2. Article
  3. SKU18599

Article SKU18599 Assembly Instructions

  • I've reviewed the Assembly Instructions for the ARTICLE LISSOM Multi-Bulb Floor Lamp. This document provides step-by-step guidance for assembling the three-bulb lamp, which uses E26 4W LED A19 bulbs, and includes assembly tools. I'm here to help you with any questions about this lamp or the assembly process.
  • What type of bulbs does the lamp use?
    How long does the assembly take?
    What tools are required for assembly?
Assembly Instructions
LISSOM
Multi-Bulb Floor Lamp
VERSION 1.0
ASSEMBLY INSTRUCTIONS
Read these instructions carefully and keep for future
reference. Refer to parts inventory for guidance, and
ensure you have all pieces before starting.
When assembling, place all parts on a soft, clean, and flat
surface such as a carpet to prevent scratches.
If you’re having diculty, our friendly Customer Care
team is always here to help. Call us at 1.888.746.3455
during business hours, email [email protected] or chat
live at article.com.
LISSOM Multi-Bulb Floor Lamp Page 2 of 4
15 min
2
PARTS INVENTORY
ID DESCRIPTION QTY
LAMP TOP SEGMENT 1
FRONT ROD LOWER SEGMENT 2
BACK ROD LOWER SEGMENT 1
BASE 1
2MM ALLEN KEY 1
SET SCREW
2 PIECES PREINSTALLED + 1 SPARE
2 + 1
FLAT WASHER 1
PARTS INVENTORY CONT.
ID DESCRIPTION QTY
SCREW 3
4MM ALLEN KEY 1
WAVE WASHER 1
FLAT WASHER 1
LOCK WASHER 1
SCREW NUT 1
SOCKET WRENCH 1
BULB E26 4W LED A19 3
TIME # OF PEOPLE DIFFICULTY
Page 3 of 4
12
3B3A
Pull out cord as
far as possible.
!
Align notch on lamp top segment (A) with holes on back
rod of lower segment (C) and attach with set screws (F).
!
Unscrew set screws (F) from back rod of lower
segment (C) before attaching lamp top segment (A).
!
×2
LISSOM Multi-Bulb Floor Lamp
Page 4 of 4
54
6
×3
LISSOM Multi-Bulb Floor Lamp
The pin should be aligned with the
cable direction.
!
/