SERVICE MANUAL
Portable DVD Navigation
System
NV-E7000
(U.S.A.)
*How to Disassemble
INDEX
Exploded View………………………………………………..pg1
Step 1 Rear Cabinet Assy Removal……………………………..…....pg2
Step 2 PCB Main ROM (screw) Removal…………………………....pg3
Step 3 DVD Mechanism Assy (screw) Removal……………….….....pg4
Step 4 PCB ML Assy Removal………………………………….……pg4
Step 5 PCB-W LCD Assy (screw) Removal……………………..…..pg5
.
Step 6 PCB-W KEY Assy (screw) Removal……………………..…..pg6
Step 7 PCB-W- SENSOR (screw) Removal………………………....pg6
Page 2
REAR CABINET ASSY REMOVAL
Step 1 Remove 4 screws A which fasten the REAR CABINET ASSY, and the Hook (Do
Not Completely Remove Rear Cabinet without performing Step 2)
Step 2 Disconnect FFC, 28P which is connected to the PCB-Main and PCB-LCD
A
A
REAR CABINET ASSY
Hook
PCB- Main
PCB- LCD
FFC, 28P
Page 3
PCB MAIN REMOVAL
Step 1 Remove 6 screws B which fasten the PCB-Main
Step 2 De-Solder the 4 LEAD WIRES
placed on the PCB-Main
Step 3 Disconnect FPC from PCB-Main.
Step 4 Lift PCB-Main up and disconnect FFC, 45P before fully removing PCB-Main (PCB-
Main can now be removed)
B
FFC, 45P
PCB- Main
PCB- Main
LEAD WIRES
LEAD WIRES
FPC
Page 4
DVD MECH.
Step 1 Remove the 3 screws C which fasten the DVD MECH.
Step 2 Disconnect the FFC, 50P
from the DVD MECH. (The DVD MECH. can now be
removed)
PCB-ML
Step 1 Remove 8 screws D which fasten the PCB-ML to the REAR CABINET ASSY.(shown in
the above picture)
Step 2 De-Solder the 2 LEADWIRES
placed on the FAN, MOTER, DC side.(The PCB-ML can
now be removed)
D
D
C
DVD MECH.
FFC, 50P
LEAD WIRES
PCB-ML
Page 5
PCB-W, LCD
Step 1 Remove 2 E screws
Step 2 De-solder 2 LEAD WIRES
Step 3 De-solder 2 COPPER LEADS
Step 4 Disconnect FFC, 6P form PCB-W, KEY (The PCB-W LCD can now be removed)
E
LEAD WIRE /
COPPER LEADS
FFC, 6P
PCB-W, LCD
PCB-W, KEY
Page 6
PCB-W KEY
Step 1 Remove Button Scroll (JOYSTICK)
Step 2 Remove 2 F
screws
Step 3 De-Solder 3 LEAD WIRES
Step 4 Remove 5 G
screws (PCB-W KEY can now be removed)
PCB-W SENSOR
Step 1 Remove 1 H screw (PCB-W SENSOR can now be removed)
PCB-
W KEY
LEAD WIRE
G
G
PCB-W SENSOR-
(H) screw
F
F
PCB-W SENSOR
-
1
-
2
-
3
-
4
-
5
-
6
-
7
