Trim-Tex Closed Angle Corner Bead Installation guide

Brand
Trim-Tex
Model
Closed Angle Corner Bead
Type
Installation guide
3700 W Pratt Avenue, Lincolnwood, IL 60712 • (800) 874-2333 • trim-tex.com
Installation Guide
Before Installation:
Use minimal drywall setback on outside
corners. Measure, cut and dry fit the bead,
leaving a ⁄” gap at the floor.
Step 1:
Coat both the bead and edge of drywall
with Trim-Tex 847 Spray Adhesive.
Step 2:
Press the bead in place, applying pressure
to the mud legs.
Step 3:
Staple every 6”-8” using ½” staples.
Step 4:
Finish with drywall compound.
Note:
When working with especially uneven framing — where applying extra pressure to the bead in order
to fit it onto the corner is necessary — installing Closed Angle Corner Bead with 847 Spray Adhesive
may not be useful. In these cases, use a laser or chalk line for precision, push the bead into place
and install with ½” staples only, every 2”-4”.
Step 1: Step 2:
1 of 1
Step 3: Step 4:
Technical Specs
Closed Angle
Corner Bead
Achieve the soft, slightly rounded edge of a standard Trim-Tex Corner
Bead with a tighter 81-degree angle that conquers uneven framing,
and a unique hole pattern that saves you mud and time. With Closed
Angle Corner Bead’s more acute angle comes an increased rigidity,
giving many installers the feeling of using a metal corner bead — but
with all the durability of Trim-Tex’s top-quality vinyl materials.
Setback: Standard
¾" R. Bullnose
Installation
350 Chamfer
Installation
Standard
Installation
Standard
Installation
1 ⁄ "
81°
  • Page 1 1

Trim-Tex Closed Angle Corner Bead Installation guide

Brand
Trim-Tex
Model
Closed Angle Corner Bead
Type
Installation guide
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents