Indicator Light
(steadily blue
for pairing mode)
3
PAIR
Yo u r H a n d s - F r e e S p e a k e r
Before you can use your hands-free speaker,
you must pair (link) it with your phone.
Step A - ENSURE HANDS-FREE SPEAKER IS
IN PAIRING MODE
To in i t ia te e as y p a ir in g , powe r o n h an ds -f re e
speaker by pressing and holding the Power
button until the indicator light becomes
steadily lit in purple. Release the button and,
after a few moments, the indicator light will be
steadily lit in blue to indicate hands-free
speaker is in pairing mode.
If the hands-free speaker does not enter
pairing mode, see TROUBLESHOOTING for
help.
MOTOROLA and the Stylized M Logo are registered in the US
Patent & Trademark Office. The use of wireless devices and their
accessories may be prohibited or restricted in certain areas.
Always obey the laws and regulations on the use of these
products. The Bluetooth trademarks are owned by their
proprietor and used by Motorola, Inc. under license. All other
product or service names are the property of their respective
owners.
© Motorola, Inc. 2006.
Motorola, Inc.
Consumer Advocacy Office
1307 East Algonquin Road
Schaumburg, IL 60196
www.hellomoto.com
1-877-MOTOBLU
1-888-390-6456 (TTY/TDD United States for
hearing impaired)
Guide Number: 6809503A47-A
PAIR CONTINUED
Yo u r P h o n e
Step B - SET YOUR PHONE TO LOOK FOR
YOUR HANDS-FREE SPEAKER
3
4
5
1
2
For most Motorola phones:
On your Motorola phone, press (Menu) >
Settings > Connection > Bluetooth Link >
Handsfree > Look for Devices.
The phone lists Bluetooth devices it finds.
Select Motorola T305.
Select OK or Ye s to pair your hands-free
speaker with your phone.
Enter the passkey: 0000
Select OK.
When your hands-free speaker successfully
pairs with your phone, the indicator light
changes to flashing blue with quick purple
flashes.
Note: These steps are for most Motorola phones.
For other phones, see your phone's user's guide.
M
3
Yo u r p h o n e a n d h a n d s - f r e e s p e a k e r a r e n o w
paired and ready to make and receive calls. To
confirm they are operating properly, make a call:
TEST AND USE
Install visor clip and place hands-free speaker
onto your visor. See "Installing Hands-Free
Speaker in Car" on the reverse side of this guide
for details.
On your phone, dial the number you want to
call and press the Send key.
If your phone and hands-free speaker are
successfully paired, you will hear ringing on the
hands-free speaker.
4
1
2
3
After you have successfully paired your phone
and hands-free speaker, you don't need to
repeat these steps. For daily use, ensure that
your hands-free speaker is turned ON and that
your phone's Bluetooth feature is ON.
To s ave b atte r y powe r, yo ur h a nd s- f re e sp ea ke r
will power down when not connected to your
phone for more than 30 minutes.