Page is loading ...
VIII. Drill may be needed for securing product to wall.
P.2
General Assembly Guidelines
I. Ensure that all parts and hardware are available before beginning assembly.
II. Follow each step carefully to ensure the proper assembly of this product.
21
III. Two people are recommended for ease in the assembly of this product.
IV. The three main types of hardware used to assemble this product are: wood
dowels, screws and bolts.
V. The provided glue is to secure wood dowels in place. When first inserting dowels,
locate the appropriate hole for the dowel, place a small amount of glue in the hole
and insert the dowel. Wipe away excess glue immediately.
In future assembly steps when dowels are necessary to attach assembly parts
together, place a small amount of glue on the end of the dowel before attaching
parts together. Wipe away excess glue immediately.
VI. A Phillips head screwdriver is required for the assembly of this product .
VII. Power tools should not be used to assemble this product.
Copyright
©
2019
b
y
Walker Edison Furniture Co., LLC. All rights reserved.
P.3
Parts List
2 x
Copyright
©
2019
b
y
Walker Edison Furniture Co., LLC. All rights reserved.
1
5
3
3
2
7
68
9
4
10
10
11 12
19
14
15
18
18 17
20
16
4
13 13
A
B
C
D
E
F
G
H
J
K
pcs
pcs
L
M
N
14 pcs
Wooden dowel
Ø8x30mm
Cam lock
Ø15x11mm
Ø6x35mm Cam bolt
15
15
pcs
pc
pcs
pc
1
Glue tube 1
Ø30mm 15
Sticker
M 4 Hex key
12
Hardware List
The hardware quantities listed above are required for proper assembly.
Some extra hardware may also have been included.
Philips head screwdriver required for assembly
(not included)
P.4
pcs
24
Bolt
Ø1/4"x12mm
Copyright
©
2019
b
y
Walker Edison Furniture Co., LLC. All rights reserved.
pcs
Hinge 3
pcs
20
Bolt
Ø1/4"x30mm
pcs
4
Flat head Bolt
Ø1/4"x25mm
pcs
8
Shelf support pin
P
pcs
2
Rubber Pad
pcs
8
Bolt
Ø6x50mm
Qpcs
4
Bolt
Ø1/4"x25mm
Screw
Ø4x12mm
P.5
Copyright
©
2019
b
y
Walker Edison Furniture Co., LLC. All rights reserved.
Step 1
A
A
AA
A
A
A
A
B
B
B
B
B
B
6
87
9
A
A
2
Insert wooden dowel (A) into parts (2,6,7,8,9), then using cam bolt (B) secure parts (6,8) with
Philips head screwdriver as per diagram.
P.6
Copyright
©
2019
b
y
Walker Edison Furniture Co., LLC. All rights reserved.
Step 2 21 3
C
C
7
8
Using cam lock (C) secure part (7) into part (8) with Philips head screwdriver.
Step 3
P.7
Copyright
©
2019
b
y
Walker Edison Furniture Co., LLC. All rights reserved.
21 3
C
C
8
9
Using cam lock (C) secure part (9) into part (8) with Philips head screwdriver.
Step 4
P.8
Copyright
©
2019
b
y
Walker Edison Furniture Co., LLC. All rights reserved.
21 3
C
CC
C
6
7
9
Using cam lock (C) secure part (6) into parts (7,9) with Philips head screwdriver.
P.9
Copyright
©
2019
b
y
Walker Edison Furniture Co., LLC. All rights reserved.
Step 5
M
M
G
M
G
M
M
N
N2
3
3
11
12
N
G
Using bolt (M) attach parts (3) into parts (11,12) ,use bolt (G) attach part (2) into parts(11,12)with
hex key (N) as per diagram.
P.10
Copyright
©
2019
b
y
Walker Edison Furniture Co., LLC. All rights reserved.
Step 6
G
G
GG
N
6
8
12
N
G
Using bolt (G) attach part (12) into parts (6,8) with hex key (N) .
P.11
Copyright
©
2019
b
y
Walker Edison Furniture Co., LLC. All rights reserved.
Step 7
B
B
B
B
1
B
B
B
Using cam bolt (B) secure part (1) with Philips head screwdriver.
P.12
Copyright
©
2019
b
y
Walker Edison Furniture Co., LLC. All rights reserved.
Step 8
E
E
E
F
F
F
F
F
E
5
Using screw (F) attach hinge (E) into part (5) with Philips head screwdriver as per diagram .
P.13
Copyright
©
2019
b
y
Walker Edison Furniture Co., LLC. All rights reserved.
Step 9
E
E
E
F
F
F
F
F
E
1
5
Using screw (F) attach hinge (E) into part (1) with Philips head screwdriver as per diagram .
P.14
Copyright
©
2019
b
y
Walker Edison Furniture Co., LLC. All rights reserved.
Step 10
13
13
J
J
KK
K
K
K
K
N
K
N
1
4
4
5
1
5
1
5
Attach rubber pad (J) on part (5) as the diagram .please keep the rubber (J) and part (4) in the
same line .In this way when you pull out the leaf support (4).it could be on the rubber pad (J).
Using part (13) cover part (4).then use bolt (K) secure part (13) to part (1) with hex key (N )as per
diagram.
P.15
Copyright
©
2019
b
y
Walker Edison Furniture Co., LLC. All rights reserved.
Step 11 21 3
C
CC
Q
QQ
N
1
6
8
11
C
CC
QQ
2
Using bolt (Q) secure part (1) into part (11,12) with hex key (N) , then using cam lock (C) secure
part (1) into parts (2,6,8) with Philips head screwdriver as per diagram.
P.16
Copyright
©
2019
b
y
Walker Edison Furniture Co., LLC. All rights reserved.
Step 12
D
D
D
Place sticker (D) cover the holes as per diagram.
P.17
Copyright
©
2019
b
y
Walker Edison Furniture Co., LLC. All rights reserved.
Step 13
H
H
HHH
HHH
6
810
10 10
Insert shelf support pins (H) into parts (6,8) ,make sure you place the four support pins (H) in the
same level so the shelf is not tilted .Then put part (10) into parts (6,8) as per diagram,tilt and rest the
adjustable shelves (10) onto the shelf support pins (H) .
P.18
Copyright
©
2019
b
y
Walker Edison Furniture Co., LLC. All rights reserved.
Step 14
4
413
13
Note : If you want to open the leaf ,please lift up the leaf as shown.
Hold it .then fully pull out the two leaf support and keep them on the rubber pad
If you want to close the leaf .please up the leaf slightly and hold it.push the two leaf supports
off .Then lay down the leaf slowly .
P.19
Copyright
©
2019
b
y
Walker Edison Furniture Co., LLC. All rights reserved.
Step 15 2 x
L
L
L
L
N
L
14
16
20
17
N
Using bolt (L) attach parts (14,16) to part (17,20) with hex key (N) as per diagram .
Do not fully tighten all the bolts .
P.20
Copyright
©
2019
b
y
Walker Edison Furniture Co., LLC. All rights reserved.
Step 16 2 x
K
N
KK
KK
18
18
14
16
Using bolt (K) attach part (18) to parts (14,16) with hex key (N) as per diagram .
Do not fully tighten all the bolts .
/
