Page is loading ...
® U.S. Registered Trademark MU1B-0559GE51 R0616B
Copyright © 2016 Honeywell Inc. All Rights Reserved
D Montageanweisung
XL2000HMI-A, XL2000HMI-BASE
DK Installationsvejledning
ES Instrucciones de montaje
F Instructions d'installation
I Istruzioni di montaggio
N Installationsinstruktioner
NL Installatievoorschrift
P Instruções de montagem
S Installation instruktioner
FI Asennusohje
PL Instrukcja montażu
MOUNTING INSTRUCTIONS
E Keep these instructions together with the
device or with the equipment
documentation!
F Cette instruction est à conserver avec le
contrôleur ou avec la documentation de
l'installation !
P Guarde estas instru
ς
ões junto do regulador
ou junto da documentaςão da instalaςão!
D Diese Anleitung ist beim Gerät oder in der
Anlagendokumentation aufzubewahren!
I Queste istruzioni devono essere conservate
insieme al lettore o con la documentazione
dell´impianto!
S Denna instruktion skall förvaras tillsammans
med regler eller
anlä
gg
nin
g
sdokumentationen!
DK Opbevar denne vejledning sammen med
regler eller med anlægsdokumentationen!
N Denne veiledningen skal oppbevares
sammen med regler eller anleggs-
dokumentas
j
onen!
FI Tätä ohjetta tulee säilyttää laitteen
läheisyydessä tai yhdessä muiden
dokumenttien kanssa!
ES Conserve estas instrucciones con el recalar
o con la documentación de la instalación.
NL Deze handleiding moet bij de regelaar, of
met de documentatie van de installatie
worden bewaard!
PL Instrukcję obsługi należy przechowywać
przy urządzeniu albo w dokumentacji
techniczne
j
.
0A: INFO! 0B: DIMENSIONS (WITHOUT COVER)
X
L2000HMI-A
(EN0B-0712GE51)
PRODUCT DATA
XL2000HMI-A, XL2000HMI-BASE
(MU1B-0559GE51)
MOUNTING INSTRUCTIONS
XL2000HMI-A, XL2000HMI-BASE
(MU1B-0559GE51)
MOUNTING INSTRUCTIONS
BACK COVER MAGNETS
i
XL2000HMI-A
XL2000HMI-BASE
178
78
65.5
35.5
35.5
32
78
178
28.2
25.2
UPUP
35
X
L2000HMI-A
X
L2000HMI-BASE
68
XL2000HMI-A, XL2000-BASE - MOUNTING INSTRUCTIONS
MU1B-0559GE51 R0616B 2
1: SCREW-MOUNTING INTO CUT-OUT (1A + 1B) 1A: MAKE CUT-OUT (a) + ATTACH CABLE (b + c / c')
1
1‘
1‘‘
166 mm
157 mm
58 mm
Ø 5 mm
1...2.5
mm
CLICK!
b
c
a
c‘
1B: INSERT XL2000HMI-A (a) + SCREWS (b) 2: MOUNTING ONTO MAGNETIC SURFACE (2A + 2B + 2C)
b b
a
XL2000HMI-A, XL2000-BASE - MOUNTING INSTRUCTIONS
3 MU1B-0559GE51 R0616B
2A: INSERT MAGNETS (a + b + c + d + e + f) 2B: ATTACH XL2000HMI-BASE (a + b) + CABLE (c + d / d')
c
d
ef
CLICK!
CLICK!
CLICK!
CLICK!
a
b
a
CLICK!
CLICK!
CLICK!
CLICK!
b
c
CLICK!
d
d‘
2C: ATTACH HMI (a) 3: HAND-HELD OPTION (2A + 2B + 3a)
a
3a
XL2000HMI-A, XL2000-BASE - MOUNTING INSTRUCTIONS
Manufactured for and on behalf of the Environmental & Energy Solutions Division of Honeywell Technologies Sàrl, Rolle, Z.A. La Pièce 16, Switzerland by its Authorized Representative:
Automation and Control Solutions
Honeywell GmbH
Böblinger Strasse 17
71101 Schönaich / Germany
Phone: (49) 7031 637 - 01
Fax: (49) 7031 637 - 493
http://ecc.emea.honeywell.com
Subject to change without notice. Printed in Germany
MU1B-0559GE51 R0616B
4: SCREW-MOUNTING ONTO WALL (4A + 4B + 4C) 4A: DRILL HOLES (a) + INSERT DOWELS (b)
164
Ø 6
bb
a a
MIN. 35
MAX. 140
MAX. 65
OPTIONAL
4B: POSITION XL2000HMI-BASE + CABLE (a / a' / a'') 4C: INSERT SCREWS (a) + CABLE (2B) + INSERT HMI (b)
a
a‘
a‘‘ a a
b
/
