A. ATTACH TABLE LEG SUPPORT TUBE (C) TO TABLE LEG (B)
USING FLAT WASHER AND BOLT (E).
B. AT THIS TIME, TIGHTEN ALL BOLTS COMPLETELY.
A. PLACE TABLE TOP (A) UPSIDE DOWN ON A FLAT,
PROTECTED SURFACE.
B. ATTACH TABLE LEGS (B) TO TABLE TOP (A) USING FLAT
WASHER AND BOLT (E). LOOSELY TIGHTEN WITH ALLEN
WRENCH (F).
RIDGE CREST FARMHOUSE FAUX WOOD A FRAME METAL DINING TABLE ASSEMBLY INSTRUCTIONS
(CONT.)
A. .ROTATE TABLE TO UPRIGHT POSITION.
B. PLACE UMBRELLA HOLE CAP (D) ON TABLE TOP (A).
Page 2/3