2. PERFORMANCE ADVANTAGE COMPANY
  3. K5022

PERFORMANCE ADVANTAGE COMPANY K5022 Installation guide

  • Hello! I've reviewed the installation instructions for the PAC Cutter Kit model K5022. This document details how to mount the cutter kit using various hardware, including standard and PAC TRAC options. It also includes important safety guidelines and torque specifications. I'm ready to help with any questions you have about this document and the product.
  • What is the recommended torque when mounting to PAC TRAC aluminum products?
    What fasteners should be used for mounting?
    Are regular inspections recommended?
AMKUS CUTTER KIT P/N K5022 INSTALLATION INSTRUCTIONS
PERFORMANCE ADVANTAGE COMPANY 10-2013
CAUTION
To avoid the risk of personal injury, property damage or product damage, please use the included
fasteners for mounting.
* The bracket must be securely mounted to a stable surface and material.
* When mounting bracket to PAC TRAC aluminum products P/N 7000, P/N 7020, P/N 7040,
P/N 7050 with the included Trac Lok inserts P/N 7016, torque the screws to a maximum 15 in-lbs.
* PAC recommends regular and frequent inspections to be certain of proper operation and installation.
For additional assistance call 888-514-0083 between 8AM-5PM EST or email: [email protected]om
INS-K5022
www.pactoolmounts.com
P/N 2069LN
FIGURE 1
(Thru Mounting Method)
P/N 2031
P/N 2069LN
6-5/8”
17/64”
HOLES (2)
P/N 2038(2)
10”
17/64” DIA. (2)
ADJUSTAMOUNT ATTACHMENT
(See INS-1006 for more installation information)
STANDARD MTG. HARDWARE QTY
¼-20
Nylon Locking Nut
2
2
PAC Fastener Packet P/N 2035
P/N 2038
P/N 2069LN
¼-20 x 1
S.S. Hex Head Screw
STANDARD MTG. HARDWARE QTY
¼-20
Nylon Locking Nut
3
3
PAC Fastener Packet P/N 2033
P/N 2031
P/N 2069LN
¼-20 x 1
S.S. Flat Head Screw
1-1/2”
PERFORMANCE ADVANTAGE COMPANY 10-2013
CAUTION
To avoid the risk of personal injury, property damage or product damage, please use the included
fasteners for mounting.
* The bracket must be securely mounted to a stable surface and material.
* When mounting bracket to PAC TRAC aluminum products P/N 7000, P/N 7020, P/N 7040,
P/N 7050 with the included Trac Lok inserts P/N 7016, torque the screws to a maximum 15 in-lbs.
* PAC recommends regular and frequent inspections to be certain of proper operation and installation.
FIGURE 2
(PAC TRAC Mounting)
For additional assistance call 888-514-0083 between 8AM-5PM EST or email: [email protected]om
INS-K5022
www.pactoolmounts.com
AMKUS CUTTER KIT P/N K5022 INSTALLATION INSTRUCTIONS
P/N 7016 (2)
P/N 2049 (2)
ADJUSTAMOUNT ATTACHMENT
(See INS-1006 for more installation information)
P/N 7016
P/N 2044
MTG. HARDWARE for PAC TRAC QTY
Trac Lok Insert
2
2
PAC Fastener Packet P/N 7029
P/N 2049
P/N 7016
#10-24 x 3/4
S.S. Pan Head Screw
MTG. HARDWARE for PAC TRAC QTY
Trac Lok Insert
3
3
P/N 2044
P/N 7016
#10-24 x 1
S.S. Flat Head Screw
P/N 2054
PAC Fastener Packet P/N 7026
P/N 2054
#10 S.S. Washer 3
/