2. Trim-Tex
  3. 09TT3010 Pullaway L Bead

Trim-Tex 09TT3010 Pullaway L Bead Installation guide

  • Hello! I've reviewed the product details for the Trim-Tex Pullaway L Bead. This document details how the bead provides a consistent finish for drywall applications, including its masking features and simple steps for installation. I'm ready to answer any questions you might have.
  • What is the purpose of the Pullaway L Bead?
    How much masking protection does it offer?
    What are the steps for installing the bead?
3700 W Pratt Avenue, Lincolnwood, IL 60712 • (800) 874-2333 • trim-tex.com
Installation Guide
Before Installation:
Measure, cut and dry fit the bead.
Step 1:
Coat the bead with Trim-Tex 847 Spray
Adhesive.
Step 2:
Press the bead in place, applying pressure
to the mud legs.
Step 3:
Staple every 6”-8” using ½” staples.
Step 4:
Finish with drywall compound.
Step 1: Step 2:
Step 4:
Pullaway® L Bead
1 of 1
Step 3:
Got a messy job that needs maximum masking protection?
This bead's for you! This bead creates a smooth finished
edge when drywall meets another substrate. Its removable
strip pulls out easily after finishing, and provides up to ⁄" of
masking protection.
Technical Specs Scan Below for
Installation Video
1"
⁄ "
/