1
Quick Start Guide Sonic–Fusion® Modes
GETTING STARTED BRUSH
Place toothbrush into charging base.
Attach °ossing brush head. Brush
Press BRUSH button, use light pressure and
Tip: For the best experience and clean all tooth surfaces.
Floss
optimal battery performance, CLICK
keep the toothbrush stored in the
charger base when not in use.
CHARGING BASE
FLOSS
2 PRIMING UNIT (FIRST TIME USE ONLY)
Fill reservoir with warm water and Brush
replace it ÿrmly on the base.
Press FLOSS button and adjust water pressure to
Point tip into sink. Press FLOSS button. FILL
Floss
desired setting. Keep lips partially closed to allow
Rotate pressure knob repeatedly between ROTATE water to °ow into sink.
high and low until water °ows.
REPLACE FLOSS
Note: If Floss mode does not turn on,
please contact us.
BRUSH + FLOSS
Brush
3 NEED HELP?
Press BRUSH button, then press FLOSS button. Floss
Visit Waterpik.com/WelcomeSF
To watch a How To Video and ÿnd additional product support
Call Us! 1-800-525-2774