Hi Sharp 4IN1-D073AA Operating instructions

HD Analogue Camera_ Manual

2

Contents

SAFETY PRECAUTIONS ............................................................. 3

Specification ................................................................................. 4

Product contents ......................................................................... 5

Product overview ........................................................................ 6

Dimension ...................................................................................... 7

COC (control over coaxial) function .................................... 8

OSD Menu ...................................................................................... 9

Connection ................................................................................. 14

3

SAFETY PRECAUTIONS

Please read before using

The lightning flash with arrowhead symbol, within an equilateral

triangle, is intended to alert the user to the presence of insulated dangerous

Voltage within the product’s enclosure that may be sufficient magnitude to

constitute risk of electrical shock to persons.

The exclamation point within an equilateral triangle is intended to alert

the user to the presence of important operation and maintenance (servicing)

instructions in the literature accompanying the appliance.

1. Please read the service manual in details before using.

2. Don't try to disassemble the chassis or the part easily, in case that touch the

power by mistake, is shocked by electricity the danger or caused inside parts

to be damaged.

3. Do not attempt to service this unit yourself unless you are authorized to do

so. Opening cover may exposure you to dangerous voltage or other hazards.

Refer all servicing to qualified personnel only.

4. When being regular, please lock the parts firmly first to prevent the machine

damage.

5. Please connect correctly in accordance with the regulation, prevent the

machine from using, or striking improperly.

6. Please don't use any organic solution or the corrosively sanitizer to insert

and wipe away the chassis outside. While inserting and wiping away, please

turn off the power, and use the clean cloth is stained with letting a small

amount of branch water, insert and wipe away appearance.

7. The contents of this manual are subject to change without notice.

4

Specification

Image unit

1/2.9” SONY CMOS : 2.0 Mega

Resolution

1920(H) x 1080(V)

Video Output

AHD / CVI / TVI / CVBS

Synchronization

Internal

Scanning System

2:1 interlace

S/N Ratio

More than 60 dB ( AGC OFF)

Electronic Shutter

Auto 1/60 (1/50) ~ 1/50,000 sec

Min. Illumination

0.01Lux ( F1.4 , AGC ON)

Lens Type

Board Lens: 3.6 mm / 6 mm

Coxial Cable Transmition

Distance(3C/5C)

300 M / 500 M

Twisted Cable Transmition

Distance (Cat5e standard)

200 M

Power Source

DC 12 V ± 10% / 1 A

Adaptor

Optional

Operating Temperature

-10 ℃ ~ 50 ℃ (14 ℉ ~ 122 ℉ )

Storage Temperature

-20 ℃ ~ 60 ℃ (-4 ℉ ~ 140 ℉)

Please use suitable adapters DC12V ± 10%≧1A . Otherwise, this product will be damaged.

5

Product contents

Item

Figure

Trapping Screws × 2

Anchor × 2

6

Product overview

Item

Description

①

Camera

②

BNC cable

③

Power cable (DC 12 V± 10%)

7

Dimension

Unit : mm

8

COC (control over coaxial) function

① Enable the channel which you want to configure, and choose COC

(control over coaxial) function under PTZ Protocol page.

② Click the right button of the mouse, choose PTZ Control.

③ Click ” Iris + “ to open OSD menu.

※Notice : When you are inside the camera OSD, if there is suddenly power

shortage, the setting will not be saved in the memory. You must exit the OSD

or wait the OSD disappears to validate the modified setting in the memory.

Icon

Description

Open the OSD menu of camera / Enter

Adjustment parameter options

Direction button, in order to choose the

item that you want to config.

9

OSD Menu

Notice : ”(xxx)”means (default value)

LENS

MANUAL (Default)

DC

MODE

OUTDOOR

(DEFAULT)

MIN SHU

1/30

MAX SHU

(1/2000),1/5000,1/10000,1/50000,

1/60,FLK,1/240,1/480,1/1000

RETURN

INDOOR

IRIS SPEED

0~15(8)

RETURN

RET,SAVE&END

EXPOSURE

SHUTTER

1/30,1/60,FLK,1/240,1/480,1/1000,1/2000,1/5000,1/10000,1/50

000,X2,X4,X6,X8,X10,X15,X20,X25,X30,AUTO (AUTO)

AGC

0-15 (13)

SENS-UP

OFF

AUTO

(Default)

SENS-UP

X2,X4,X6,X8,X10,X15,X20,X25,

X30,(X2)

RETURN

RET,SAVE & END

BRIGHTNESS

1-100 (50)

D-WDR

OFF

ON

LEVEL

0-8 (5)

RETURN

RET,SAVE & END

AUTO (Default)

DEFOG

OFF (Default)

AUTO

POS/SIZE

POSITION, SIZE,RET,AGAIN

GRADATION

0-2 (0)

DEFAULT



RETURN

RET,SAVE & END

RETURN

RET,SAVE & END

BACK

LIGHT

OFF (Default)

BLC

LEVEL

MIDDLE、HIGH、LOW (MIDDLE)

AREA

POSITION, SIZE,RET,AGAIN

DEFAULT



RETURN

RET,SAVE & END

HSBLC

SELECT

AREA1,AREA2,AREA3,AREA4 (AREA1)

DISPLAY

OFF

ON (Default)

POSITION, SIZE,RET,AGAIN

10

BLACK MASK

ON, OFF (ON)

LEVEL

0-100 (20)

MODE

ALL DAY

NIGHT

(Default)

AGC

LEVEL

0-255 (48)

RETURN

RET,SAVE & END

DEFAULT



RETURN

RET,SAVE & END

WHITE BAL

ATW (Default)

AWC →SET

INDOOR

OUTDOOR

MANUAL

BLUE

0-100 (63)

RED

0-100 (43)

RETURN

RET,SAVE & END

AWB

DAY＆

NIGHT

AUTO

D →N(AGC)

1-255 (168)

D →N(DELAY)

0-60 (5)

N →D(AGC)

1-255 (80)

N →D(DELAY)

0-60 (5)

RETURN

RET,SAVE & END

COLOR

B/W

BURST

ON, OFF (OFF)

IR SMART

OFF(Default)

ON

LEVEL

0-15 (3)

AREA

POSITION,

SIZE,RET,AGAIN

RETURN

RET,SAVE & END

RETURN

RET,SAVE & END

EXT (Default)

D →N(DELAY)

3-60 (3)

N →D(DELAY)

3-60 (3)

RETURN

RET,SAVE & END

NR

2DNR

OFF,MIDDLE、HIGH、LOW (LOW)

3DNR

OFF,MIDDLE、HIGH、LOW (LOW)

RETURN

RET,SAVE & END

SPECIAL

CAM TITLE

OFF (Default)

ON

0123456789

ABCDEFGHIJK

11

LMNOPQRSTUV

WXYZ▲→←↑↓( )

¯-_■/=&:~,.

←→ CLR POS END

D-EFFECT

FREEZE

OFF,ON (OFF)

MIRROR

OFF,MIRROR,V-FLIP,ROTATE (OFF)

NEG.IMAGE

OFF,ON (OFF)

RETURN

RET,SAVE & END

MOTION

OFF (Default)

ON

SELECT

AREA1,AREA2,AREA3,AREA4

(AREA1)

DISPLAY

ON

(Default)

POSITION,

SIZE,RET,AGAIN

OFF

SENSITIVITY

0-100 (64)

COLOR

GREEN,BLUE,WHITE,RED

(GREEN)

TRANS

0.00/1.00/0.75/0.25 (1.00)

ALARM

VIEW

TYPE

ALL,OFF, BLOCK,

OUTLINE (ALL)

OSD

VIEW

OFF,ON (ON)

ALARM

OUT

OFF,ON (ON)

TIME

1-15 (3)

RETURN

RET,SAVE & END

DEFAULT



RETURN

RET,SAVE & END

PRIVACY

OFF (Default)

ON

SELECT

AREA1,AREA2,AREA3,AREA4

(AREA1)

DISPLAY

OFF

MOSAIC

POSITION,

SIZE,RET,AGAIN

INV.

POSITION,

SIZE,RET,AGAIN

COLOR

(Default)

POSITION,

SIZE,RET,AGAIN

COLOR

WHITE,USER,BLACK,RED,

12

BLUE,YELLOW,GREEN,CYAN

(WHITE)

TRANS

1.00/0.25/0.50/0.75 (1.00)

DEFAULT



RETURN

RET,SAVE & END

LANGUAGE

HEB,ARB,ENG,CHN1,CHN2,GER,FRA,ITA,SPA,POL,RUS,POR,

NED,TUR,KOR, JPN (ENG)

DEFECT

LIVE DPC

OFF

ON (Default)

AGC

LEVEL

0-255 (70)

LEVEL

0-100 (50)

RETURN

RET,SAVE & END

WHITE DPC

OFF

ON (Default)

POS/SIZE

POSITION,

SIZE,RET,AGAIN

START

CLOSE THE IRIS

THEN

PRESS ENTER

DPC VIEW

ON, OFF (OFF)

LEVEL

0-60 (15)

AGC

0-14 (14)

SENS-UP

X2,X4,X6,X8,X10,

X15,X20,X25,X30

(X8)

RETURN

RET,SAVE & END

BLACK DPC

OFF (Default)

ON

POS/SIZE

POSITION,

SIZE,RET,AGAIN

START

PRESS ENTER

DPC VIEW

ON, OFF (OFF)

LEVEL

0-100 (100)

RETURN

RET,SAVE & END

RETURN

RET,SAVE & END

RS485

CAM ID

0-255 (0)

ID DISPLAY

ON, OFF (OFF)

BAUDRATE

2400,4800,9600,19200,38400 (38400)

RETURN

RET,SAVE & END

13

RETURN

RET,SAVE & END

ADJUST

SHARPNESS

OFF

AUTO

(Default)

LEVEL

0-10 (6)

START AGC

0~255 (70)

END AGC

0~255 (200)

RETURN

RET,SAVE & END

MONITOR

LCD (Default)

GAMMA

USER ,0.45,0.50,0.55,0.60,0.65,

0.70,0.75,0.80,0.85,0.90,0.95,

1.00 (USER)

BLUE GAIN

0~100 (50)

RED GAIN

0~100 (50)

RETURN

RET,SAVE & END

CRT

BLUE GAIN

0~100 (50)

RED GAIN

0~100 (50)

RETURN

RET,SAVE & END

LSD

ON, OFF (ON)

VIDEO. OUT

NTSC,PAL

RETURN

RET,SAVE & END

EXIT

SAVE & END,NOT SAVE,RESET（SAVE & END）

14

Connection

Step 1.

Turn clockwise to lock.

Step 2.

Make sure the connection is

tightened.

Step 3.

Connect BNC cable and

power cable.

※NOTICE : If necessary, please install 2 anchors before the

first step.

BNC cable

Power cable

85-AAD073-A502G-A

Hi Sharp 4IN1-D073AA Operating instructions

Hi Sharp 4IN1-D073AA Operating instructions

Related papers

Other documents