2. morse
  3. 195A-1-220-50

morse 195A-1-220-50 User manual

  • Hello! I've reviewed the Declaration of Conformity for the MORSE Power-Tilt Kontrol-Karriers 195 Series 50Hz. This document confirms compliance with several European directives related to electromagnetic compatibility, low voltage, and machinery safety. I'm ready to answer any questions you might have about the product specifications or the standards it adheres to.
  • What is the product type described in this document?
    What directives does this product comply with?
    What is the manufacturer's address?
    What is the model of the product?
    What is the minimum serial number covered by this certificate?
Copyright 2022 - Morse Mfg. Co., Inc. Form DC195-50 (Updated 2 Sep., 2022) 1
The Specialist In Drum Handling Equipment
CE Declaration of Conformity
50Hz 195 Series Power-Tilt Kontrol-Karriers
[email protected] 103 Kuhn Rd.
Syracuse, NY, 13208 U.S.A.
morsedrum.com (315) 437-8475
CE Declaration of Conformity
This product has been tested to the current appropriate standards
and is in compliance with the following
-------------------------------------------------------------------
EMC Directive: 2014/30/EU
Generic Emissions Standard: EN 61000-6-4:2007
Product Specic Emissions: EN 55011 Class A
Generic Immunity Standard: EN 61000-6-2: 2005
Immunity: EN 61000-4-2 Electrostatic Discharge
EN 61000-4-6 Conducted Susceptibility
Low Voltage Directive: 2014/35/EU
Standard: EN 60204-1 Safety of Machinery
Machinery Directive: 2006/42/EC
Standard: EN 60204 Safety of Machinery
-------------------------------------------------------------------
Manufacturer’s Name: MORSE Mfg. Co., Inc.
Manufacturer’s Address: 103 Kuhn Rd.
Syracuse, NY 13208
Product: Power-Tilt Kontrol-Karriers
Model: 50Hz 195 Series
Serial Number: 400000 and up
-------------------------------------------------------------------
This Certicate of Compliance issued 2022 is valid for the test sample of the product specied
above and that it conforms to the Directive(s) and Standard(s).
Signature:
Nathan Andrews
President
Morse Manufacturing Company, Inc.
103 Kuhn Rd.
Syracuse, New York, USA 13208
Phone: (315)-437-8475
Fax: (315)-437-1029
/