Gamber-Johnson Independent Rotation Tablet Display Mount Kit Installation guide

Gamber-Johnson
Brand
Gamber-Johnson
Model
Independent Rotation Tablet Display Mount Kit
Category
Input device accessories
Type
Installation guide

This manual is also suitable for

Gamber-Johnson Independent Rotation Tablet Display Mount Kit

This mount kit provides a secure and flexible way to mount your tablet in a variety of locations. The independent rotation feature allows you to easily adjust the viewing angle of your tablet, making it ideal for use in both portrait and landscape orientations. The kit includes all the necessary hardware for mounting your tablet, and it is compatible with most tablets on the market.

Here are some of the features and benefits of the Gamber-Johnson Independent Rotation Tablet Display Mount Kit:

  • Securely mounts your tablet in a variety of locations

Gamber-Johnson Independent Rotation Tablet Display Mount Kit

This mount kit provides a secure and flexible way to mount your tablet in a variety of locations. The independent rotation feature allows you to easily adjust the viewing angle of your tablet, making it ideal for use in both portrait and landscape orientations. The kit includes all the necessary hardware for mounting your tablet, and it is compatible with most tablets on the market.

Here are some of the features and benefits of the Gamber-Johnson Independent Rotation Tablet Display Mount Kit:

  • Securely mounts your tablet in a variety of locations
required. Gamber-Johnson specifically disclaims any responsibility for the improper use or installation of its products not consistent with the original vehicle manufactures specifications
Product Mounting Disclaimer
Gamber-Johnson is not liable under any theory of contract or tort law for any loss, damage, personal injury, special, incidental or consequential damages for personal injury or other damage
of any nature arising directly or indirectly as a result of the improper installation or use of its products in vehicle or any other application. In order to safely install and use Gamber-Johnson
products full consideration of vehicle occupants, vehicle systems (i.e., the location of fuel lines, brakes lines, electrical, drive train or other systems), air-bags and other safety equipment is
and recommendations, Gamber-Johnson product instruction sheets, or workmanship standards as endorsed through the Gamber-Johnson Certified Installer Program.
Rev.B
INST-727
required. Gamber-Johnson specifically disclaims any responsibility for the improper use or installation of its products not consistent with the original vehicle manufactures specifications
Product Mounting Disclaimer
Gamber-Johnson is not liable under any theory of contract or tort law for any loss, damage, personal injury, special, incidental or consequential damages for personal injury or other damage
of any nature arising directly or indirectly as a result of the improper installation or use of its products in vehicle or any other application. In order to safely install and use Gamber-Johnson
products full consideration of vehicle occupants, vehicle systems (i.e., the location of fuel lines, brakes lines, electrical, drive train or other systems), air-bags and other safety equipment is
and recommendations, Gamber-Johnson product instruction sheets, or workmanship standards as endorsed through the Gamber-Johnson Certified Installer Program.
INSTALLATION INSTRUCTIONS
Product Revision Form
If you need assistance or have questions, call Gamber-Johnson at 1-800-456-6868
Printing Spec:
PS-001
LOW PROFILE QUICK RELEASE KEYBOARD TRAY
7160-0857
The 7160-0857 keyboard tray is a keyboard mount that can be used to hold just
about any size keyboard. The keyboard tray consists of the VESA75 hole
pattern. Attach most keyboards by utilizing the AMPS hole patterns and the
provided flat head screws. Strips of adhesive backed Dual Lock are provided in
the hardware bag for customers that choose to use the keyboard tray with a
keyboard that does not have the AMPS pattern.
Tools Needed
Phillips head screw driver
1/2 inch wrench
To remove the top quick release plate -
press and hold the latch button while lifting
slightly and sliding in the shown direction.
1/2
Slide
Press
Lift
© copyright 20
1
7
Gamber
-
Johnson, LLC
Attach the bottom plate of the quick release keyboard tray to a Gamber-Johnson
Clevis (Figure 1), using a 1/2 inch wrench and the 1/4" lock washers, and 1/4-20 x
.50 hex head screws provided in the hardware bag 7120-0734.
Attach the keyboard to the tray using (4) #8-32 x .50 phillips flat head screws or
dual lock adhesive strips.
Mounting the Quick Release Keyboard Tray
FIGURE 1: CLEVIS MOUNT
2/2
Dual Lock
Adhesive Strips
(4) #8-32 x .50
Phillips Flat Head Screw
Keyboard Tray
Bottom Plate
Clevis
(4) 1/4" Split Lock Washers
(4) 1/4-20 x .50
Hex Head Cap Screws
  • Page 1 1
  • Page 2 2

Gamber-Johnson Independent Rotation Tablet Display Mount Kit Installation guide

Gamber-Johnson
Brand
Gamber-Johnson
Model
Independent Rotation Tablet Display Mount Kit
Category
Input device accessories
Type
Installation guide
This manual is also suitable for

Gamber-Johnson Independent Rotation Tablet Display Mount Kit

This mount kit provides a secure and flexible way to mount your tablet in a variety of locations. The independent rotation feature allows you to easily adjust the viewing angle of your tablet, making it ideal for use in both portrait and landscape orientations. The kit includes all the necessary hardware for mounting your tablet, and it is compatible with most tablets on the market.

Here are some of the features and benefits of the Gamber-Johnson Independent Rotation Tablet Display Mount Kit:

  • Securely mounts your tablet in a variety of locations
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents