Vapour Room Innokin AIO Pack IK-1200 User manual

ROOM

This unit has been delivered to us without any instructions, so we’ve put this together as a quick guide

until we can get hold of some, although the unit is pretty straightforward to use.

Innokin AIO (All In One) Pack IK-1200 E-Cigarette

LED panel view:

[LED view]

The USB cable to charge the unit itself has the smaller jack plug and is the only one of the two

that will fit the charging port.

Bottom panel view:

LED panel

Turn the unit on and the LED’s go through a startup sequence.

The PCC (Personal Charging Unit) LED displays the status of the main battery - Green is fully charged, red is

almost depleted and amber is somewhere in the middle.

The EC (E-Cigarette) LED will show red if it’s charging a 510 e-cigarrette. It will go out when the e-cig is

fully charged. Most 510 batteries can be charged, as well as the one provided of course.

The POWER button simply lights to show that the unit has been switched on, but then will go out shortly

afterwards.

On the bottom panel, selecting the DISPLAY button will show the status of the main battery via the PCC

LED.

INPUT:

Plug in the USB charging lead that fits this port and the main battery can be recharged

OUTPUT:

The mini USB connection in conjunction with the multi-port adapter can be used to charge other devices

Charging

Remove the plug from the end of the yellow cartomiser and add a few drops of your chosen e-liquid

before replacing the plug.

Filling

The e-cigarette battery is automatic, so simply inhaling on the cartomiser will generate the vapour.

Happy Vaping!

Attach the cartomiser to the e-cigarette battery.