice external damage to the equipment or unexpected or unusual operation,
the system should not be used. In these cases, disconnect the devices from power
We recommend turn off both devices when not in use, this can be achieved via CEC
presets on a display, or a power multiport device with pre-set command functionality
1
Features - Support for CEC Commands
Supports Video Resolutions:
G3-1080 480i/576i to 1080p@60Hz
G3-UHD Support resolution 480i@60Hz, 480p@60Hz, 576i@50Hz, 576p@50Hz,
720p@50/60Hz, 1080i@50/60Hz, 1080p@50/60Hz, 2K4K@24/25/30Hz,3840X2160UHD
3D video support 1080p/720p
Wireless HD 1.1 Compliant
Compliant with HDMI1.4, HDCP2.0
Supports Dolby TrueHD, DTS -HD Master Audio and LPCM digital audio streams
Up to 7.l channels
Uncompressed High Definition A/V from source to display
Near zero latency
Wireless extension of HDMI up to 30 meters
Bandwidth: 7Gbps
Intermediate frequency: 60GHz(59~66GHz)
Radio-frequency power: 10dBm
Security agreement: HDCP
With Your Package You Will Receive The Following Items
1 only Transmitter, 1 only receiver, 2 micro USB to USB cables
Note: You will require HDMI cables and USB – 230v Adaptors if you cannot use the USB of the
devices
Specifications:
Frequency Band Range: 60 GHz ( 59.40 Ghz -63.56 Ghz)
G3-1080 Input resolution (Transmitter): up to 1080P@60Hz
G3-1080 Output resolution (Receiver): up to 1080P@60Hz
G3-UHD Input resolution (Transmitter): up to 2160P@30Hz
G3-UHD Output resolution (Receiver): up to 2160P@30Hz
Input ports (Transmitter): lx HDMI (Female type)
Output ports (Receiver): lx HDMI (Female type)
USB Connector (Transmitter/ Receiver): Micro USB
Form factor (mm): 90(W) x 90(D) x 22 (H)
Weight (g): Transmitter (158g)
Receiver (153g)
Operating Temperature: 0°C — 40°C / 32°F — 104°F
Storage Temperature: -20°C — 60°C 1 -4°F — 140°F
Power Consumption (Max): 3.5W
Power Consumption Standby: 0,2W
2
Operation:
Blue Link LED: The connection status indicating lamp is blue on both Transmitter & Receiver
Blue LED OFF: Means the adapter is powered OFF or in Sleep mode
Blue LED Slow Blink: Means the adapter has started radio transmission and has not yet found
the other side of the link:
If the adapter is a transmitter, the adapter is in Scan mode, searching for a matching
receiver
If the adapter is a Receiver, the adapter is in Beacon mode, searching for a paired and
matching transmitter
This process can take a up to 2 minutes depending on placement and distance
between the transmitter & receiver
Blue LED Fast Blinking: Means the adapters are associated, which means that the receiver
and transmitter have accepted each other and established a WVLAN network
Blue LED ON: Means the transmitter and receiver adapters have established an audio/video
connection. At this point, the user should be able to see this transmission
happening on the display attached to the receiver
*If the blue LED on on both units and you are not viewing content from Source, make sure your
HDMI input is correct
*If you have video and no Audio, make sure the HDMI input on the display is selected correctly
as all HDMI inputs on a number of name brand Displays are not identical on performance and
specification
If you are unsure when connecting the devices, contact a specialist, your dealer
or AVIT Gear directly [email protected]
Compliance to Australian and New Zealand Standards
NZ RSM “Radio Spectrum Management” licence 265372 Classification as SRD device
Au & Registered ERAC E7275 & ACMA Class A1 Device
RCM
Thank you for your purchase of this product, if you have any questions relating to the product
please ask your local distributor or contact us directly and we will be happy to help you
Warranty 24 Months from date of Purchase
3
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4

AVIT Gear G3 Series User manual

Type
User manual

AVIT Gear G3 Series is an advanced wireless HDMI set that transmits high-definition video and audio to any HDTV display up to 30 meters away. It supports resolutions up to 1080p for the G3-1080 model and up to 2160P/30 for the G3-UHD model. Both models support 3DTV, CEC, and 7.1-channel lossless digital audio. The G3 series is designed for use in a single room with a clear line of sight between the transmitter and receiver. It features near-zero latency and a bandwidth of 7Gbps. The set includes a transmitter, receiver, and two micro USB to USB cables.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI