3
. Notes and Precautions
z You must connect the AC adapter for full I/O functionality.
z DO NOT touch the connectors of the Office Dock.
z DO NOT attempt to make connections if there is any object between the
computer and the Office Dock. Doing so could damage the computer and
the Office Dock.
z DO NOT attempt to move the Office Dock when it is connected to the
computer.
z If the computer malfunctions while the Office Dock is connected, turn off
the computer and disconnect the Office Dock. Connect the AC adapter to
the computer and check to see if the computer operates normally. If the
computer operates normally, the Office Dock may be malfunctioning.
z DO NOT place metal objects or containers of liquid on top of the Office
Dock. If paper clips, coins, or other metal objects, or water, or other
liquid spills, get inside the Office Dock, fire or electric shock may result.
Immediately unplug the power cable and remove the computer from the
Office Dock.
z Unplug the power cord and remove the computer from the Office Dock
if any of the following malfunctions occur:
– the Office Dock is damaged
– smoke is emitted
– an unusual smell is emitted
– the Office Dock is unusually hot
Continuing to use the Office Dock while any of the above conditions are
present may result in fire or electric shock.
Rugged Mobile Computing Solutions
X500
OFFICE DOCK
OPERATION GUIDE
561512800006 R01
3
. Notes and Precautions
z You must connect the AC adapter for full I/O functionality.
z DO NOT touch the connectors of the Office Dock.
z DO NOT attempt to make connections if there is any object between the
computer and the Office Dock. Doing so could damage the computer and
the Office Dock.
z DO NOT attempt to move the Office Dock when it is connected to the
computer.
z If the computer malfunctions while the Office Dock is connected, turn off
the computer and disconnect the Office Dock. Connect the AC adapter to
the computer and check to see if the computer operates normally. If the
computer operates normally, the Office Dock may be malfunctioning.
z DO NOT place metal objects or containers of liquid on top of the Office
Dock. If paper clips, coins, or other metal objects, or water, or other
liquid spills, get inside the Office Dock, fire or electric shock may result.
Immediately unplug the power cable and remove the computer from the
Office Dock.
z Unplug the power cord and remove the computer from the Office Dock
if any of the following malfunctions occur:
– the Office Dock is damaged
– smoke is emitted
– an unusual smell is emitted
– the Office Dock is unusually hot
Continuing to use the Office Dock while any of the above conditions are
present may result in fire or electric shock.
Rugged Mobile Computing Solutions
X500
OFFICE DOCK
OPERATION GUIDE
561512800006 R01
1
. Introduction
The Office Dock makes your X500 a desktop computer. With peripheral
devices such as the keyboard, mouse, monitor, and printer all connected to
the Office Dock, you have a handy work area on your desk. There are no
hassles of disconnecting or connecting the various cables whenever you
have to carry X500 between your desk and elsewhere.
2
. Installation
1. Connect the AC adapter to the Office Dock.
2. Disconnect all cables from your X500 and turn off the power.
3. Slide and open the docking connector cover on the bottom of X500.
4. Align X500 with the corner brackets and guide pins on the Office Dock
and put down X500 on the dock.
5. Connect the cables of your peripheral devices to the corresponding
connectors on your Office Dock.
See reverse side for notes and precautions.
Power Connector
Audio Output Connector
Microphone Connector
RS232 Serial Port
Docking Connector
Guide Pin
DVI Port
RJ45 LAN1 Connector
USB Port x 4
VGA Connector
Guide Pin
Corner Bracket
Corner Bracket
1
. Introduction
The Office Dock makes your X500 a desktop computer. With peripheral
devices such as the keyboard, mouse, monitor, and printer all connected to
the Office Dock, you have a handy work area on your desk. There are no
hassles of disconnecting or connecting the various cables whenever you
have to carry X500 between your desk and elsewhere.
2
. Installation
1. Connect the AC adapter to the Office Dock.
2. Disconnect all cables from your X500 and turn off the power.
3. Slide and open the docking connector cover on the bottom of X500.
4. Align X500 with the corner brackets and guide pins on the Office Dock
and put down X500 on the dock.
5. Connect the cables of your peripheral devices to the corresponding
connectors on your Office Dock.
See reverse side for notes and precautions.
Power Connector
Audio Output Connector
Microphone Connector
RS232 Serial Port
Docking Connector
Guide Pin
DVI Port
RJ45 LAN1 Connector
USB Port x 4
VGA Connector
Guide Pin
Corner Bracket
Corner Bracket
3
. Notes and Precautions
z You must connect the AC adapter for full I/O functionality.
z DO NOT touch the connectors of the Office Dock.
z DO NOT attempt to make connections if there is any object between the
computer and the Office Dock. Doing so could damage the computer and
the Office Dock.
z DO NOT attempt to move the Office Dock when it is connected to the
computer.
z If the computer malfunctions while the Office Dock is connected, turn off
the computer and disconnect the Office Dock. Connect the AC adapter to
the computer and check to see if the computer operates normally. If the
computer operates normally, the Office Dock may be malfunctioning.
z DO NOT place metal objects or containers of liquid on top of the Office
Dock. If paper clips, coins, or other metal objects, or water, or other
liquid spills, get inside the Office Dock, fire or electric shock may result.
Immediately unplug the power cable and remove the computer from the
Office Dock.
z Unplug the power cord and remove the computer from the Office Dock
if any of the following malfunctions occur:
– the Office Dock is damaged
– smoke is emitted
– an unusual smell is emitted
– the Office Dock is unusually hot
Continuing to use the Office Dock while any of the above conditions are
present may result in fire or electric shock.
Rugged Mobile Computing Solutions
X500
OFFICE DOCK
OPERATION GUIDE
561512800006 R01
3
. Notes and Precautions
z You must connect the AC adapter for full I/O functionality.
z DO NOT touch the connectors of the Office Dock.
z DO NOT attempt to make connections if there is any object between the
computer and the Office Dock. Doing so could damage the computer and
the Office Dock.
z DO NOT attempt to move the Office Dock when it is connected to the
computer.
z If the computer malfunctions while the Office Dock is connected, turn off
the computer and disconnect the Office Dock. Connect the AC adapter to
the computer and check to see if the computer operates normally. If the
computer operates normally, the Office Dock may be malfunctioning.
z DO NOT place metal objects or containers of liquid on top of the Office
Dock. If paper clips, coins, or other metal objects, or water, or other
liquid spills, get inside the Office Dock, fire or electric shock may result.
Immediately unplug the power cable and remove the computer from the
Office Dock.
z Unplug the power cord and remove the computer from the Office Dock
if any of the following malfunctions occur:
– the Office Dock is damaged
– smoke is emitted
– an unusual smell is emitted
– the Office Dock is unusually hot
Continuing to use the Office Dock while any of the above conditions are
present may result in fire or electric shock.
Rugged Mobile Computing Solutions
X500
OFFICE DOCK
OPERATION GUIDE
561512800006 R01
1
. Introduction
The Office Dock makes your X500 a desktop computer. With peripheral
devices such as the keyboard, mouse, monitor, and printer all connected to
the Office Dock, you have a handy work area on your desk. There are no
hassles of disconnecting or connecting the various cables whenever you
have to carry X500 between your desk and elsewhere.
2
. Installation
1. Connect the AC adapter to the Office Dock.
2. Disconnect all cables from your X500 and turn off the power.
3. Slide and open the docking connector cover on the bottom of X500.
4. Align X500 with the corner brackets and guide pins on the Office Dock
and put down X500 on the dock.
5. Connect the cables of your peripheral devices to the corresponding
connectors on your Office Dock.
See reverse side for notes and precautions.
Power Connector
Audio Output Connector
Microphone Connector
RS232 Serial Port
Docking Connector
Guide Pin
DVI Port
RJ45 LAN1 Connector
USB Port x 4
VGA Connector
Guide Pin
Corner Bracket
Corner Bracket
1
. Introduction
The Office Dock makes your X500 a desktop computer. With peripheral
devices such as the keyboard, mouse, monitor, and printer all connected to
the Office Dock, you have a handy work area on your desk. There are no
hassles of disconnecting or connecting the various cables whenever you
have to carry X500 between your desk and elsewhere.
2
. Installation
1. Connect the AC adapter to the Office Dock.
2. Disconnect all cables from your X500 and turn off the power.
3. Slide and open the docking connector cover on the bottom of X500.
4. Align X500 with the corner brackets and guide pins on the Office Dock
and put down X500 on the dock.
5. Connect the cables of your peripheral devices to the corresponding
connectors on your Office Dock.
See reverse side for notes and precautions.
Power Connector
Audio Output Connector
Microphone Connector
RS232 Serial Port
Docking Connector
Guide Pin
DVI Port
RJ45 LAN1 Connector
USB Port x 4
VGA Connector
Guide Pin
Corner Bracket
Corner Bracket
S046 561512800006R01 Press sheet:888*634mm 150LPI( July 5, 2012 12:17:02)
35125 R01
3
. Notes and Precautions
z You must connect the AC adapter for full I/O functionality.
z DO NOT touch the connectors of the Office Dock.
z DO NOT attempt to make connections if there is any object between the
computer and the Office Dock. Doing so could damage the computer and
the Office Dock.
z DO NOT attempt to move the Office Dock when it is connected to the
computer.
z If the computer malfunctions while the Office Dock is connected, turn off
the computer and disconnect the Office Dock. Connect the AC adapter to
the computer and check to see if the computer operates normally. If the
computer operates normally, the Office Dock may be malfunctioning.
z DO NOT place metal objects or containers of liquid on top of the Office
Dock. If paper clips, coins, or other metal objects, or water, or other
liquid spills, get inside the Office Dock, fire or electric shock may result.
Immediately unplug the power cable and remove the computer from the
Office Dock.
z Unplug the power cord and remove the computer from the Office Dock
if any of the following malfunctions occur:
– the Office Dock is damaged
– smoke is emitted
– an unusual smell is emitted
– the Office Dock is unusually hot
Continuing to use the Office Dock while any of the above conditions are
present may result in fire or electric shock.
Rugged Mobile Computing Solutions
X500
OFFICE DOCK
OPERATION GUIDE
561512800006 R01
3
. Notes and Precautions
z You must connect the AC adapter for full I/O functionality.
z DO NOT touch the connectors of the Office Dock.
z DO NOT attempt to make connections if there is any object between the
computer and the Office Dock. Doing so could damage the computer and
the Office Dock.
z DO NOT attempt to move the Office Dock when it is connected to the
computer.
z If the computer malfunctions while the Office Dock is connected, turn off
the computer and disconnect the Office Dock. Connect the AC adapter to
the computer and check to see if the computer operates normally. If the
computer operates normally, the Office Dock may be malfunctioning.
z DO NOT place metal objects or containers of liquid on top of the Office
Dock. If paper clips, coins, or other metal objects, or water, or other
liquid spills, get inside the Office Dock, fire or electric shock may result.
Immediately unplug the power cable and remove the computer from the
Office Dock.
z Unplug the power cord and remove the computer from the Office Dock
if any of the following malfunctions occur:
– the Office Dock is damaged
– smoke is emitted
– an unusual smell is emitted
– the Office Dock is unusually hot
Continuing to use the Office Dock while any of the above conditions are
present may result in fire or electric shock.
Rugged Mobile Computing Solutions
X500
OFFICE DOCK
OPERATION GUIDE
561512800006 R01
1
. Introduction
The Office Dock makes your X500 a desktop computer. With peripheral
devices such as the keyboard, mouse, monitor, and printer all connected to
the Office Dock, you have a handy work area on your desk. There are no
hassles of disconnecting or connecting the various cables whenever you
have to carry X500 between your desk and elsewhere.
2
. Installation
1. Connect the AC adapter to the Office Dock.
2. Disconnect all cables from your X500 and turn off the power.
3. Slide and open the docking connector cover on the bottom of X500.
4. Align X500 with the corner brackets and guide pins on the Office Dock
and put down X500 on the dock.
5. Connect the cables of your peripheral devices to the corresponding
connectors on your Office Dock.
See reverse side for notes and precautions.
Power Connector
Audio Output Connector
Microphone Connector
RS232 Serial Port
Docking Connector
Guide Pin
DVI Port
RJ45 LAN1 Connector
USB Port x 4
VGA Connector
Guide Pin
Corner Bracket
Corner Bracket
1
. Introduction
The Office Dock makes your X500 a desktop computer. With peripheral
devices such as the keyboard, mouse, monitor, and printer all connected to
the Office Dock, you have a handy work area on your desk. There are no
hassles of disconnecting or connecting the various cables whenever you
have to carry X500 between your desk and elsewhere.
2
. Installation
1. Connect the AC adapter to the Office Dock.
2. Disconnect all cables from your X500 and turn off the power.
3. Slide and open the docking connector cover on the bottom of X500.
4. Align X500 with the corner brackets and guide pins on the Office Dock
and put down X500 on the dock.
5. Connect the cables of your peripheral devices to the corresponding
connectors on your Office Dock.
See reverse side for notes and precautions.
Power Connector
Audio Output Connector
Microphone Connector
RS232 Serial Port
Docking Connector
Guide Pin
DVI Port
RJ45 LAN1 Connector
USB Port x 4
VGA Connector
Guide Pin
Corner Bracket
Corner Bracket
3
. Notes and Precautions
z You must connect the AC adapter for full I/O functionality.
z DO NOT touch the connectors of the Office Dock.
z DO NOT attempt to make connections if there is any object between the
computer and the Office Dock. Doing so could damage the computer and
the Office Dock.
z DO NOT attempt to move the Office Dock when it is connected to the
computer.
z If the computer malfunctions while the Office Dock is connected, turn off
the computer and disconnect the Office Dock. Connect the AC adapter to
the computer and check to see if the computer operates normally. If the
computer operates normally, the Office Dock may be malfunctioning.
z DO NOT place metal objects or containers of liquid on top of the Office
Dock. If paper clips, coins, or other metal objects, or water, or other
liquid spills, get inside the Office Dock, fire or electric shock may result.
Immediately unplug the power cable and remove the computer from the
Office Dock.
z Unplug the power cord and remove the computer from the Office Dock
if any of the following malfunctions occur:
– the Office Dock is damaged
– smoke is emitted
– an unusual smell is emitted
– the Office Dock is unusually hot
Continuing to use the Office Dock while any of the above conditions are
present may result in fire or electric shock.
Rugged Mobile Computing Solutions
X500
OFFICE DOCK
OPERATION GUIDE
561512800006 R01
3
. Notes and Precautions
z You must connect the AC adapter for full I/O functionality.
z DO NOT touch the connectors of the Office Dock.
z DO NOT attempt to make connections if there is any object between the
computer and the Office Dock. Doing so could damage the computer and
the Office Dock.
z DO NOT attempt to move the Office Dock when it is connected to the
computer.
z If the computer malfunctions while the Office Dock is connected, turn off
the computer and disconnect the Office Dock. Connect the AC adapter to
the computer and check to see if the computer operates normally. If the
computer operates normally, the Office Dock may be malfunctioning.
z DO NOT place metal objects or containers of liquid on top of the Office
Dock. If paper clips, coins, or other metal objects, or water, or other
liquid spills, get inside the Office Dock, fire or electric shock may result.
Immediately unplug the power cable and remove the computer from the
Office Dock.
z Unplug the power cord and remove the computer from the Office Dock
if any of the following malfunctions occur:
– the Office Dock is damaged
– smoke is emitted
– an unusual smell is emitted
– the Office Dock is unusually hot
Continuing to use the Office Dock while any of the above conditions are
present may result in fire or electric shock.
Rugged Mobile Computing Solutions
X500
OFFICE DOCK
OPERATION GUIDE
561512800006 R01
1
. Introduction
The Office Dock makes your X500 a desktop computer. With peripheral
devices such as the keyboard, mouse, monitor, and printer all connected to
the Office Dock, you have a handy work area on your desk. There are no
hassles of disconnecting or connecting the various cables whenever you
have to carry X500 between your desk and elsewhere.
2
. Installation
1. Connect the AC adapter to the Office Dock.
2. Disconnect all cables from your X500 and turn off the power.
3. Slide and open the docking connector cover on the bottom of X500.
4. Align X500 with the corner brackets and guide pins on the Office Dock
and put down X500 on the dock.
5. Connect the cables of your peripheral devices to the corresponding
connectors on your Office Dock.
See reverse side for notes and precautions.
Power Connector
Audio Output Connector
Microphone Connector
RS232 Serial Port
Docking Connector
Guide Pin
DVI Port
RJ45 LAN1 Connector
USB Port x 4
VGA Connector
Guide Pin
Corner Bracket
Corner Bracket
1
. Introduction
The Office Dock makes your X500 a desktop computer. With peripheral
devices such as the keyboard, mouse, monitor, and printer all connected to
the Office Dock, you have a handy work area on your desk. There are no
hassles of disconnecting or connecting the various cables whenever you
have to carry X500 between your desk and elsewhere.
2
. Installation
1. Connect the AC adapter to the Office Dock.
2. Disconnect all cables from your X500 and turn off the power.
3. Slide and open the docking connector cover on the bottom of X500.
4. Align X500 with the corner brackets and guide pins on the Office Dock
and put down X500 on the dock.
5. Connect the cables of your peripheral devices to the corresponding
connectors on your Office Dock.
See reverse side for notes and precautions.
Power Connector
Audio Output Connector
Microphone Connector
RS232 Serial Port
Docking Connector
Guide Pin
DVI Port
RJ45 LAN1 Connector
USB Port x 4
VGA Connector
Guide Pin
Corner Bracket
Corner Bracket
S046 561512800006R01 Press sheet:888*634mm 150LPI( July 5, 2012 12:17:02)
35125 R01
-
1
-
2
Getac X500(52621280XXXX) User manual
- Type
- User manual
- This manual is also suitable for
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
Other documents
-
Toshiba EXT103I-P Datasheet
-
Epson Multimedia Projector User manual
-
-
HP H7A27AAE Datasheet
-
Tesvor X500 User manual
-
Siemens Gigaset Optical LAN Adapter Duo Operating Instructions Manual
-
-
-
Cambridge Audio minx Series Installation guide
-