EN Dear Customer,
Gigaset Communications GmbH is the legal successor to
Siemens Home and Office Communication Devices GmbH &
Co. KG (SHC), which in turn continued the Gigaset business
of Siemens AG. Any statements made by Siemens AG or
SHC that are found in the user guides should therefore be
understood as statements of Gigaset Communications
GmbH
.
We hope you enjoy your Gigaset.
DE Sehr geehrte Kundin, sehr geehrter Kunde,
die Gigaset Communications GmbH ist Rechtsnachfolgerin
der Siemens Home and Office Communication Devices
GmbH & Co. KG (SHC), die ihrerseits das Gigaset-Geschäft
der Siemens AG fortführte. Etwaige Erklärungen der
Siemens AG oder der SHC in den Bedienungsanleitungen
sind daher als Erklärungen der Gigaset Communications
GmbH zu verstehen.
Wir wünschen Ihnen viel Freude mit Ihrem Gigaset.
FR Chère Cliente, Cher Client,
la société Gigaset Communications GmbH succède en droit
à Siemens Home and Office Communication Devices GmbH
& Co. KG (SHC) qui poursuivait elle-même les activités Giga-
set de Siemens AG. Donc les éventuelles explications de Sie-
mens AG ou de SHC figurant dans les modes d’emploi
doivent être comprises comme des explications de Gigaset
Communications GmbH.
Nous vous souhaitons beaucoup d’agrément avec votre
Gigaset.
IT Gentile cliente,
la Gigaset Communications GmbH è successore della Sie-
mens Home and Office Communication Devices GmbH &
Co. KG (SHC) che a sua volta ha proseguito l’attività della
Siemens AG. Eventuali dichiarazioni della Siemens AG o
della SHC nei manuali d’istruzione, vanno pertanto intese
come dichiarazioni della Gigaset Communications GmbH.
Le auguriamo tanta soddisfazione con il vostro Gigaset.
NL Geachte klant,
Gigaset Communications GmbH is de rechtsopvolger van
Siemens Home and Office Communication Devices GmbH &
Co. KG (SHC), de onderneming die de Gigaset-activiteiten
van Siemens AG heeft overgenomen. Eventuele uitspraken
of mededelingen van Siemens AG of SHC in de gebruiksaan-
wijzingen dienen daarom als mededelingen van Gigaset
Communications GmbH te worden gezien.
Wij wensen u veel plezier met uw Gigaset
.
ES Estimado cliente,
la Gigaset Communications GmbH es derechohabiente de la
Siemens Home and Office Communication Devices GmbH &
Co. KG (SHC) que por su parte continuó el negocio Gigaset
de la Siemens AG. Las posibles declaraciones de la
Siemens AG o de la SHC en las instrucciones de uso se
deben entender por lo tanto como declaraciones de la Giga-
set Communications GmbH.
Le deseamos que disfrute con su Gigaset.
PT SCaros clientes,
Gigaset Communications GmbH é a sucessora legal da Sie-
mens Home and Office Communication Devices GmbH &
Co. KG (SHC), que, por sua vez, deu continuidade ao sector
de negócios Gigaset, da Siemens AG. Quaisquer declara-
ções por parte da Siemens AG ou da SHC encontradas nos
manuais de utilização deverão, portanto, ser consideradas
como declarações da Gigaset Communications GmbH.
Desejamos que tenham bons momentos com o seu Gigaset.
DA Kære Kunde,
Gigaset Communications GmbH er retlig efterfølger til Sie-
mens Home and Office Communication Devices GmbH &
Co. KG (SHC), som fra deres side videreførte Siemens AGs
Gigaset-forretninger. Siemens AGs eller SHCs eventuelle
forklaringer i betjeningsvejledningerne skal derfor forstås
som Gigaset Communications GmbHs forklaringer.
Vi håber, du får meget glæde af din Gigaset.
FI Arvoisa asiakkaamme,
Gigaset Communications GmbH on Siemens Home and
Office Communication Devices GmbH & Co. KG (SHC)-yri-
tyksen oikeudenomistaja, joka jatkoi puolestaan Siemens
AG:n Gigaset-liiketoimintaa. Käyttöoppaissa mahdollisesti
esiintyvät Siemens AG:n tai SHC:n selosteet on tämän
vuoksi ymmärrettävä Gigaset Communications GmbH:n
selosteina.
Toivotamme Teille paljon iloa Gigaset-laitteestanne.
SV Kära kund,
Gigaset Communications GmbH övertar rättigheterna från
Siemens Home and Office Communication Devices GmbH &
Co. KG (SHC), som bedrev Gigaset-verksamheten efter Sie-
mens AG. Alla förklaringar från Siemens AG eller SHC i
användarhandboken gäller därför som förklaringar från
Gigaset Communications GmbH.
Vi önskar dig mycket nöje med din Gigaset.
NO Kjære kunde,
Gigaset Communications GmbH er rettslig etterfølger etter
Siemens Home and Office Communication Devices GmbH &
Co. KG (SHC), som i sin tur videreførte Gigaset-geskjeften i
Siemens AG. Eventuelle meddelelser fra Siemens AG eller
SHC i bruksanvisningene er derfor å forstå som meddelelser
fra Gigaset Communications GmbH.
Vi håper du får stor glede av din Gigaset-enhet.
EL Αγαπητή πελάτισσα, αγαπητέ πελάτη,
η Gigaset Communications GmbH είναι η νομική διάδοχος της
Siemens Home and Office Communication Devices GmbH &
Co. KG (SHC), η οποία έχει αναλάβει την εμπορική
δραστηριότητα Gigaset της Siemens AG. Οι δηλώσεις της
Siemens AG ή της SHC στις
οδηγίες χρήσ
ης αποτ
ελούν
επομένως δηλώσεις της Gigaset Communications GmbH.
Σας ευχόμαστε καλή διασκέδαση με τη συσκευή σας Gigaset.
HR Poštovani korisnici,
Gigaset Communications GmbH pravni je sljednik tvrtke
Siemens Home and Office Communication Devices GmbH &
Co. KG (SHC), koji je nastavio Gigaset poslovanje tvrtke
Siemens AG. Zato sve izjave tvrtke Siemens AG ili SHC koje
se nalaze u uputama za upotrebu treba tumačiti kao izjave
tvrtke Gigaset Communications GmbH.
Nadamo se da sa zadovoljstvom koristite svoj Gigaset
uređaj.
SL Spoštovani kupec!
Podjetje Gigaset Communications GmbH je pravni naslednik
podjetja Siemens Home and Office Communication Devices
GmbH & Co. KG (SHC), ki nadaljuje dejavnost znamke
Gigaset podjetja Siemens AG. Vse izjave podjetja Siemens
AG ali SHC v priročnikih za uporabnike torej veljajo kot izjave
podjetja Gigaset Communications GmbH.
Želimo vam veliko užitkov ob uporabi naprave Gigaset.
Issued by
Gigaset Communications GmbH
Schlavenhorst 66, D-46395 Bocholt
Gigaset Communications GmbH is a trademark
licensee of Siemens AG
© Gigaset Communications GmbH 2008
All rights reserved.
Subject to availability. Rights of modifications
reserved.
www.gigaset.com
CS Vážení zákazníci,
společnost Gigaset Communications GmbH je právním
nástupcem společnosti Siemens Home and Office
Communication Devices GmbH & Co. KG (SHC), která dále
přejala segment produktů Gigaset společnosti Siemens AG.
Jakékoli prohlášení společnosti Siemens AG nebo SHC, které
naleznete v uživatelských příručkách, je třeba považovat za
prohlášení společnosti Gigaset Communications GmbH.
Doufáme, že jste s produkty Gigaset spokojeni.
SK Vážený zákazník,
Spoločnosť Gigaset Communications GmbH je právnym
nástupcom spoločnosti Siemens Home and Office
Communication Devices GmbH & Co. KG (SHC), ktorá zasa
pokračovala v činnosti divízie Gigaset spoločnosti Siemens
AG. Z tohto dôvodu je potrebné všetky vyhlásenia
spoločnosti Siemens AG alebo SHC, ktoré sa nachádzajú v
používateľských príručkách, chápať ako vyhlásenia
spoločnosti Gigaset Communications GmbH.
Veríme, že budete so zariadením Gigaset spokojní.
RO Stimate client,
Gigaset Communications GmbH este succesorul legal al
companiei Siemens Home and Office Communication
Devices GmbH & Co. KG (SHC), care, la rândul său, a
continuat activitatea companiei Gigaset a Siemens AG.
Orice afirmaţii efectuate de Siemens AG sau SHC şi incluse
în ghidurile de utilizare vor fi, prin urmare, considerate a
aparţine Gigaset Communications GmbH.
Sperăm ca produsele Gigaset să fie la înălţimea dorinţelor
dvs.
SR Poštovani potrošaču,
Gigaset Communications GmbH je pravni naslednik
kompanije Siemens Home and Office Communication
Devices GmbH & Co. KG (SHC), kroz koju je nastavljeno
poslovanje kompanije Gigaset kao dela Siemens AG. Stoga
sve izjave od strane Siemens AG ili SHC koje se mogu naći u
korisničkim uputstvima treba tuma
čiti kao
izjave kompanije
Gigaset Communications GmbH.
Nadamo se da ćete uživati u korišćenju svog Gigaset
uređaja.
BG Уважаеми потребители,
Gigaset Communications GmbH е правоприемникът на
Siemens Home and Office Communication Devices GmbH
& Co. KG (SHC), която на свой ред продължи бизнеса на
подразделението Siemens AG. По тази причина
всякакви изложения, направени от Siemens AG или
SHC, които се намират в ръководствата за
потребителя, следва да се разбират като изложения на
Gigaset Communications GmbH.
Надяваме се да ползвате с удоволствие вашия Gigaset.
HU T
isztelt Vásárló!
A Siemens Home and Communication Devices GmbH & Co.
KG (SHC) törvényes jogutódja a Gigaset Communications
GmbH, amely a Siemens AG Gigaset üzletágának utódja.
Ebből következően a Siemens AG vagy az SHC felhasználói
kézikönyveiben található bármely kijelentést a Gigaset
Communications GmbH kijelentésének kell tekinteni.
Reméljük, megelégedéssel használja Gigaset készülékét.
PL Szanowny Kliencie,
Firma Gigaset Communications GmbH jest spadkobiercą
prawnym firmy Siemens Home and Office Communication
Devices GmbH & Co. KG (SHC), która z kolei przejęła
segment produktów Gigaset od firmy Siemens AG. Wszelkie
oświadczenia firm Siemens AG i SHC, które można znaleźć
w instrukcjach obsługi, należy traktować jako oświadczenia
firmy Gigaset Communications GmbH.
Życzymy wiele przyjemności z korzystania z produktów
Gigaset.
TR Sayın Müşterimiz,
Gigaset Communications GmbH, Siemens AG'nin Gigaset
işletmesini yürüten Siemens Home and Office
Communication Devices GmbH & Co. KG (SHC)'nin yasal
halefidir. Kullanma kılavuzları nda bulunan ve Siemens AG
veya SHC tarafından yapılan bildiriler Gigaset
Communications GmbH tarafından yapılmış bildiriler olarak
algılanmalıdır.
Gigaset'ten memnun kalmanızı ümit ediyoruz.
RU Уважаемыи покупатель!
Компания Gigaset Communications GmbH является
правопреемником компании Siemens Home and Office
Communication Devices GmbH & Co. KG (SHC), которая,
в св
ою очередь, приняла подразделение Gigaset в свое
управление от компании Siemens AG. Поэтому любые
заявления, сделанные от имени компании Siemens AG
или SHC и встречающиеся в руководствах
пользователя, должны восприниматься как заявления
компании Gigaset Communications GmbH.
Мы надеемся, что продукты Gigaset удовлетворяют
вашим требованиям.
Issued by
Gigaset Communications GmbH
Schlavenhorst 66, D-46395 Bocholt
Gigaset Communications GmbH is a trademark
licensee of Siemens AG
© Gigaset Communications GmbH 2008
All rights reserved.
Subject to availability. Rights of modifications
reserved.
www.gigaset.com
Gigaset USB Adapter DECT / deutsch / A31008-X500-B100-1-19 / Title.fm / 25.08.2003
s
Be inspired
1
Gigaset USB Adapter DECT / ENG / A31008-X500-B100-1-7619 / usb_adapter_baivz.fm / 25.08.2003
Contents
Safety precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Safety precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Trademarks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Information about positioning the adapter . . . . . . . 4
Position and surface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Temperature and environmental conditions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Wireless connection with the Gigaset USB Adapter . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Information about the operating instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
LEDs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
USB socket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Local adapter and Remote adapter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Base and Portable part . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Connecting to your base station . . . . . . . . . . . . . . . . 8
Gigaset 3070/75isdn, Gigaset 4170/75isdn . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
System requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Installing the Gigaset USB Adapter DECT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Resetting the Gigaset USB Adapter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Launching the configuration program . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Registering the Gigaset USB Adapter DECT with the base station . . . . . . . . . . . . . . . 11
Connection tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Local station tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Partner station tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Information about the COM port . . . . . . . . . . . . . 15
Information about operating the adapter . . . . . . 15
Several PCs sharing a base station . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Switching wireless connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
2
Gigaset USB Adapter DECT / ENG / A31008-X500-B100-1-7619 / usb_adapter_baivz.fm / 25.08.2003
Trouble shooting . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Checking the preconditions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Error messages in the configuration program . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Other errors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Technical Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Service (Customer Care) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Guarantee certificate (United Kingdom) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Guarantee certificate (Ireland) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
3
Safety precautions
Gigaset USB Adapter DECT / ENG / A31008-X500-B100-1-7619 / Introduction.fm / 25.08.2003
Safety precautions
Safety precautions
u The operation of medical appliances may be affected.
u The Gigaset USB Adapter DECT can cause a buzzing noise in hearing aids.
u Do not set the Gigaset USB Adapter up in bathrooms.
u Do not use the Gigaset USB Adapter in environments exposed to explosion hazards.
u Avoid the immediate proximity of heat sources such as radiators and do not expose
the Gigaset USB Adapter to direct sunlight.
u Always pass on the Gigaset USB Adapter DECT with the installation instructions and
CD-ROM.
u Use only the supplied USB cable for connecting your USB Adapter to the PC.
u Do not insert or remove the USB cable during a storm. This could cause an electric
shock.
u Do not extend the USB cable. This could lead to higher EMV -radiation.
u Dispose of devices in an environmentally friendly manner as per statutory
requirements.
The Gigaset USB Adapter DECT can be used in those countries listed on the adapter.
Country-specific circumstances have been taken into consideration.
Wireless transmission between the base station and portable part is based on the
DECT Standard. The Gigaset USB Adapter DECT complies with the pertinent European
requirements. Should there nevertheless be any picture and sound interference with
satellite receivers, please consult your retailer to have your satellite receiver equipment
tested for poor shielding.
Trademarks
Microsoft®, Windows® 98SE, Windows® ME, Windows® 2000 and Windows®XP are
registered trademarks of the Microsoft Corporation.
Adobe® Acrobat® is a registered trademark of Adobe Systems Incorporated.
4
Information about positioning the adapter
Gigaset USB Adapter DECT / ENG / A31008-X500-B100-1-7619 / Introduction.fm / 25.08.2003
Information about positioning the adapter
Position and surface
You should not place the Gigaset USB Adapter DECT in the immediate vicinity of other
electronic equipment. Electrical devices can interfere with each other.
Place the Gigaset USB Adapter on a level, non-slip surface. Protect particularly sensitive
surfaces.
Depending on the surroundings, the range for wireless connection outdoors is
approx. 300 m, indoors approx. 50 m.
Temperature and environmental conditions
The Gigaset USB Adapter DECT is designed for use in enclosed rooms with a temperature
range of +5 °C to +45 °C and 20–75% relative humidity.
Overview
Wireless connection with the Gigaset USB Adapter
The Gigaset USB Adapter permits a wireless connection between a PC and a base
station. For example, you can sit in your garden with a Laptop and still surf the Internet.
The Gigaset USB Adapter is supplied with power via the USB port.
i
The Gigaset USB Adapter DECT is connected to the USB interface, but the
PC acts as if it were connected to a COM interface. You will find more
detailed explanations in Chapter "Information about the COM port" on
page 15.
Gigaset
41
75
isdn
Gigaset
4
1
75
isdn
3
2
4
1
Wireless link
or
or
5
Overview
Gigaset USB Adapter DECT / ENG / A31008-X500-B100-1-7619 / Introduction.fm / 25.08.2003
Contents
u 1 Gigaset USB Adapter DECT
u 1 USB connection cable
u 1 CD-ROM
u 1 booklet (9 languages)
Information about the operating instructions
The installation wizard provides direct access to various operating instructions. First
select your languages and then you can either start installation straight away or read the
instructions of the various devices. You should also consult the Readme file on the CD,
as this may contain the latest changes.
LEDs
Operating LED
Data LED
Both LEDs flash alternately
3
2
4
1
Operating LED
Data LED
flashes slowly The Gigaset USB Adapter is looking for the
base station or no base station has been
registered.
constantly
illuminated
The Gigaset USB Adapter has found a
connection to the base station.
off No data transfer
on (flickering) Data transfer active
Operating LED The Gigaset USB Adapter is in registration
mode.
Data LED
6
Overview
Gigaset USB Adapter DECT / ENG / A31008-X500-B100-1-7619 / Introduction.fm / 25.08.2003
USB socket
i
The easiest way to set up your Gigaset USB Adapter is with the installation
wizard, which runs automatically when you insert the CD-ROM.
During installation, the installation wizard will prompt you to insert the
USB cable.
A USB cable can be inserted and removed while the PC is one. If the
connected device has already been set up, Windows will recognise it
automatically.
The first time a new device is connected, Windows will launch its
automatic hardware recognition tool.
If you inserted the USB cable before the installation wizard prompted you
to:
ì
ìì
ì Cancel automatic hardware recognition.
3
2
4
1
3
2
4
1
7
Overview
Gigaset USB Adapter DECT / ENG / A31008-X500-B100-1-7619 / Introduction.fm / 25.08.2003
Local adapter and Remote adapter
You can also determine the settings for the partner station on the local station
(Gigaset USB Adapter).
Base and Portable part
Base station = Gigaset base station
Portable part = handset, device registered with the base station.
Example: Only a Gigaset USB Adapter of type Portable part can have an active
connection to a Gigaset base station.
8
Connecting to your base station
Gigaset USB Adapter DECT / ENG / A31008-X500-B100-1-7619 / Installation.fm / 25.08.2003
Connecting to your base station
The Gigaset USB Adapter DECT can be operated on the following Gigaset base stations:
Gigaset CX100/150isdn, Gigaset SX100/150isdn, Gigaset CX203/235isdn,
Gigaset SX205/255isdn, Gigaset SX303/353isdn, Gigaset 4170/75isdn and
Gigaset 3070/75isdn.
The following operating systems are supported: Windows® 98SE, Windows® NT,
Windows® ME, Windows® 2000 and Windows® XP.
Gigaset 3070/75isdn, Gigaset 4170/75isdn
You have to update the Gigaset SX205/255isdn firmware. The firmware will be updated
automatically if you activate the Check firmware version option during installation.
Installation
System requirements
u PC with operating system Windows® 98SE, NT, ME, 2000 or XP
u 5 MB free hard disk memory
u 1 free USB socket
u 1 CD-ROM drive (or DVD drive)
Installing the Gigaset USB Adapter DECT
The Gigaset USB Adapter should not be connected to the PC when you start installation.
During installation, the installation wizard will prompt you to insert the USB cable. If it
is already inserted, remove it and then re-insert it after a few moments.
ì
ìì
ì Make sure your base station is in idle state.
i
Gigaset Repeater:
The Gigaset Repeater cannot be used to extend the wireless range of the
Gigaset USB Adapter.
Several Gigaset USB Adapters
If you are operating several Gigaset USB Adapters on a base station,
please read Chapter "Several PCs sharing a base station" on page 15.
i
Use the installation wizard to set up your Gigaset USB Adapter. The
installation wizard will make sure that all the necessary settings and
additional software have been included.
i
If a dialogue window appears during installation informing you about a
missing signature, click Continue installation.
9
Installation
Gigaset USB Adapter DECT / ENG / A31008-X500-B100-1-7619 / Installation.fm / 25.08.2003
ì
ìì
ì Insert the CD-ROM into your CD-ROM drive.
The installation wizard will start automatically. If Autostart has been disabled on
your system, launch the installation wizard manually:
– Open Windows Explorer
– Select the CD-ROM drive
–Double-click start.exe.
This will start the installation wizard.
ì
ìì
ì Select the language.
This opens the installation wizard's main menu. You can either read the Readme file or
the Gigaset isdn series operating instructions, open Service & Support on the Internet,
or start installation.
ì
ìì
ì Click Install software.
ì
ìì
ì Select your base station.
ì
ìì
ì If necessary, activate the Check firmware version option (not available for all base
stations).
ì
ìì
ì Only for Gigaset SX205/255isdn, Gigaset SX303/353isdn, Gigaset 4170/75isdn
and Gigaset 3070/75isdn:
Activate the Wireless via Gigaset USB Adapter option.
ì
ìì
ì Only for Gigaset SX205/255isdn, Gigaset SX303/353isdn:
If you want more than the wireless Internet connection, you can install additional
software. You can choose the following software components:
ì
ìì
ì Select the installation folder.
ì
ìì
ì Start installation.
ì
ìì
ì When prompted, connect your Gigaset USB Adapter to your PC.
This will start the Windows automatic hardware recognition.
ì
ìì
ì During hardware recognition, select the option Look for suitable driver for the
device (the exact wording will depend on the Windows operating system you are
using).
ì
ìì
ì Activate the option CD-ROM drives.
!
For Gigaset 4170/75isdn and Gigaset 3070/75isdn you will have to
activate the Check firmware version option.
talk&surf 6.0 The talk&surf software enables you to configure your base station
and connected handsets. You can manage your directory and copy
it to the handsets. You can also view your calls lists and manage the
call charges. For further information please read the talk&surf 6.0
operating instructions.
CAPI You only need the CAPI driver if you want to send faxes using your
PC. For more information please read the Chapter "Installing the
CAPI driver" in the talk&surf 6.0 operating instructions.
FAX You can send faxes from your PC if you connect the Gigaset USB
Adapter directly to the USB port. For more information please read
the corresponding chapter in the talk&surf 6.0 operating
instructions.
10
Installation
Gigaset USB Adapter DECT / ENG / A31008-X500-B100-1-7619 / Installation.fm / 25.08.2003
ì
ìì
ì Click browse and enter the following file: xxx
ì
ìì
ì Confirm installation of the USB driver with OK.
During further installation, the configuration dialogue for your Gigaset USB Adapter will
be opened. The Gigaset USB Adapter is assigned a COM port.
After the USB Adapter has been installed, the wizard will install the software for your
base station and any additional software required.
ì
ìì
ì Confirm successful installation with Close.
ì
ìì
ì Depending on the operating system, you may be prompted to reboot your PC.
Resetting the Gigaset USB Adapter
If you have already started using the Gigaset USB Adapter, but now want to install it with
a different base station, you should first reset the USB Adapter to its default settings. All
the data and registrations you have changed or made will be deleted.
ì
ìì
ì Run the Gigaset USB Adapters configuration program:
Start > Programs > Gigaset > Configuration of USB Adapter
ì
ìì
ì Select the Local adapter tab.
ì
ìì
ì Select Reset and confirm the warning prompt.
ì
ìì
ì You should also reset the registration of the registered partner stations.
ì
ìì
ì Close the configuration program.
After resetting, you can reinstall the T-Sinus 721. Follow the instructions in Chapter
"Installing the Gigaset USB Adapter DECT" on page 8.
i
If you want to install Acrobat® Reader, cancel automatic reboot, install
Acrobat® Reader, and then reboot the PC manually.
11
Configuration
Gigaset USB Adapter DECT / ENG / A31008-X500-B100-1-7619 / Configuration.fm / 25.08.2003
Configuration
Launching the configuration program
The installation wizard opens the configuration program and takes over registration of
your Gigaset USB Adapter. If you want to change the settings later on, run the
configuration program.
ì
ìì
ì Select Start > Programs > Configuration of USB Adapter.
This opens the configuration program. It has four tabs where you can determine the
settings for your Gigaset USB Adapter.
Registering the Gigaset USB Adapter DECT with
thebasestation
To register the USB Adapter with a different base station:
ì
ìì
ì Open the Connection tab.
ì
ìì
ì The Status: section must display Configuration state.
ì
ìì
ì Open the Local adapter tab.
ì
ìì
ì In the Registered %s bases section, choose a free registration location.
ì
ìì
ì Put your base station into registration mode (see the base station operating
instructions).
ì
ìì
ì Click Register.
ì
ìì
ì Enter the base station PIN (1–8 digits, factory setting 0000).
The Gigaset USB Adapter will then register with your base station. After successful
registration, you will find the name of your base station in the Registered %s bases
field.
For detailed explanations of the configuration program, please read the descriptions of
the individual tabs.
If registration is not possible, (base station not ready for registration or not connected
to the power supply, wrong PIN), you will see a message indicating the cause of the
problem.
i
During initial installation, the installation wizard will guide you through
the registration with the base station.
12
Configuration
Gigaset USB Adapter DECT / ENG / A31008-X500-B100-1-7619 / Configuration.fm / 25.08.2003
Connection tab
Connecting the Gigaset USB Adapters DECT to the PC
Data/wireless connection
Serial port: The Gigaset USB Adapter will look for a free COM port for
connection. Manual changing of the setting is only
necessary where several USB adapters are connected to the
same PC/Laptop.
Status: Configuration state, once the port was found. If no port is
found, the field remains empty.
No automatic
detection at program
start-up
Select this option only if more than one Gigaset USB Adapter
is connected. Then select a COM port in the upper pane.
Connection partner: After successful registration, you will find the name of the
connected base station here. If several base stations have
been registered, select the base station your Gigaset USB
Adapter is to set up a connection to.
Field strength: /
Quality:
If your Gigaset USB Adapter has set up a connection to a base
station, this field will show a bar diagram reflecting the
reception strength and quality of the connection. If no
connection is made, the fields remain empty.
Depending on the surroundings, the range for wireless
connection between local and partner station outdoors is
approx. 300 m, indoors approx. 50 m.
Radio link status: With an open connection, you will see Connection set up
here. If no connection is made, the No connection field
remains empty.
Data link status With an open connection, you will see Connection set up
here. If no connection is made, the unknown remains
empty.
13
Configuration
Gigaset USB Adapter DECT / ENG / A31008-X500-B100-1-7619 / Configuration.fm / 25.08.2003
Local station tab
Here you can make all the settings for data transmission, including the settings for the
partner station.
Identification
Registered base stations
You can enter up to six base stations in the window. This allows you to connect the
Gigaset USB Adapter flexibly to the one and then the other base station.
Name The stations' names provide a fast overview. It's best to call
the local station "PC", the partner stations by connected
device, e. g. "Gigaset SX303/353isdn".
You can change a station name by editing or entering the
name in the name field, using letters, digits, space and
special characters. The name must not exceed 20 characters.
Adapter type: Your USB Adapter is operated as extension at the base
station.
Hardware version: /
Firmware version:
The version numbers of the hardware and firmware are
displayed.
Reset Use this function to restore the Gigaset USB Adapter
connected to the PC to its factory settings. You will see a
confirmation prompt which you have to acknowledge. All
the parameters and registrations are returned to their
default values. The partner station is not affected. If you
want to completely delete the connection, you will have to
run the Unregister function at the base station. Only then
are all the connection parameters deleted.
Register Create a new connection.
ì
ìì
ì Select a free registration location or registered base
station.
ì
ìì
ì Put the base station to be connected into registration
mode (see the base station operating instructions).
ì
ìì
ì Click Register.
ì
ìì
ì Enter the base station PIN
(1–8 digits, factory setting 0000).
Unregister Create a new connection.
ì
ìì
ì Select a registered connection.
ì
ìì
ì Click Unregister.
The registered base station is removed from the list.
Connect Connect a registered connection.
ì
ìì
ì Select a registered connection.
ì
ìì
ì Click Connect.
14
Configuration
Gigaset USB Adapter DECT / ENG / A31008-X500-B100-1-7619 / Configuration.fm / 25.08.2003
Partner station tab
When there is a connection, you can view the base station's settings.
ì
ìì
ì Open the Local adapter tab.
ì
ìì
ì Select a registered base station.
ì
ìì
ì Click Connect.
ì
ìì
ì Open the Remote adapter tab.
This displays the base station's settings.
Identification
Registered data terminals
The window shows all the registered devices. On the left is the name, while on the right
the active connection is indicated with a green arrow. If no device is connected, all the
entries in the Remote adapter tab are shown as not active.
Name / Adapter type: /
Hardware version: /
Firmware version:
This displays the data of the connected base station.
15
Information about the COM port
Gigaset USB Adapter DECT / ENG / A31008-X500-B100-1-7619 / Operation.fm / 25.08.2003
Information about the COM port
A COM port is a serial interface on the PC. It can be used to connect external devices
such as a mouse with the PC.
A PC has several COM ports:
u COM 1, COM 2: Hardware-side, sockets on the PC for connecting devices with a
serial connection
u COM 3 etc.: software side, virtual interfaces that can be assigned to devices with
USB connections
Your Gigaset USB Adapter uses one of the software-side interfaces, e.g. COM 3 or
COM 4.
Information about operating the adapter
If you use a Gigaset USB Adapter, you cannot use the channel bundling and fax functions
of your Gigaset base station. Two PCs (one wireless, the other via USB) can however surf
the Internet at the same time.
Several PCs sharing a base station
3
2
4
1
3
2
4
1
Gigaset
4
1
7
5
isdn
Gigaset
4
1
7
5
isdn
Station type: Portable part 1
Base station
Station type: Portable part 2
USB
Wireless operation active
Wireless operation
inactive
16
Information about operating the adapter
Gigaset USB Adapter DECT / ENG / A31008-X500-B100-1-7619 / Operation.fm / 25.08.2003
Example: A PC and Laptop share a Gigaset base station.
u Only one can set up the wireless connection. The connection can however be
switched, see Chapter "Switching wireless connection" on page 16.
u One of the two portable parts and the PC, with which the base station is connected,
can surf the Internet at the same time.
Switching wireless connection
Example: User 1 is using the wireless connection. He wants to terminate the connection
so that participant 2 can use it.
User 1:
ì
ìì
ì Look for the icon for wireless connection in the status area of the tool bar (next to
the clock).
ì
ìì
ì Right-click the wireless connection icon.
ì
ìì
ì Click Deactivate wireless operation or Prepare USB direct operation.
User 2:
ì
ìì
ì Right-click the wireless connection icon.
ì
ìì
ì Click Activate wireless operation.
i
Activate wireless operation: Wireless mode remains deactivated until
the computer is rebooted. Then wireless mode will be activated again.
Prepare USB direct operation: Wireless mode remains deactivated until
it is activated again manually. Rebooting the computer does not
automatically activate wireless mode.
Icon
Taskbar
Activate wireless operation
Deactivate wireless operation
Prepare USB direct operation
Activate wireless operation
Deactivate wireless operation
Prepare USB direct operation
17
Trouble shooting
Gigaset USB Adapter DECT / ENG / A31008-X500-B100-1-7619 / Troubleshooting.fm / 25.08.2003
Trouble shooting
Checking the preconditions
In the event of problems, check the following first:
u All cables have been properly connected.
u Is the distance between the base station and the portable part too large? If this could
be the case, place the devices next to each other for testing. If the connection can
now be set up, gradually increase the distance and check the connection quality in
the Connection tab of the configuration program. You will find more information in
Chapter "Information about positioning the adapter" on page 4.
u Was registration error-free? If not, try repeating installation.
Error messages in the configuration program
Error message Cause Remedy
No Gigaset USB
Adapter DECT could be
found
The COM port is being used by
another program.
Close the application using
the COM port. The device
manager in the Windows
control panel will show you
how the ports are being
used at the moment.
Registration not
possible.
The base station may not be
in registration mode or the
wireless connection is
interrupted.
Repeat registration with the
base station in registration
mode. See "Registering the
Gigaset USB Adapter DECT
with the base station" on
page 11.
PIN is incorrect. The PIN entered does not
match the valid PIN.
If you have forgotten your
PIN, reset the Gigaset USB
Adapter to the factory
setting, see Chapter
"Resetting the Gigaset USB
Adapter" on page 10.
In factory setting, the PIN is
0000.
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
Siemens Gigaset USB Adapter DECT Operating Instructions Manual
- Type
- Operating Instructions Manual
- This manual is also suitable for
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
in other languages
Related papers
-
Siemens Gigaset-SE361 Owner's manual
-
-
-
-
-
-
-
-
-
