Honeywell M6422L1003 Owner's manual

Type
Owner's manual

Honeywell M6422L1003 is a rotary actuator designed for use exclusively with the V5421B1090 Butterfly Valve. It is suitable for applications in stationary heating, air conditioning, and ventilation systems. It features adjustable orientation in 90° steps, overload protection, and automatic stopping at limits, eliminating the need for limit switches. With a nominal torque of 40 Nm, it provides reliable operation.

Honeywell M6422L1003 is a rotary actuator designed for use exclusively with the V5421B1090 Butterfly Valve. It is suitable for applications in stationary heating, air conditioning, and ventilation systems. It features adjustable orientation in 90° steps, overload protection, and automatic stopping at limits, eliminating the need for limit switches. With a nominal torque of 40 Nm, it provides reliable operation.

® U.S. Registered Trademark
Copyright © 2008 Honeywell Inc. • All Rights Reserved EN0B-0626GE51 R0108
M6422L1003
ROTARY ACTUATOR FOR BUTTERFLY VALVE V5421B1090
PRODUCT DATA
GENERAL
The M6422L1003 Rotary Actuator is a maintenance-free
device designed for use in combination with only the
V5421B1090 Butterfly Valve. It is suitable for applications in
stationary heating, air conditioning, and ventilation systems. It
is not intended other applications, especially not in aircraft.
2
L1N
3
1
ON/OFF CONTROL
2
0
L1N
3
1
3-POINT CONTROL
ROTARY DRIVE ROTARY VALVE
A
- AB = 0%
Fig. 1. Wiring
FEATURES
Orientation of actuator to V5421B1090 Butterfly Valve can
be re-adjusted in steps of 90°
Protected against overloading
Requires no limit switches (actuator stops automatically at
limit)
SPECIFICATIONS
Nominal voltage 100 … 240 Vac, 50/60 Hz
Operating range 85 … 265 V
Power consumption
At nominal torque of 40 Nm 4 W / 7 VA
At rest 2 W
Parallel operation possible (note power
consumption data)
Torque (nominal) min. 40 Nm (at nominal
voltage)
Manual adjustment pushbutton gear declutch
(temporary/permanent)
Run time 150 s / 90° angle
Noise level max. 45 dB (A)
Position indication mechanical, attachable
Protection Class II
Protection Standard IP54 (regardless of
orientation)
EMC CE as per EEC/89/336
Low-Voltage Directive CE as per EEC/73/23
Action type 1 (as per EN 60730-1)
Rated surge voltage 4 kV (as per EN 60730-1)
Pollution degree 3 (as per EN 60730-1)
Ambient temperature 0 … +50 °C
Temperature of medium 0 … 90 °C in valve
Storage temperature -40 … +80 °C
Ambient humidity 95% r.H., non-condensing
Weight approx. 1.85 kg
Dimensions see "Dimensions," pg. 2
Accessories auxiliary switch
reverse potentiometer
M6422L1003 ROTARY ACTUATOR – PRODUCT DATA
Manufactured for and on behalf of the Environmental and Combustion Controls Division of Honeywell Technologies Sàrl, Ecublens, Route du Bois 37, Switzerland by its Authorized Representative:
Automation and Control Solutions
Honeywell GmbH
Böblinger Straße 17
D-71101 Schönaich
Phone: (49) 7031 63701
Fax: (49) 7031 637493
http://ecc.emea.honeywell.com
Subject to change without notice. Printed in Germany
EN0B-0626GE51 R0208
DIMENSIONS
18358
44 151
R10
47.5°
45°
124
97
70
116
8
122
246
167
60
IN COMBINATION WITH THE V5421B1090 BUTTERFLY VALVE
Fig. 2. Dimensions of M6422L1003 (in mm)
  • Page 1 1
  • Page 2 2

Honeywell M6422L1003 Owner's manual

Type
Owner's manual

Honeywell M6422L1003 is a rotary actuator designed for use exclusively with the V5421B1090 Butterfly Valve. It is suitable for applications in stationary heating, air conditioning, and ventilation systems. It features adjustable orientation in 90° steps, overload protection, and automatic stopping at limits, eliminating the need for limit switches. With a nominal torque of 40 Nm, it provides reliable operation.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI