2. Baxton Studio
  3. RH330C-Grey/Walnut-DC-7PC Dining Set

Baxton Studio RH330C-Grey/Walnut-DC-7PC Dining Set, RH330C-Grey/Dark Brown-7PC Dining Set, RH330C-Sand/Dark Brown-7PC Dining Set Assembly Instructions

  • Hello, I'm a chat assistant and I've reviewed the assembly instructions for the 7008T chair. This document provides a detailed guide on assembling the chair, including a list of parts and hardware, as well as visual step-by-step instructions. I'm ready to answer any questions you may have about the assembly process.
  • What should I do before starting assembly?
    When should I fully tighten the nuts or bolts?
    What should I avoid when tightening?
ASSEMBLY INSTRUCTIONS
MODEL : 7008T
Read this instruction carefully, remove all wrapping material, staples and straps from the carton. See hardware and furniture part list.
For guidance. Be sure you have all wooden furniture parts on a clean and soft surface to prevent from being scratched. Follow the figure to
start assembling.
Caution:
1. Do not FULLY –TIGHTEN the nut or bolt until all nut or nut bolt is ready to assembled.
2. Do not OVER- TIGHTEN the nut or nut bolt to avoid causing damages to the thread.
3. Keep all hardware part out of reach of children.
PART LIST
No.
B
A
DESCRIPTION
TABLE TOP
TABLE LEG
QTY
1 PC
4 PCS
No.
4
3
2
1
STEP 1
HARDWARE LIST
DESCRIPTION
FLAT WASHER 6/19"
SPRING WASHER 6/13"
JCBC SCREW M6 X 70MM
M4 ALLEN KEY
QTY
8 PCS
8 PCS
8 PCS
1 PC
STEP 2
COMPLETED TABLE ASSEMBLY
/