Opticum XS65 User manual

Receiver

XS65

Manual

digital satellite receiver

KK 02/15

2

Contents

Brief description 4

1.1 Basic features 4

1.2 Package Contents 4

1.3 Front panel 5

1.4 Rear Panel 5

1.5 Remote Control 6

Installation 8

2.1 Connection 8

2.2 First start 9

2.3 List of satellites 11

2.4 Antenna Installation 12

2.5 Easynd 19

2.6 Automatic switch-o of the receiver 19

2.7 Conditional Access Card 19

Operation 20

3.1 Basic functions 20

3.2 Changing channels 20

3.3 Sleep Timer 21

3.4 Information Bar 21

3.5 EPG (electronic program guide) 21

3.6 TIMER 23

3.7 Radio channels 24

3.8 Find 24

3.9 Mailbox 25

3.10 PVR – recording programs 25

3.11 Time Shift 27

3.12 Status 28

3.13 AUDIO 29

3.14 Teletext 29

3.15 Subtitles 29

3

Contents

Menu 30

4.1 Main Menu 30

4.2 Edit Channel 30

4.3 Installing the antenna 33

4.4 System Settings 33

4.5 Media player 38

4.6 Network / APP 40

4.7 Access Card 42

4.8 Setup Disk 43

Troubleshooting 44

Safety Precautions 46

Environmental protection 48

Technical Specications 49

4

Brief description

1

1.1 Basic features

1. Smart Card reader in Conax Conditional access system

2. Support of SD / HD (MPEG2 / H.264), DVB-S, DVB-S2

3. High resolution video output - HDMI

4. Standard video output - SCART

5. 2 ports in USB 2.0 standard

6. PVR Ready – recording to an external drive

7. Time Shift (video pausing and rewinding)

8. Automatic Stand-by

9. Low power consumption in stand-by mode, below 1W

10. DiSEqC system operation

11. Multilingual menu

12. Electronic Program Guide - EPG

13. 4-digit LED on the front panel

14. Media player Full HD 1080p

15. Globo Remote – an app for Android devices

16. Internet Radio

17. Fast Channel Change

18. Subtitle support

1.2 Package content

1. Receiver

2. Remote Control,

3. Batteries - 2 x AAA (optional)

4. User Manual

5

Brief description

ENGLISH ENGLISH ENGLISH ENGLISH ENGLISH ENGLISH ENGLISH ENGLISH ENGLISH ENGLISH ENGLISH ENGLISH ENGLISH ENGLISH ENGLISH ENGLISH ENGLISH ENGLISH ENGLISH ENGLISH ENGLISH ENGLISH ENGLISH ENGLISH ENGLISH ENGLISH ENGLISH ENGLISH ENGLISH ENGLISH ENGLISH ENGLISH ENGLISH ENGLISH ENGLISH ENGLISH ENGLISH ENGLISH

Digital Terresal Receiver

KP 07/2012

ModelID: X2

• Slot for Smart Card

• Support of SD/HD (MPEG2 / MPEG4) DVB-C systems

• High deﬁnion video output - HDMI

• Standard resoluon video output - SCART

• High speed USB 2.0 port

• PVR Ready

• Time Shi (pause, rewind)

• Automac Stand-by

• Low power consumpon in Stand-by mode,

below 1W

• Mullingual menu, including English

• Electronic Program Guide - EPG

• 4 digit LED display on front panel

• Mulmedia Player Full HD 1080p

Quick Start

1.3 Front Panel

change channels/

move cursor

Power on/odisplay

1.4 Rear Panel

signal

input

card reader

HDMI

output

ethernet

SCART

output

S/PDIF USB2

WiFi

USB1

PVR

power cord

6

1.5 Remote Control

7

Brief description

POWER -

Turns on / o the receiver from / to standby mode

HDMI Switches HDMI output resolution of the image.

MUTE -

Turns on / o the sound.

0–9 Set the channel; Allows you to enter the parameters in the menu.

FAV Display the list of groups of favorite channels by a category.

Select the auto switch to standby mode. O / 10/30/60/90/120 min.

LAST - Switch to previously viewed channel.

MENU Displays the main menu on the screen; goes back to the previous

menu level.

INFO Display information about the current function or a channel infor-

mation bar.

EPG Displays the electronic program guide on the screen.

EXIT Cancel the user selection; proceeds from the menu to the viewing

mode.

Regulate the volume of the receiver; controls the cursor left / right.

Changes channel; controls the cursor move up / down.

OK Displays the channel list. Select function in the menu.

TV/ Switch between TV and Radio mode.

FIND Allows you to search channels by name.

P-/P+ Switches to the next or previous page in the channel list and in the

EPG view.

HOME The optional function (depending on the software version of the

receiver).

MAILBOX Displays a list of payments in the Conditional Access Card menu.

This function is optional

PVR Open PVR recordings. Inserted disk is required.

STATUS Displays information about the receiver.

AUDIO Audio settings / select audio track.

TEXT Show teletext of the channel (if available).

SUB-T Conguration of subtitles.

SLOW, SKIP-, SKIP+,

REW, FF, PLAY,

PAUSE, STOP, REC

Control video functions (time shift, playback, recording).

colorful buttons various functions depending on the menu

Button Function

8

1

Connect the antenna to the input according to the installation guide on

the screen.

2

Connect the at screen TV with an HDMI cable or

3

connect

CRT TV using a SCART cable.

4

Plug the power cord into an electrical

outlet.

Installation

2

Read this chapter to nd out:

1. how to connect the receiver to your TV,

2. how to install the antenna,

3. how to congure the receiver,

4. and how to use the USB drives with the receiver.

2.1 Connection

3

4

21

9

Installation

2.2 Starting up for the rst time

Turn the TV on and using its functions set the input to the receiver. Turn on

the receiver by pressing the POWER button . The installation guide OSD (On

Screen Display - items displayed on the screen by the receiver) will appear on

the screen. In the subsequent stages of the guide, you can set the basic pa-

rameters of the receiver. At any time you can return to the previous options

using the EXIT button and then you can change your selection. All the set-

ting can be changed in the main menu again.

2.2.1 Language Selection

When you start the guide, the receiver asks you rst to select the language.

Press / to select the desired language and press OK.

2.2.2 Selecting the screen format

Choose the right aspect ratio for your screen (Auto, 4: 3 Pan Scan, 4: 3 Letter

Box) or 16: 9 Widescreen) and press the OK button.

2.2.3 End of the Guide

After a suitable USB is connected, press OK. The receiver will show a message

that it is ready to work. You can go watch, go back to connection of the an-

tenna or settings in order to ne-tune and search for channels. The receiver

will also test the signal. If the tuner is not congured properly, the signal will

not be received correctly and you cannot see all the available channels.

2.3 List of satellites

Press / to select the item you want to edit. Using the red button you can

change the name of the satellite, and also set the length and direction of E -

East and W - West.

10

[OK] – Select Use the OK button, select the satellite to be received – a

star symbol will show, which satellite is selected.

Edit Using the red button you can change the name of the

satellite, and also set the longitude and direction of E-east

and W - West. Enter values using the numeric buttons on

the remote control. Use colorful buttons for appropriate

action. Red changes case, green removes characters, yellow

conrm changes and blue cancel them.

Add Using the green button, you can add a satellite. Edit it in the

same way as described in the section above - Edit.

Delete With the blue button, you can delete a satellite from the

list. Removal of the satellites will delete access to the

transponders and the channels. A message on the screen

will warn you about that. If you really want to delete the

satellite, highlight „Yes” and press OK.

11

Installation

2.4 Antenna Installation

In this menu, you can install the antenna and then search for channels. An-

tenna installation process is often complicated because it requires technical

knowledge and additional multiple devices. In many cases you will not need

the knowledge of the advanced settings. Modern technologies allow to ad-

just the antenna without leaving home, using the receiver. When installing

the antenna, however, it is necessary to use additional manuals for the an-

tenna, converters, switches or motor used. For a single LNB, leave the default

conguration for DiSEqC switch, select the appropriate port settings and se-

lect Scan using colored keys.

The strength and the quality of the signal is shown on the bottom of the

screen in the form of strips and percentages.Use this as a hint to set up the

antenna the best way.

Press / to select the item you want to set, and then using the / give it

the appropriate settings.

2.4.1 Scanning options - color key functions

Change to motor Press the white button to select motor

/Change to xed or LNB for adjusting the antenna position.

12

Scan the satellite Press the Red button to scan a single satellite. De-

tailed satellite scan options:

Satellite Select the satellite to scan.

FTA Only Select No or Yes, if you want to search only unen-

crypted channels.

Network search Select No or Yes, if you want to scan only the frequ-

encies with the NIT (Network Information Table).

Tuner Choose a tuner if there is more than one connec-

ted.

Scan Press OK to start a scan.

13

Installation

TP search Transponder scan. Press the green button to scan the

transponder. In the window that appears after 3 seconds

on the screen, set the options:

FTA only Select Yes if you want to search only unencrypted

channels.

Scan channels Select the type of channels you want to search (TV,

radio, or both at once).

Network search Select Yes, if you want to scan only the frequen-

cies with the NIT (Network Information Table).

When this option is selected, the progress bar is

not display.

Press / to go to OK and press the OK button to start

scanning, or choose Cancel to return to the settings.

Edit TP Operations in the transponder list. Press the yellow but-

ton to see a list of transponders. This feature is also availa-

ble after pressing the green button and after an exit from

the window of a single transponder scan settings. Press /

to change the satellite. Using the / buttons select the

transponder. You can read the signal strength and quality.

14

Features available in the edit transponder window (colored buttons):

Edit Set frequency, symbol rate and polarization for

the selected transponder.

Add Add a new transponder, set its frequency, symbol

rate and polarization.

Delete Delete a transponder. Conrm your decision by

selecting „Yes” and press OK or select „No” to exit.

Search Scan a transponder as in TP Scan menu (described

above).

Blindscan Automatic scan. Press the BLUE button to go to search for

channels without making any additional settings. Blind-

scan is an operation that scans all available transponders

and frequencies, and therefore takes longer than other

scans to nish.

15

Installation

2.5.2 Scanning options – using the LNB

Press the white button to select how to set the antenna to the LNB.

Satellite Select the satellite you want to use. You can choose from

the satellites that were previously selected and marked

with a star on the list of satellites.

LNB Frequency Select the frequency at which the converter is working. This

choice has an impact on what further options are possible

to set in this menu.

Transponder Select a transponder according to your needs.

DiSEqC1.0 Select the port to which you have connected the DiSEqC.

DiSEqC1.1 Adjust the DiSEqC1.1 to receive signals from more sources.

22K Disable 22K for LNB with unusual frequency. With universal

values, the parameter is set to „Automatic”

Easynd Enable EasyFind, if you have a converter that supports it.

This function is described in section 2.6 on page 19.

16

Settings for DiSEqC1.2:

Satellite Press / to select the satellite. You can choose

from satellites marked with a star symbol that are

already on the list of satellites.

Transponder Press / to select a transponder.

Position No.&Save Press / to select the number you want to as-

sign the position of the antenna.

Go to X Go to the saved position.

West Save/Stop East

Press / to rotate the antenna to the west or to the east.

Press OK to save the item under the pre-selected number, or to stop

the rotation of the antenna.

Recalculation Highlight and press OK to calculate and check the

position of the antenna.

IF Channel Select IF Channel (1 to 8).

Delete all Delete all the settings of the antenna; available if

the DiSEqC1.2 was selected.

Motor Setting detailed settings of the motor.

(Dierent settings depending on the selected

standard USALS / DiSEqC1.2)

17

Installation

Settings for USALS:

Satellite Press / to select the satellite. You can choose

from satellites marked with a star symbol already

on the list of satellites.

Transponder Press / to select a transponder.

The antenna should automatically turn to the selected satellite and

transponder.

Limit setup this settings allow you to set lthe farthest point to which

the rotor turns the antenna. This function is used when

there are physical barriers that would stop the antenna.

Press / to turn on the western or eastern limit. Using

button go to West < Limit setup > East. Press / to turn

the antenna to the west or east, and press OK. There will

be information of the limit that was set on the screen. To

return to the relevant point, press and then click OK.

18

2.5 Easynd

Easynd is a feature that allows you to set the position of a satellite dish

without compass, another person and technical understanding. You need

the matching Easy nd LNB (which is the gizmo on the end of the dish arm

that collects the satellite signal and sends it to the receiver). Set the elevation

of the dish according to your location and point the dish East. In the Antenna

Installation menu choose a satellite and go to the right column with features

of a satellite and scroll down to Easynd. Enable it with the button. The diode

on the LNB now will indicate if the satellite dish receive strong signal. Slowly

move the dish. If the light pn LNB glows yellow it means you get the dish clo-

ser to stronger signal. Continue slowly until it  ashes green and then when

it glows permanently green you are locked onto the satellite with a strong si-

gnal. If you want to adjust the dish to satellite again you can turn on Easynd

function in the status menu.

green diode on

the LNB

19

Installation

2.6 Automatic Power Down

In accordance to the EU requirements, your receiver has been equipped with

the „Automatic Power Down” function. After a set amount of time, the re-

ceiver will automatically switch to the standby mode. It means that in prac-

tice, if the receiver doesn’t receive any signal from the remote controller or

from the buttons on the front panel, it switches itself o. Depending on the

model, this function is either on or o. You can disable or enable it using ap-

propriate settings in the menu.

2.7 Conditional Access Card

Without a conditional access card inserted, the device can only receive unen-

crypted channels. Insert the card to be able to watch encrypted channels.

The card can be obtained from satellite TV providers.

Insert the card into the reader a gold chip facing up. Note! If the location

of the card reader in your decoder is dierent from the picture above, insert

the card the gold chip facing downwards.

20

Operation

3

Read this chapter to learn how to use and set up the receiver, depending on

your needs.

3.1 Basic Features

To turn your receiver ON or to Standby, use the button on the remote con-

trol. Choose the desired channel with the / buttons. Alternatively, you can

input the channel number with the numeric buttons on the remote control.

Press OK in viewing mode to display the TV Channel List. The volume can be

adjusted with the / buttons.

3.2 Changing channels

Your receiver is equipped with several ways to change the channels.

1. Directly by selecting the channel number buttons 0-9.

2. Through the channel list and OK button.

3. Using the P +, P- or / .

4. Through the EPG.

5. Through the FAV button – lists of favorite channels.

6. Through the button, to switch to the previously viewed channel.

Direct access through the 0-9 buttons

To gain direct access to a certain channel, simply input its number with the

0–9 keys on the remote control. Channel numbers can be up to four digits

long. Entering a number with less than four digits is possible. Just wait a few

seconds and your receiver will switch to the selected channel or press OK im-

mediately after selecting the channel number.

Channel List

Press OK in viewing mode to display a list of channels. Use /

in the channel list to highlight the desired channel and press OK again to

switch to it. Press / or P +, P- to go to the next or previous page by ten

channels. Press OK again to exit the Channel List.

Page is loading ...

Opticum XS65 User manual

Opticum XS65 User manual

Related papers

Other documents