5. Specification 6. Optimum Settings
For best tonal fidelity, we recommend setting 1.
your audio source to line level output and use
the speaker to control overall volume level.
This speaker system is most efficient when the 2.
volume level is set between 30% to 80%. You
get highest sound quality and minimum distor-
tion within these volume levels
Place the satellite speakers at least 16 inches 3.
from each other. This enhances stereo sound ef-
fect and perceived sound field.
Provide ample space around the subwoofer unit. 4.
It needs enough room to move massive amount
of air! To further enhance lower frequencies,
place the subwoofer unit near walls.
• Total RMS Power: 50 Watts
-Satellites: 12.5 Watts RMS x 2 (into
4 ohms, @<=1% THD)
-Subwoofer: 25 Watts RMS x 1 (into 4
ohms, @<=1% THD)
• Total Peak Power: 100 Watts
• Frequency Response: 20Hz to 20kHz
• Drivers:
-Satellites: Dual 3-inch midrange and
1-inch tweeter with solid
wood enclosure
-Subwoofer: Dual 5-inch driver with
solid wood enclosure
• Speaker Dimension:
-Satellites: 6.58 x 12.05 x 9.49 inches
-Subwoofer: 3.94 x 10.52 x 4.93 inches