Samsung HW-S60A User manual

HW-S60A / S61A

FULL MANUAL

Imagine the possibilities

Thank you for purchasing this Samsung product.

To receive more complete service, please register

your product at www.samsung.com/register

ENG - 2

SAFETY INFORMATION

SAFETY WARNINGS

TO REDUCE THE RISK OF ELECTRIC SHOCK, DO

NOT REMOVE THE COVER (OR BACK).

NO USER-SERVICEABLE PARTS ARE INSIDE.

REFER SERVICING TO QUALIFIED SERVICE

PERSONNEL.

Refer to the table below for an explanation of

symbols which may be on your Samsung product.

CAUTION

RISK OF ELECTRIC SHOCK.

DO NOT OPEN.

This symbol indicates that high voltage

is present inside. It is dangerous to

make any kind of contact with any

internal part of this product.

This symbol indicates that this product

comes with important literature

concerning operation and maintenance.

Class II product : This symbol indicates

that a safety connection to electrical

earth (ground) is not required.

If this symbol is not present on a

product with a power cord, the product

MUST have a reliable connection to

protective earth (ground).

AC voltage : Rated voltage marked

with this symbol is AC voltage.

DC voltage : Rated voltage marked

with this symbol is DC voltage.

Caution. Consult Instructions for use :

This symbol instructs the user to

consult the user manual for further

safety related information.

WARNING

•To reduce the risk of re or electric shock, do

not expose this appliance to rain or moisture.

•To prevent injury, this apparatus must be

securely attached to the oor/wall in

accordance with the installation instructions.

•This product contains chemicals known to the

State of California to cause cancer and birth

defects or other reproductive harm.

CAUTION

•Do not expose this apparatus to dripping or

splashing. Do not put objects lled with

liquids, such as vases, on the apparatus.

•To turn this apparatus off completely, you

must pull the power plug out of the wall

socket. Consequently, the power plug must

be easily and readily accessible at all times.

FCC NOTE (for U.S.A):

FCC Supplier’s Declaration of Conformity

Responsible Party - U.S. Contact Information:

Samsung Electronics America, Inc.

85 Challenger Road.

Ridgeeld Park, NJ 07660

Phone: 1-800-SAMSUNG (726-7864)

FCC Compliance Statement :

This device complies with Part 15 of the FCC Rules.

Operation is subject to the following two

conditions:

(1) This device may not cause harmful

interference, and (2) this device must accept any

interference received, including interference that

may cause undesired operation.

ENG - 3

FCC Caution :

•Any changes or modications not expressly

approved by the party responsible for

compliance could void the user’s authority to

operate this equipment.

•This product satises FCC regulations when

shielded cables and connectors are used to

connect the unit to other equipment.

To prevent electromagnetic interference with

electric appliances, such as radios and

televisions, use shielded cables and

connectors for connections.

Class B FCC Statement

This equipment has been tested and found to

comply with the limits for a Class B digital device,

pursuant to Part 15 of the FCC Rules. These limits

are designed to provide reasonable protection

against harmful interference in a residential

installation. This equipment generates, uses and

can radiate radio frequency energy and, if not

installed and used in accordance with the

instructions, may cause harmful interference to

radio communications. However, there is no

guarantee that interference will not occur in a

particular installation. If this equipment does

cause harmful interference to radio or television

reception, which can be determined by turning

the equipment off and on, the user is encouraged

to try to correct the interference by one of the

following measures:

•Reorienting or relocating the receiving

antenna.

•Increasing the separation between the

equipment and receiver.

•Connecting the equipment to an outlet that is

on a different circuit than the radio or TV.

•Consulting the dealer or an experienced

radio/TV technician for help.

FCC Radiation Exposure Statement :

This equipment complies with FCC radiation

exposure limits set forth for an uncontrolled

environment. This equipment should be installed

and operated so there is at least 8 inches (20 cm)

between the radiator and your body. This device

and its antenna(s) must not be co-located or

operated in conjunction with any other antenna or

transmitter.

CALIFORNIA USA ONLY (Applicable for

networking models only.)

This Perchlorate warning applies only to primary

CR(Manganese Dioxide) Lithium coin cells in the

product sold or distributed ONLY in California

USA “Perchlorate Material - special handling may

apply, See www.dtsc.ca.gov/hazardouswaste/

perchlorate.”

Dispose unwanted electronics through an

approved recycler. To nd the nearest recycling

location, go to our website:www.samsung.com/

recycling Or call, 1‐800‐SAMSUNG

WARNING: Cancer and Reproductive Harm

- www.P65Warnings.ca.gov.

Important Safety Instructions

Read these operating instructions carefully

before using the unit. Follow all the safety

instructions listed below. Keep these operating

instructions handy for future reference.

1. Read these instructions.

2. Keep these Instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this apparatus near water.

6. Clean only with dry cloth.

ENG - 4

7. Do not block any ventilation openings.

Install in accordance with the manufacturer’s

instructions.

8. Do not install near any heat sources such as

radiators, heat registers, stoves, or other

apparatus (including ampliers) that produce

heat.

9. Do not defeat the safety purpose of the

polarized or grounding-type plug.

A polarized plug has two blades with one

wider than the other. A grounding type plug

has two blades and a third grounding prong.

The wide blade or the third prong are

provided for your safety. If the provided plug

does not t into your outlet, consult an

electrician for replacement of the obsolete

outlet.

10. Protect the power cord from being walked

on or pinched particularly at plugs,

convenience receptacles, and the point

where they exit from the apparatus.

11. Only use attachments/accessories specied

by the manufacturer.

12. Use only with the cart, stand,

tripod, bracket, or table

specied by the manufacturer,

or sold with the apparatus.

When a cart is used, use caution when

moving the cart/apparatus combination to

avoid injury from tip-over.

13. Unplug this apparatus during lightning

storms or when unused for long periods of

time.

14. Refer all servicing to qualied service

personnel. Servicing is required when the

apparatus has been damaged in any way,

such as power-supply cord or plug is

damaged, liquid has been spilled or objects

have fallen into the apparatus, the apparatus

has been exposed to rain or moisture, does

not operate normally, or has been dropped.

PRECAUTIONS

1. Ensure that the AC power supply in your

house complies with the power

requirements listed on the identication

sticker located on the bottom of your

product. Install your product horizontally, on

a suitable base (furniture), with enough

space around it for ventilation (3~4 inches).

Make sure the ventilation slots are not

covered. Do not place the unit on ampliers

or other equipment which may become hot.

This unit is designed for continuous use.

To fully turn off the unit, disconnect the AC

plug from the wall outlet. Unplug the unit if

you intend to leave it unused for a long

period of time.

2. During thunderstorms, disconnect the AC

plug from the wall outlet. Voltage peaks due

to lightning could damage the unit.

3. Do not expose the unit to direct sunlight or

other heat sources. This could lead to

overheating and cause the unit to

malfunction.

ENG - 5

4. Protect the product from moisture (i.e.

vases), and excess heat (e.g. a replace) or

equipment creating strong magnetic or

electric elds. Unplug the power cable from

the AC wall socket if the unit malfunctions.

Your product is not intended for industrial

use. It is for personal use only. Condensation

may occur if your product has been stored in

cold temperatures. If transporting the unit

during the winter, wait approximately

2 hours until the unit has reached room

temperature before using.

5. The battery used with this product contains

chemicals that are harmful to the

environment. Do not dispose of the battery

in the general household trash. Do not

expose the battery to excess heat, direct

sunlight, or re. Do not short circuit,

disassemble, or overheat the battery.

CAUTION : Danger of explosion if the battery

is replaced incorrectly. Replace only with the

same or equivalent type.

Fabric cleaning

Remove any dirt or stain on the product surface

immediately.

Removing and cleaning can be less effective for

some substances or if left for a prolonged time.

CAUTION

•Use a vacuum cleaner or an adhesive lint

roller to remove dust, handprints, and the

likes.

– Some cleaning brushes may damage the

product, depending on the materials they

contain.

– Towels and cleaning clothes may leave

lint or dirt on the product.

•Do not use a nail or other tools to scratch the

dirt off. It may damage the fabric.

•To remove oil or liquid stains, use a clean

white cloth moist with water. If the stain

persists, wipe it with a mixture of water and

neutral detergent (such as dishwashing

soaps) and a cloth.

– A non-neutral detergent or cleaner may

cause discoloration or fabric damage.

– After cleaning, use a dry cloth or

hairdryer to dry the area.

– Do not use excessive force to avoid

discoloration or fabric damage.

ENG - 6

CONTENTS

01 Checking the Components 8

Inserting Batteries before using the Remote Control (AA batteries X 2) ------------------------- 8

02 Product Overview 9

Top Panel of the Soundbar ------------------------- 9

Bottom Panel of the Soundbar ------------------------- 11

03 Using the Remote Control 12

How to Use the Remote Control ------------------------- 12

Using the Hidden Buttons (Buttons with more than one function) ------------------------- 15

Output specications for the different sound effect modes ------------------------- 15

Adjusting the Soundbar volume with a TV remote control ------------------------- 16

04 Connecting the Soundbar 17

Connecting Electrical Power ------------------------- 17

Connecting an SWA-9100S (Sold Separately),

SWA-W500 (Sold Separately) to your Soundbar ------------------------- 17

05 Using a wired connection to the TV 18

Method 1. Connecting with HDMI ------------------------- 18

Method 2. Connecting using an Optical Cable ------------------------- 20

06 Using a wireless connection to the TV 21

Method 1. Connecting via Bluetooth ------------------------- 21

Method 2. Connecting via Wi-Fi ------------------------- 23

07 Connecting an External Device 24

Connecting using an Optical Cable ------------------------- 24

ENG - 7

08 Connecting a Mobile Device 25

Method 1. Connecting via Bluetooth ------------------------- 25

Method 2. Connecting via Wi-Fi (Wireless Network) ------------------------- 28

Getting Started with Amazon Alexa (Built-in Alexa) ------------------------- 29

Getting Started with Alexa on Amazon Product (Works with Alexa) ------------------------- 31

Using the Tap Sound ------------------------- 33

09 Connecting To Apple AirPlay 2 34

10 Installing the Wall Mount 35

Installation Precautions ------------------------- 35

Wallmount Components ------------------------- 35

11 Installing the Soundbar in front of TV 37

12 Software Update 38

Auto Update ------------------------- 38

USB Update ------------------------- 38

Reset ------------------------- 39

13 Troubleshooting 40

14 License 42

15 Open Source License Notice 42

16 Important Notes About Service 43

17 SpecicationsandGuide 44

Specications ------------------------- 44

ENG - 8

01 CHECKING THE COMPONENTS

VOL WOOFER

SOUNDBAR

SOUND

MODE

PAIR

Soundbar Main Unit Soundbar Remote Control

(AH59-02767A)

/ Batteries

HDMI Cable

(BN39-01997A)

AC/DC Adapter

(Soundbar)

(BN44-01014A)

Power Cord

(Soundbar)

(3903-001117)

Wall Mount Guide (AH63-04369B)

x 2 x 2

(M4 x L10)

x 2

Holder-Screw (AH61-04110A) Bracket-Wall Mount

(AH61-04119A)

Screw (6001-001202)

•For more information about the power supply and power consumption, refer to the label attached

to the product. (Label: Bottom of the Soundbar Main Unit)

•To purchase additional components or optional cables, contact a Samsung Service Center or

Samsung Customer Care.

•For more information about the wallmount see page 35.

•Design, specications, and App screen are subject to change without prior notice.

•The appearance of the accessories may differ slightly from the illustrations above.

Inserting Batteries before using the Remote Control (AA batteries X 2)

Slide the back cover in the direction of the arrow

until it is completely removed. Insert 2 AA batteries

(1.5V) oriented so that their polarity is correct. Slide

the back cover back into position.

ENG - 9

02 PRODUCT OVERVIEW

Top Panel of the Soundbar

Top Panel

Position the product so that

the SAMSUNG logo is

located on the top.

󰟴 󰟶󰟵

󰟳

󰟳LED

indicator

The LED Indicator ashes, glows, or changes color depending on the Soundbar's current

mode or status. The color of the LED indicator and the number of lights indicate the active

mode as described below.

W

White LED

W

White LED

M

Multicolor LED

W

White LED

W

White LED

•The Multicolor LED changes to White, Cyan, Green, Red, and Blue depending on the

mode or status.

󰟴

Multi

Function

Button

•In standby mode, press the (Multi Function) button to turn on the Soundbar.

•Press the (Multi Function) button to change the mode. Each time you change the

mode, the LED lights in white and then turns off.

LED

Indicator

White On -> Off White On -> Off White On -> Off

“Digital Audio In” or

“TV ARC”“Wi-Fi” “Bluetooth”

󰟵Volume

Button Press the (Volume) button to adjust the volume.

ENG - 10

󰟶

Mic

On/Off

Button

Press the (Mic On/Off) button to turn on or off the microphone.

LED Indicator

Red On

“Mic Off”“Mic On”

•When you plug in the AC cord, the power button will begin working in 4 to 6 seconds.

•When you turn on this unit, there will be a 4 to 5 second delay before it produces sound.

•If you hear sounds from both the TV and Soundbar, go to the Settings menu for the TV audio and

change the TV speaker to External Speaker.

•You can turn on and off audio feedback by using SmartThings app. To learn about using the

SmartThings app, refer to “Method 2. Connecting via Wi-Fi (Wireless Network)”.

ENG - 11

Bottom Panel of the Soundbar

SERVICE DC 19V

HDMI

(ARC)

DIGITAL AUDIO IN

(OPTICAL)

ID SET NETWORK

SERVICE DC 19V

HDMI

(ARC)

DIGITAL AUDIO IN

(OPTICAL)

SERVICE DC 19V

HDMI OUT

(TV-ARC)

DIGITAL AUDIO IN

(OPTICAL)

DIGITAL AUDIO IN

(OPTICAL)

ID SET NETWORK

SERVICE DC 19V

HDMI

(ARC)

DIGITAL AUDIO IN

(OPTICAL)

ID SET NETWORK

SERVICE DC 19V

HDMI

(ARC)

DIGITAL AUDIO IN

(OPTICAL)

SERVICE DC 19V

HDMI OUT

(TV-ARC)

DIGITAL AUDIO IN

(OPTICAL)

DIGITAL AUDIO IN

(OPTICAL)

ID SET NETWORK

SERVICE DC 19V

HDMI

(ARC)

DIGITAL AUDIO IN

(OPTICAL)

ID SET NETWORK

SERVICE DC 19V

HDMI

(ARC)

DIGITAL AUDIO IN

(OPTICAL)

SERVICE DC 19V

HDMI OUT

(TV-ARC)

DIGITAL AUDIO IN

(OPTICAL)

DIGITAL AUDIO IN

(OPTICAL)

ID SET NETWORK

SERVICE DC 19V

HDMI

(ARC)

DIGITAL AUDIO IN

(OPTICAL)

ID SET NETWORK

SERVICE DC 19V

HDMI

(ARC)

DIGITAL AUDIO IN

(OPTICAL)

SERVICE DC 19V

HDMI OUT

(TV-ARC)

DIGITAL AUDIO IN

(OPTICAL)

DIGITAL AUDIO IN

(OPTICAL)

ID SET NETWORK

󰟳 󰟴 󰟵 󰟶 󰟷 󰟸

󰟳

ID SET

Press to connect the Soundbar to Surround speakers and a subwoofer wirelessly.

(The surround speaker, subwoofer are sold separately.)

󰟴NETWORK

Press to connect to a wireless network (Wi-Fi) via the SmartThings app.

󰟵SERVICE

Connect a USB storage device to upgrade the product's software.

󰟶DC 19V (Power Supply In)

Connect the AC/DC power adapter. (See page 17)

󰟷DIGITAL AUDIO IN (OPTICAL)

Connect to the digital (optical) output of an external device. (See page 24)

󰟸HDMI (ARC)

Connect to the HDMI (ARC) port on a TV. (See page 18)

•When disconnecting the power cable of the AC/DC power adapter from a wall outlet, pull the plug.

Do not pull the cable.

•Do not connect this unit or other components to an AC outlet until all connections between

components are complete.

ENG - 12

03 USING THE REMOTE CONTROL

How to Use the Remote Control

VOL WOOFER

SOUNDBAR

SOUND

MODE

PAIR

󰟳

󰟴

󰟵

󰟶

󰟷

󰟹

󰟸

󰟺

󰟼

󰟻

󰟳Power

Turns the Soundbar on and off.

LED

Indicator

Cyan Blinks X1

On Off

Red Blinks X3

•Auto Power Down Function

The unit turns off automatically in the following

situations:

– In “Digital Audio In” or “TV ARC” / “Wi-Fi” /

“Bluetooth” mode if there is no audio signal for 18

minutes.

󰟴 (Source)

Press to select a source connected to the Soundbar.

•Audio Feedback On/Off

You can turn on or off the Audio Feedback. Press and hold

the (Source) button on the remote control for

5 seconds while the Soundbar is off (Standby mode).

LED

Indicator

Cyan Blinks X1

On Off

Red Blinks X1

󰟵 (Mute)

Press the (Mute) button to mute the sound.

Press it again to unmute the sound.

LED

Indicator

Blinks X Repeatly

ENG - 13

󰟶SOUND MODE

By pressing the button, you can select the desired audio mode. Each time the mode changes, the

Multicolor LED blinks in white.

LED

Indicator

White Blinks X1

“Standard”  “Music”  “Adaptive Sound”

•Standard

Outputs the original sound.

•Music

Provides more natural and room lling sound for music content.

•Adaptive Sound

Analyzes the content in real time and automatically provides the optimal sound eld based on the

characteristics of the content.

󰟷 Bluetooth PAIR

Switch the Soundbar to Bluetooth pairing mode.

When you press the button, the LED display changes as shown below.

•Until pairing is complete, the Multicolor LED changes as Red → Green → Blue in turn.

LED

Indicator

Red → Green → Blue Blinks

Pairing Connection is complete

Cyan Blinks X3

“Ready to connect via Bluetooth.”

󰟸p (Play / Pause)

You can also play or pause music by pressing the button.

󰟹Up/Down/Left/Right

Press Up/Down/Left/Right on the button to select or set functions.

•Music Skip

Press the Right button to select the next music le. Press the Left button to select the previous

music le.

ENG - 14

󰟺 (Sound Control)

By pressing the button, you can select the desired audio mode. The desired item can be adjusted using

the Up/Down buttons. Each time the mode changes, the Multicolor LED blinks in white.

LED

Indicator

White Blinks X1

“Treble”  “Bass”  “Sync”  “Center Level”  “Side Level”

– To control the volume of the treble or bass sound, select “Treble” or “Bass” in Sound Settings, and

then adjust the volume between -6~+6 by using the Up/Down buttons.

– Press and hold the (Sound Control) button for about 5 seconds to adjust the sound for each

frequency band. 150Hz, 300Hz, 600Hz, 1.2kHz, 2.5kHz, 5kHz, and 10kHz are selectable using the

Left/Right buttons and each can be adjusted to a setting between -6 to +6 using the Up/Down

buttons. (Make sure the Sound mode is set to “Standard”.)

– To control the volume of the each speaker select “Center Level” or “Side Level” in Sound Settings,

and then adjust the volume between -6~+6 by using the Up/Down buttons.

– If the video on the TV and audio from the Soundbar are not synchronized, select “Sync” in Sound

Control, and then set the audio delay between 0~300 milliseconds by using the Up/Down buttons.

– “Sync” is only supported for some functions.

– If Surround Speakers are connected, select “Rear Level” and then use the Up/Down buttons to

adjust the volume within a -6 to +6 range.

󰟻WOOFER (BASS) LEVEL

Push the button up or down to adjust the level of the woofer (bass) to -12 or between -6 to +6. To set the

woofer (bass) volume level to 0 (Default), press the button.

󰟼VOLUME

Push the button up or down to adjust the volume.

LED

Indicator

White moves to right X1

Volume Up

White moves to left X1

Volume Down

ENG - 15

Using the Hidden Buttons (Buttons with more than one function)

Hidden Button

Reference page

Remote Control Button Function

WOOFER (Up) TV remote control On/Off (Standby) page16

Up ID SET

(Sound Control) 7 Band EQ page14

(Source) Audio Feedback On/Off (Standby) page12

Outputspecicationsforthedifferentsoundeffectmodes

Effect Input

Output

With Subwoofer Only With Subwoofer & Wireless

Rear Speaker Kit

Standard 2.0 ch 2.1 ch 2.1 ch

5.1 ch 2.1 ch 5.1 ch

Music 2.0 ch 5.1 ch 7.1 ch

5.1 ch 5.1 ch 7.1 ch

Adaptive Sound 2.0 ch 5.1 ch 7.1 ch

5.1 ch 5.1 ch 7.1 ch

•The Samsung Wireless Rear Speaker Kit, and Subwoofer can be purchased separately.

To purchase a Kit or the Subwoofer, contact the vendor you purchased the Soundbar from.

ENG - 16

Adjusting the Soundbar volume with a TV remote control

Adjust the Soundbar volume using the TV’s remote control.

•This function can be used with IR remote controls only. Bluetooth remote controls (remote

controls that require pairing) are not supported.

•Set the TV speaker to External Speaker to use this function.

•Manufacturers supporting this function:

VIZIO, LG, Sony, Sharp, PHILIPS, PANASONIC, TOSHIBA, Hisense, RCA

1. Turn Off the Soundbar.

2. Push up and hold the WOOFER button for 5 seconds.

Each time you push the WOOFER button up and hold it for 5 seconds, the mode switches in the

following order: “Off-TV Remote” (Default mode), “Samsung-TV Remote”, “All-TV Remote”.

The LED indicator status changes each time the mode is changed, as shown below.

Remote Control Button LED Indicator Status

SOUND

MODE

VOL

WOOFER

SOUNDBAR

5 Sec

"Off-TV Remote"

(Default mode)

Red Blinks X1

Disable the TV remote control.

SOUND

MODE

VOL WOOFER

SOUNDBAR

5 Sec

"Samsung-TV Remote"

Cyan Blinks X1

Enable a Samsung TV’s IR remote

control.

SOUND

MODE

VOL

WOOFER

SOUNDBAR

5 Sec

"All-TV Remote"

Blue Blinks X1

Enable a third-party TV’s IR remote

control.

ENG - 17

04 CONNECTING THE SOUNDBAR

Connecting Electrical Power

Use the power components to connect the Soundbar to an electrical outlet in the following order:

•For more information about the required electrical power and power consumption, refer to the

label attached to the product. (Label: Bottom of the Soundbar Main Unit)

1. First connect the power cable to the AC/DC adapter.

Connect the AC/DC adapter (with the power cable) to the Soundbar.

2. Connect the power cord to a wall socket.

DC 19V

Power Cord

AC/DC Adapter

SERVICE DC 19V

HDMI

(ARC)

DIGITAL AUDIO IN

(OPTICAL)

ID SET NETWORK

SERVICE DC 19V

HDMI

(ARC)

DIGITAL AUDIO IN

(OPTICAL)

SERVICE DC 19V

HDMI OUT

(TV-ARC)

DIGITAL AUDIO IN

(OPTICAL)

DIGITAL AUDIO IN

(OPTICAL)

ID SET NETWORK

SERVICE DC 19V

HDMI

(ARC)

DIGITAL AUDIO IN

(OPTICAL)

ID SET NETWORK

SERVICE DC 19V

HDMI

(ARC)

DIGITAL AUDIO IN

(OPTICAL)

SERVICE DC 19V

HDMI OUT

(TV-ARC)

DIGITAL AUDIO IN

(OPTICAL)

DIGITAL AUDIO IN

(OPTICAL)

ID SET NETWORK

DC 19V

Bottom of the Soundbar Main Unit

NOTES

•If you unplug and reconnect the power cord when the product is turned on, the Soundbar turns on

automatically.

•Make sure to rest the AC/DC Adapter at on a table or the oor. If you place the AC/DC Adapter so

that it is hanging with the AC cord input facing upwards, water or other foreign substances could

enter the Adapter and cause the Adapter to malfunction.

Connecting an SWA-9100S (Sold Separately), SWA-W500 (Sold

Separately) to your Soundbar

Expand to true wireless surround sound by connecting the Samsung Wireless Rear Speaker Kit

(SWA-9100S, sold separately) and Wireless Subwoofer (SWA-W500, sold separately) to your Soundbar.

For detailed information on connections, see the Samsung Wireless Rear Speaker Kit and Wireless

Subwoofer manual.

ENG - 18

05 USING A WIRED CONNECTION TO THE TV

Method 1. Connecting with HDMI

CAUTION

•When both the HDMI cable and optical cable are connected, the HDMI signal is received rst.

•To connect the HDMI cable between the TV and Soundbar, be sure to connect the terminals

marked ARC. Otherwise, the TV sound may not be output.

•The recommended cable is High Speed HDMI Cable with Ethernet.

Connecting the TV that supports HDMI ARC (Audio Return Channel)

HDMI IN

(ARC)

SERVICE DC 19V

HDMI

(ARC)

DIGITAL AUDIO IN

(OPTICAL)

Connect to the HDMI IN

(ARC) port of your TV.

HDMI Cable

Bottom of the

Soundbar

Connect to the HDMI (ARC) port of the

Soundbar main unit.

Top of the Soundbar

LED

Indicator

White On -> Off

“Digital Audio In”

1. With the Soundbar and TV turned off, connect the HDMI cable as shown in the gure.

2. Turn on the Soundbar and TV.

3. TV sound is output from the Soundbar.

ENG - 19

•When the TV sound is not output, press the (Multi Function) button at the top of the

Soundbar or the (Source) button on the remote control to select the “Digital Audio In”

mode.

•When the sound is not output, check the HDMI Cable connection again.

•Use the volume buttons on the TV’s remote control to change the volume on the Soundbar.

NOTES

•When you connect the TV that supports the HDMI ARC (Audio Return Channel) to the Soundbar

with an HDMI cable, you can transmit the digital video and audio data without connecting a

separate optical cable.

•We recommend you use a coreless HDMI cable if possible. If you use a cored HDMI cable, use one

whose diameter is less than 0.55 inches (14 mm).

•This function is not available if the HDMI cable does not support ARC.

•When the audio in a broadcast is encoded in Dolby Digital and the “Digital Output Audio Format” on

your TV is set to PCM, we recommend that you change the setting to Dolby Digital. When the

setting on the TV is changed, you will experience better sound quality. (The TV menu may use

different words for Dolby Digital and PCM depending on the TV manufacturer.)

ENG - 20

Method 2. Connecting using an Optical Cable

Pre-connection Checklist

•When both the HDMI cable and optical cable are connected, the HDMI signal is received rst.

•When you use an optical cable and the terminals have covers, be sure to remove the covers.

LED

Indicator

White On -> Off

“Digital Audio In”

OPTICAL OUT

SERVICE DC 19V

HDMI OUT

(TV-ARC)

DIGITAL AUDIO IN

(OPTICAL)

Bottom of the Soundbar

Optical Cable

(not supplied)

Top of the Soundbar

1. With the TV and Soundbar turned off, connect the DIGITAL AUDIO IN (OPTICAL) port on the

Soundbar and the OPTICAL output port on the TV with the optical cable (not supplied), as shown in

the gure.

2. Turn on the Soundbar and TV.

3. Press the (Multi Function) button at the top of the Soundbar or the (Source) button on the

remote control and then select the “Digital Audio In” mode. Then the announcement, “Digital

Audio In” is output.

4. The TV sound is output from the Soundbar.

Page is loading ...

Samsung HW-S60A User manual

This manual is also suitable for

Samsung HW-S60A User manual

Related papers

Other documents