Linksys PLE400 User manual

Page is loading ...

User

Guide

Linksys PLEK400/PLSK400 Powerline Networking Adapter

2

Getting Started

PLEK400/PLSK400 Powerline Network Adapter

Overview . . . . . . . . . . . . . . .3

Features . . . . . . . . . . . . . . . . . . . . . 3

How Powerline networking works . . . . . . . . . . . 4

Example installation . . . . . . . . . . . . . . . . . . . . . . . 4

Installing the Powerline Network . . . . .5

Installation overview . . . . . . . . . . . . . . . . 5

Tips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

How to share Internet access . . . . . . . . . . . . . 5

How to add a Powerline adapter to your network . . . . . 5

Setting up advanced security . . . . . . . . . . . . . 6

Advanced Conguration . . . . . . . . .6

Troubleshooting . . . . . . . . . . . .8

Specications . . . . . . . . . . . . . 9

Contents

3

Getting Started

PLEK400/PLSK400 Powerline Network Adapter

Overview

Thank you for choosing this Linksys Powerline network adapter kit. These

adapters provide easy setup and let you connect wired network devices to

your home network.

• The PLEK400 kit includes two PLE400 single-port Powerline adapters.

• The PLSK400 kit includes one PLE400 single-port Powerline adapter and

one PLS400 4-port adapter.

You need at least two Powerline adapters to create a Powerline network.

Connect one Powerline adapter to your network router, and connect the other

adapter to a computer or other network device in any room of the house.

You can find more help from our award-winning, 24/7 customer support at

Linksys.com/support.

Features

PLE400

PLS400

Powerline—The Powerline LED turns on when the adapter is

connected to the Powerline network. The LED flashes to indicate

network activity.

Ethernet—The Ethernet LED turns on when a wired network device

is turned on and connected to the adapter’s Ethernet (network) port.

The LED flashes to indicate network activity.

Power—The power LED turns on when the adapter is powered on.

Ethernet—These connect to computers or other network devices.

HomePlug Simple Connect Button—Configures advanced security

(the network password) for your Powerline network.

Standby/Reset—To restore the factory default settings (including

the advanced security settings and the network password), use a

pointed object to press and hold the Standby/Reset button for at

least ten seconds.

4

Getting Started

PLEK400/PLSK400 Powerline Network Adapter

How Powerline networking works

Electrical wiring runs through your home or office, carrying power to electrical

outlets in every room. The typical wired Ethernet network uses Ethernet

network cables to connect your wired network devices. A Powerline network

uses your existing household wiring as the wiring for your Powerline network.

To create your Powerline network, use two or more Powerline adapters. Each

device on your Powerline network requires a connection to a Powerline adapter.

• The PLE400 has one Ethernet port. One of these devices is typically used

in a Powerline network to connect your network’s wireless router to the

household wiring. You can also use one of these in any room to connect

one wired Ethernet device to your Powerline network.

• The PLS400 has four Ethernet ports. Use one of these devices in any

room of your house to connect up to four wired Ethernet devices to your

Powerline network.

When adding a Powerline network to an existing network, the connections

between the Internet, modem, and router stay the same.

Example installation

This diagram shows a basic Powerline network in a house. The router upstairs

is connected to a Powerline adapter, which is plugged into an electrical outlet.

Downstairs, the gaming console and a computer are connected to a 4-port

Powerline adapter, which is plugged into an electrical outlet.

Using the household wiring of the home, the router expands the local network

to include the gaming console and desktop computer in the living room.

Internet access, files, and printers can be shared between the computers and

other networked devices. For online gaming, you can play downstairs in the

comfort of your living room, while using the high-speed Internet connection

of the router and modem upstairs.

Modem

Router

Computer

Gaming

Console

PLE400

PLS400

5

Getting Started

PLEK400/PLSK400 Powerline Network Adapter

Installing the Powerline Network

Installation overview

To set up your Powerline network, you should:

• Make sure you already have Internet access and a working home network.

• Share Internet access with your Powerline network.

• Install Powerline adapters in each room where you want to connect a

wired network device.

Tips

• If possible, connect each Powerline adapter directly to a wall power

outlet, and not to an extension cord, power strip, or surge protector.

• If a Powerline adapter must be installed onto a power strip, make sure

that no other electronic devices are connected to the same power strip.

• For advanced adapter configuration, see “Advanced Configuration” on

page 6.

How to share Internet access

To share Internet access over the Powerline network, connect your router to

the Powerline network (typically with a single-port Powerline adapter such as

the PLE400).

To connect your wireless router to your Powerline network:

1.

Connect your single-port Powerline adapter to a power outlet near your

wireless router. The adapter’s power LED turns on.

2.

Use the included Ethernet network cable to the port on the adapter

and to an available port on the back of the wireless router. The adapter’s

Ethernet LED turns on. You are now ready to extend your Powerline

network to the rest of your home.

NOTE

For advanced security setup, see “Setting up advanced security” on

page 6.

NOTE: For advanced security, cross-ref.

How to add a Powerline adapter to your

network

After your existing network’s router is connected to a Powerline adapter, you

can add adapters elsewhere in your home.

To connect an additional Powerline adapter:

1.

Connect the adapter to a power outlet near the network device(s) you

want to connect. The adapter’s power LED turns on. The Powerline LED

flashes, then stays on when the connection is finished.

2.

Connect the network device’s network cable to an available port on the

Powerline adapter. The adapter’s Ethernet LED flashes, then stays on

when the connection is finished.

6

Getting Started

PLEK400/PLSK400 Powerline Network Adapter

Setting up advanced security

NOTE

The devices connected to the Powerline adapters will temporarily

lose Internet connection during the security setup.

To configure each network adapter with advanced security:

1.

On the first adapter, press and hold the HomePlug Simple Connect

button for at least one second, until the Powerline LED begins

flashing slowly. The adapter creates a new network key for the Powerline

network to use.

2.

On each other adapter, press and hold the HomePlug Simple Connect

button for at least one second, until the Powerline LED begins

flashing slowly. When the LED stops flashing, the new network key has

been shared with that adapter.

NOTE

The devices connected to the adapters will regain Internet access

within five minutes.

Advanced Configuration

If you’re having difficulty connecting the adapters, or if you’d like to set more

advanced options, use the advanced configuration utility.

To install the configuration utility:

1.

Download the utility from the product’s Support page at

Linksys.com/support.

2.

Run the setup file you downloaded, then follow the on-screen

instructions.

To use the configuration utility:

1.

After the utility is installed:

On Windows systems:

a.

Click Start, All Programs, Cisco Systems, then Cisco Powerline AV

Utility. The utility opens.

On Macintosh systems:

a.

Double-click the CD icon on your desktop, then double-click the

Setup icon.

7

Getting Started

PLEK400/PLSK400 Powerline Network Adapter

2.

Click the Network Status tab to view details of the Powerline adapters

that are connected to your network.

3.

Click the Security tab to manually change the network key for each

device. If you need to revert to the default key, click Restore Default Key.

4.

Click the Quality of Service tab to specify how the network prioritizes

network bandwidth.

5.

Click the Administrator tab to restart an adapter, restore factory defaults,

or upgrade the adapter’s firmware.

Settings are applied to the adapter(s) immediately. Close the window to

exit the utility.

8

Getting Started

PLEK400/PLSK400 Powerline Network Adapter

Troubleshooting

None of the LEDs turn on after you installed the Powerline adapter.

Follow these instructions:

1.

Disconnect the adapter from the power outlet.

2.

Disconnect the Ethernet network cable from the adapter.

3.

Wait five seconds.

4.

Re-connect the Ethernet network cable to the adapter.

5.

Re-connect the adapter to the power outlet.

6.

If this solution does not work, make sure that the electrical outlet is

working properly. Plug a different device into the outlet, and try to turn

it on.

The Ethernet LED does not light up on the Powerline adapter.

When the Ethernet port detects a local network connection, the Ethernet LED

should turn on. Follow these instructions:

1.

Make sure that the Ethernet network cable is securely connected to the

adapter.

2.

Make sure that the Ethernet network cable is securely connected to the

computer or other network device.

3.

Make sure that the Ethernet adapter on your computer is working

properly. Refer to Windows Help for more information.

You cannot connect to other computers on your local network or to the

Internet.

If you did not set up advanced security for the Powerline network, follow these

instructions:

1.

Locate the Powerline adapter connected to the computer that cannot

connect.

2.

On the right side of the adapter, use a pointed object to press and

hold the Standby/Reset button for at least ten seconds. This resets the

adapter to its factory default settings.

If you have set up advanced security for the Powerline network, check the

following:

• Make sure all adapters on the Powerline network have been configured

with the same network password. The network password must be

identical in order for them to communicate with each other. See “Setting

up advanced security” on page 6 or “Advanced Configuration” on page 6.

• If you are adding a new adapter to a pre-existing Powerline network

with a unique network password, follow the instructions in “Advanced

Configuration” on page 6.

The LEDs are flashing and I don’t know what it means.

Refer to the following table of LED behavior to help diagnose the problem:

Powerline LED

Off Not connected to Powerline network

Flashing fast Send/Receive data

Flashing slow Pairing

Solid Connected to Powerline network

Ethernet LED

Off Not connected to Ethernet network

Flashing Send/Receive data

Solid Connected to Ethernet network

Power LED

Off Device power off

Solid Device power on and ready

Flashing fast

momentarily

Factory default, Device wakeup from

standby mode

Flashing fast

indefinitely

Pairing error/system error

Flashing slow Device in standby mode

WEB

If your questions are not addressed here, go to the Linksys Support

website at Linksys.com/support.

9

Getting Started

PLEK400/PLSK400 Powerline Network Adapter

Specifications

Model PLE400

Standards HomePlug AV

Ports Fast Ethernet (10/100)

Buttons Easy Connect, Reset

LEDs Powerline, Ethernet, Power

Cabling Type RJ-45 (1)

Security Features 128-Bit AES Link Encryption

Security Key Bits 128

Modulation schemes 1024/256/64/16/8 QAM, QPSK, BPSK, ROBO

Environmental

Dimensions 4.0 × 2.83 × 2.06 inches

(101.9 × 71.9 × 52.4 mm)

Weight 4.1 oz. (116 g)

Power 100-240V AC, 50-60 Hz

Certication FCC, IC, CE, RoHS

Operating Temp. 32ºF to 104ºF (0 to 40ºC)

Storage Temp. -4ºF to 158ºF (-20 to 70ºC)

Operating Humidity 10 to 85% Noncondensing

Storage Humidity 5 to 90% Noncondensing

Model PLS400

Standards HomePlug AV

Ports Fast Ethernet (10/100)

Buttons Easy Connect, Reset

LEDs Powerline, Ethernet, Power

Cabling Type RJ-45 (4)

Security Features 128-Bit AES Link Encryption

Security Key Bits 128

Modulation schemes 1024/256/64/16/8 QAM, QPSK, BPSK, ROBO

Environmental

Dimensions 4.66 × 3.18 × 2.07 inches

(118.4 × 80.9 × 52.7 mm)

Weight 5.6 oz. (160 g)

Power 100-240V AC, 50-60 Hz

Certication FCC, IC, CE, RoHS

Operating Temp. 32ºF to 104ºF (0 to 40ºC)

Storage Temp. -4ºF to 158ºF (-20 to 70ºC)

Operating Humidity 10 to 85% Noncondensing

Storage Humidity 5 to 90% Noncondensing

Specications are subject to change without notice.

3425-01337 111209MS

Cisco, the Cisco logo, and Linksys are trademarks or registered trademarks of Cisco and/or its affiliates in the United States and other countries.

A listing of Cisco’s trademarks can be found at www.cisco.com/go/trademarks. All other trademarks mentioned in this document are the property of their respective owners.

Visit linksys.com/support for award-winning 24/7 technical support

Guía

del usuario

Linksys PLEK400/PLSK400 Adaptador de red PowerLine

Page is loading ...

9

Aan de slag

PLEK400/PLSK400 Powerline-netwerkadapter

Specificaties

Model PLE400

Standaarden HomePlug AV

Poorten Fast Ethernet (10/100)

Knoppen Easy Connect, Reset

LED's Powerline, Ethernet, Power (voeding)

Type bekabeling RJ-45 (1)

Beveiligingsfuncties 128-bits AES Link-versleuteling

Beveiligingssleutelbits 128

Modulatieschema's 1024/256/64/16/8 QAM, QPSK, BPSK, ROBO

Omgeving

Afmetingen

101,9 × 71,9 × 52,4 mm

Gewicht 116 g

Voeding 100-240 V AC, 50-60 Hz

Certicering FCC, IC, CE, RoHS

Bedrijfstemperatuur 0 tot 40 ºC

Opslagtemperatuur -20 tot 70 ºC

Bedrijfsvochtigheid 10 tot 85%, niet-condenserend

Opslagvochtigheid 5 tot 90%, niet-condenserend

Model PLS400

Standaarden HomePlug AV

Poorten Fast Ethernet (10/100)

Knoppen Easy Connect, Reset

LED's Powerline, Ethernet, Power (voeding)

Type bekabeling RJ-45 (4)

Beveiligingsfuncties 128-bits AES Link-versleuteling

Beveiligingssleutelbits 128

Modulatieschema's 1024/256/64/16/8 QAM, QPSK, BPSK, ROBO

Omgeving

Afmetingen

118,4 × 80,9 × 52,7 mm

Gewicht 160 g

Voeding 100-240 V AC, 50-60 Hz

Certicering FCC, IC, CE, RoHS

Bedrijfstemperatuur 0 tot 40 ºC

Opslagtemperatuur -20 tot 70 ºC

Bedrijfsvochtigheid 10 tot 85%, niet-condenserend

Opslagvochtigheid 5 tot 90%, niet-condenserend

Specicaties kunnen zonder kennisgeving worden gewijzigd.

Page is loading ...

Linksys PLE400 User manual

Linksys PLE400 User manual

in other languages

Related papers

Other documents