OneConcept Carguard 3D HDX User manual

OneConcept
Brand
OneConcept
Model
Carguard 3D HDX
Category
Drive recorders
Type
User manual
oneConcept Carguard 3D HDX
User
Manual
Appearance and Functional Description
1, HDMI interface, 2, speaker, 3, LCD display, 4, UP key (MIC key to open), 5, DOWN key (emergency key), 6, menu key, 7,
mode button, 8, indicator light (green light charging indicator, red light status indicator)9, microphone, 10 video and camera
button (OK button), 11 bracket, 12, GPS interface, 13 USB interface, 14, lens 15, the reset button sole, 16, TF card slot 17,
Power key
Battery capacity
Full Middle Low
Charge Battery
1. Directly to the car charger connected camera USB interface, the camera is automatically turned on and charging, charging,
charging indicator light go out after full.
2. USB charging, USB data cable is connected to the computer and the other end connected to one end of the camera, charging,
charging indicator light turns off after full.
Installation and Removal of TF Card
1. In the direction as indicated, insert the TFcard into the slot until it is held firmly.
2. To take the TFcard out, slightly press the TFcard to eject it out.
Note:
1. Observe the direction to insert the TFcard; if the direction is reverse, the device and the TFcard may be damaged.
2. When the TFcard is inserted into the device, the machine will set the TFcard as preset storage unit and the data in the original
TFcard will be unreadable.
3. If the TFcard is incompatible with the device, please insert the card again or replace it for retry.
4. Max. 32G supported.
Use Guidelines
Battery cover
DVR On/Off
1. hold the power key to open a will to boot , shut down for 3 seconds .
2. Insert the device into the car charger to automatically switch on and turn off the card charger to automatically switch it off.
How Photography and Photography options set
1 , Photography
This machine an external GPS module, where you can record traffic in real time Video camera into camera mode, the
upper-left corner of the screen , Flag, press the OK key to start the video, left corner of the screen while recording
Sign flashing, both white GPS icon , GPS is no signal, when the icon turns green ,, GPS signals properly. And then
press video camera stopped recording, at the left corner and disappear.
2.Set Video Options
Press the Menu key to enter the setup of video options.
Resolution: FHD（1080P）/HD（720P）
No-interval circular video: OFF/1min/3min/5min.
Date of the postmark: on / off
Motion Detection: On/Off.
How to Enter System Setup Option
In video or image mode, press the Menu key once and then the UP/DOWN key to enter the “System Setup” option:
* G-Sensor :ON/OFF.
* File Type: Emergency video, circular video and image.
* Sound effect: Video with/without sound, buzzer on/off and sound adjustment.
* Power Save : OFF/10 sec /30sec
* Date&Time: Date and time adjustment.
* Language: Choose the desired language from various languages.
* Light Freq :ON/OFF.
* TV out : PAL/NTSC
* Format: Yes/No
*. System: Factory Reset/System infon/Card info
* Delay off : On / Off
Take and Set Photos
1. Press the On/Off key to enter the video mode; press the Mode key to enter the image mode indicated with the icon
on the left upper corner of the screen.
2. press the video camera button, click preview, there for about a second, after finish when taking pictures, photos, catch the
camera so as not to shake, so as not to affect the image quality.
Resolution:12M/10M/8M/5M/2M
Tip:
1. In any of the modes of video and image, you may press the Mode key to switch such modes circularly.
Playback Mode
1. Browse Files
When the camera completes the boot process and enter the camera mode, press the mode button 2 times enter the replay mode,
press the UP/DOWN key to browse the images and videos. In replay mode, you may browse the files by categories only; if the
file type is video, you can only browse videos; if image, you may browse images.
2. Delete and Protect
In replay mode, press the menu key to have the options Delete and Protection lock. Press the OK key to enter the options
“Delete the present” and “Delete all”, press the OK to enter and again to confirm. You may add a lock to the file; before
unlocking, you cannot delete it; in such way, some important files are protected.
Side charging side video mode
The car is fully connected to the USB port of the machine, the boot mode that can enter the video while charging.
Data Backup
USB Backup Mode
The line USB camera and computer connections, this time the machine automatic starting, and automatically enter MSDC mode,
open the computer desktop " my computer " appeared in a removable disk, removable disk file type are respectively arranged
corresponding to the file.
Remarks:
1. PC operation system: Windows 2000/XP/Vista/Windows 7, MAC OSX 10.3.6 or above.
2. Remove the USB cable to turn off the DVR.
PCCAM PC camera
This machine can be used as a PC camera, camera connected to the computer using a USB cable, a pop-up MSDC/PCCAM
select, press the arrow keys to move the selection to PCCAM press video button to confirm and then after, open my computer,
there will be Double-click this icon can be used when the PC camera.
Computer playback
USB cable connect the camera and computer, machine start automatically, select the enter the MSDC mode, open the
desktop "my computer" a removable disk appears, use dedicated AP player To play, double-click the
CarDVR.exe to open play page
Click the icon to open, select the file you want to play, and add the file to the AP playlist
Select the playlist you want to play the file, click on the Play the selected file, and map to the right shows your real time
position in the driving process
onnect HDMI play
1 for the HDMI connector you can connect high-quality TV playback
Tip: do not need to install the driver.
Note: when using this product caused by improper operation when the machine, you can press the reset button and power on
again, the machine is able to return to normal.
Technical Specifications
LCD size
1.5″ 480*240 LCD
Lens
125°A+ class high-resolution super wide angle
Language for options
English//Russian
Video size
1080P/720P
Video format
H.264 AVI/MOV
Photo resolution
12M/10M/8M/5M/2M
Photo format
JPG
memory card
TF
Microphone/Speaker
Inbuilt
Light source frequency
50Hz/60Hz
TV output
NTSC/PAL
USB port
USB2.0
Power supply port
5V 1A
Battery
Use 3.7V Lithium battery
Operation system
Windows 2000/XP/Vista/Windows 7,MAC OSX 10.3.6 or above
Note: We reserve the right to change the design and specs of this product without further notice.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7

OneConcept Carguard 3D HDX User manual

OneConcept
Brand
OneConcept
Model
Carguard 3D HDX
Category
Drive recorders
Type
User manual
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Other documents