1
Quick Start Guide Sonic–Fusion® 2.0 Modes
GETTING STARTED
BRUSH
Brush
Place toothbrush into charging base.
Press BRUSH button, use light pressure and
Attach COMPACT or FULL size °ossing
clean all tooth surfaces.
Floss
brush head.
CLICK
Tip: For the best experience and
Speed
optimal battery performance,
COMPACT FULL
If you wish to change to a different speed, you can do
Speed
Floss
SIZE SIZE
so by pressing the Speed button while brushing.
2
PRIMING UNIT (FIRST TIME USE ONLY)
High: 2 LED's ON
Speed
Low: 1 LED ON
Fill reservoir with warm water and
replace it ÿrmly on the base.
Point tip into sink. Press FLOSS button.
FILL
FLOSS
Rotate pressure knob repeatedly between
ROTATE
keep the toothbrush stored in the
BRUSH SPEEDS
charger base when not in use.
CHARGING BASE
high and low until water °ows.
Brush
REPLACE
Press FLOSS button and adjust water pressure to
FLOSS
Floss
desired setting. Keep lips partially closed to allow
Note: If Floss mode does not turn on,
water to °ow into sink.
please contact us.
Speed
BRUSH + FLOSS
Brush
3
NEED HELP?
Press BRUSH button, then press FLOSS button.
Floss
Visit Waterpik.com/WelcomeSF
To watch a How To Video and ÿnd additional product support.
Speed
Call Us! 1-800-525-2774