Sanyo NV-E7000, NV-E7000 - Portable GPS And Mobile DVD Entertainment System User manual

  • Hello! I am an AI chatbot trained to assist you with the Sanyo NV-E7000 User manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
SERVICE MANUAL
Portable DVD Navigation
System
NV-E7000
(U.S.A.)
*How to Disassemble
INDEX
Exploded View………………………………………………..pg1
Step 1 Rear Cabinet Assy Removal……………………………..…....pg2
Step 2 PCB Main ROM (screw) Removal…………………………....pg3
Step 3 DVD Mechanism Assy (screw) Removal……………….….....pg4
Step 4 PCB ML Assy Removal………………………………….……pg4
Step 5 PCB-W LCD Assy (screw) Removal……………………..…..pg5
.
Step 6 PCB-W KEY Assy (screw) Removal……………………..…..pg6
Step 7 PCB-W- SENSOR (screw) Removal………………………....pg6
Page 2
REAR CABINET ASSY REMOVAL
Step 1 Remove 4 screws A which fasten the REAR CABINET ASSY, and the Hook (Do
Not Completely Remove Rear Cabinet without performing Step 2)
Step 2 Disconnect FFC, 28P which is connected to the PCB-Main and PCB-LCD
A
A
REAR CABINET ASSY
Hook
PCB- Main
PCB- LCD
FFC, 28P
Page 3
PCB MAIN REMOVAL
Step 1 Remove 6 screws B which fasten the PCB-Main
Step 2 De-Solder the 4 LEAD WIRES
placed on the PCB-Main
Step 3 Disconnect FPC from PCB-Main.
Step 4 Lift PCB-Main up and disconnect FFC, 45P before fully removing PCB-Main (PCB-
Main can now be removed)
B
FFC, 45P
PCB- Main
PCB- Main
LEAD WIRES
LEAD WIRES
FPC
Page 4
DVD MECH.
Step 1 Remove the 3 screws C which fasten the DVD MECH.
Step 2 Disconnect the FFC, 50P
from the DVD MECH. (The DVD MECH. can now be
removed)
PCB-ML
Step 1 Remove 8 screws D which fasten the PCB-ML to the REAR CABINET ASSY.(shown in
the above picture)
Step 2 De-Solder the 2 LEADWIRES
placed on the FAN, MOTER, DC side.(The PCB-ML can
now be removed)
D
D
C
DVD MECH.
FFC, 50P
LEAD WIRES
PCB-ML
Page 5
PCB-W, LCD
Step 1 Remove 2 E screws
Step 2 De-solder 2 LEAD WIRES
Step 3 De-solder 2 COPPER LEADS
Step 4 Disconnect FFC, 6P form PCB-W, KEY (The PCB-W LCD can now be removed)
E
LEAD WIRE /
COPPER LEADS
FFC, 6P
PCB-W, LCD
PCB-W, KEY
Page 6
PCB-W KEY
Step 1 Remove Button Scroll (JOYSTICK)
Step 2 Remove 2 F
screws
Step 3 De-Solder 3 LEAD WIRES
Step 4 Remove 5 G
screws (PCB-W KEY can now be removed)
PCB-W SENSOR
Step 1 Remove 1 H screw (PCB-W SENSOR can now be removed)
PCB-
W KEY
LEAD WIRE
G
G
PCB-W SENSOR-
(H) screw
F
F
PCB-W SENSOR
/