Avery Dennison 9415 Operating instructions

Avery Dennison
Brand
Avery Dennison
Model
9415
Category
Computer desks
Type
Operating instructions

This manual is also suitable for

Avery Dennison 9415

The Avery Dennison 9415 Food Freshness System is a high-performance labeling system designed to help you quickly and easily label food products with important information such as ingredients, nutritional facts, and expiration dates. With its advanced features and user-friendly design, the Avery Dennison 9415 is the perfect solution for businesses of all sizes that need to label their food products efficiently and accurately.

Some of the key features of the Avery Dennison 9415 include:

  • Fast and efficient labeling: The Avery Dennison 9415 can print labels at speeds of up to 12 inches per second, making it one of the fastest labeling systems on the market. This means you can label your food products quickly and efficiently, saving you time and money.

Avery Dennison 9415

The Avery Dennison 9415 Food Freshness System is a high-performance labeling system designed to help you quickly and easily label food products with important information such as ingredients, nutritional facts, and expiration dates. With its advanced features and user-friendly design, the Avery Dennison 9415 is the perfect solution for businesses of all sizes that need to label their food products efficiently and accurately.

Some of the key features of the Avery Dennison 9415 include:

  • Fast and efficient labeling: The Avery Dennison 9415 can print labels at speeds of up to 12 inches per second, making it one of the fastest labeling systems on the market. This means you can label your food products quickly and efficiently, saving you time and money.
TC9415MOI Rev. AA 2/08 ©2008 Avery Dennison Corp. All Rights Reserved.
MAINTENANCE INSTRUCTIONS
Use these instructions to clear label jams in your Monarch® 9415™ Food Freshness System.
Caution: These instructions are for managers only. Removing the platen roller could void
your warranty.
Do not use sharp objects to remove jammed labels from the supply slot or the
platen roller. This damages the roller and voids the warranty.
Removing the Platen Roller
1. Turn off the printer.
2. Lift the printer from the wall and place it on a table or other flat surface.
3. Tear off any labels in the supply slot, then open the supply door and remove the roll of
labels. Do not pull labels backwards through the supply slot. This causes jams.
4. Remove the supply holder guides from the supply holder.
5. Use a Phillips screwdriver to remove the four screws from the printhead cover.
6. Lay the printhead cover to the side. Do not detach the sensor cable.
7. Carefully lift the print module and rotate it toward you so the platen roller faces up.
Be careful not damage or remove the flex cables.
Printhead Cover
Supply Holder Guide
Sensor Cable
Flex Cables
Print Module
2
Note: The print module stays attached to the printer.
8. Press down on the lever on the right-hand side of the platen roller until the platen roller
pops out of the print module.
Cleaning & Clearing Jams
1. Use your fingers to remove any labels wrapped around the platen roller.
Note: Do not use sharp objects to remove labels from the platen roller. This damages the
roller and voids the warranty.
2. Clean any adhesive buildup from the platen roller using a dry, soft-bristle brush, such as a
toothbrush, or a cotton swab moistened with isopropyl alcohol.
3. Use the brush to clean any paper dust from the print module.
4. Use a cotton swab moistened with isopropyl alcohol to clean the printhead. Allow the
printhead and the platen roller to dry before re-installing the platen roller.
Re-Installing the Platen Roller
1. Place the platen roller back into the print module so the gear is on the right-hand side.
Push gently until the roller snaps into place.
2. Lay the print module back into cavity on the supply door. Be careful not to damage or
remove the flex cables.
3. Replace the printhead cover and screw it into place. Do not over-tighten the screws.
4. Replace the supply holder guides and reload the labels.
5. Remount the printer on the wall and close the supply door.
Technical Support
Call Service for additional assistance or to order a replacement platen roller (order part number
12703158).
Platen Roller
Lever
Printhead (behind platen roller)
  • Page 1 1
  • Page 2 2

Avery Dennison 9415 Operating instructions

Avery Dennison
Brand
Avery Dennison
Model
9415
Category
Computer desks
Type
Operating instructions
This manual is also suitable for

Avery Dennison 9415

The Avery Dennison 9415 Food Freshness System is a high-performance labeling system designed to help you quickly and easily label food products with important information such as ingredients, nutritional facts, and expiration dates. With its advanced features and user-friendly design, the Avery Dennison 9415 is the perfect solution for businesses of all sizes that need to label their food products efficiently and accurately.

Some of the key features of the Avery Dennison 9415 include:

  • Fast and efficient labeling: The Avery Dennison 9415 can print labels at speeds of up to 12 inches per second, making it one of the fastest labeling systems on the market. This means you can label your food products quickly and efficiently, saving you time and money.
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents